Effectiveness of compacted soil liner as a gas barrier layer in the landfill final cover system

A compacted soil liner (CSL) has been widely used as a single barrier layer or a part of composite barrier layer in the landfill final cover system to prevent water infiltration into solid wastes for its acceptable hydraulic permeability. This study was conducted to test whether the CSL was also effective in prohibiting landfill gas emissions. For this purpose, three different compaction methods (i.e., reduced, standard, and modified Proctor methods) were used to prepare the soil specimens, with nitrogen as gas, and with water and heptane as liquid permeants. Measured gas permeability ranged from 2.03x10(-10) to 4.96x10(-9)cm(2), which was a magnitude of two or three orders greater than hydraulic permeability (9.60x10(-13) to 1.05x10(-11)cm(2)). The difference between gas and hydraulic permeabilities can be explained by gas slippage, which makes gas more permeable, and by soil-water interaction, which impedes water flow and then makes water less permeable. This explanation was also supported by the result that a liquid permeability measured with heptane as a non-polar liquid was similar to the intrinsic gas permeability. The data demonstrate that hydraulic requirement for the CSL is not enough to control the gas emissions from a landfill.     

Enhancement of turbulent scalar mixing and its application by a multihole nozzle in selective catalytic reduction of NOx

The mixing characteristics of a passive scalar in the turbulent flow of a selective catalytic reduction process were numerically and experimentally investigated, focusing especially on an injection nozzle with multiple holes for the reducing agent. The multihole injection nozzle studied has six holes that are perpendicular to the ambient flue gas flow and are located near the tip of the nozzle. Large eddy simulation was applied to the turbulent flow and mixing fields to elucidate the mixing mechanism of the proposed nozzle compared with the single-hole nozzle that is commonly used in the conventional selective catalytic reduction process. From the results, there exist broader regions of higher turbulent intensities for the multihole nozzle than for the conventional single-hole nozzle. These regions are well matched with the positions of high vorticity in the near upstream region of the jet flow issuing from the multiple holes of the nozzle. Consequently, the high turbulent intensities and vorticity magnitudes lead to intensified mixing between the flue gas and the reducing agent. Hence, the most suitable molar ratio between NOx and the reducing agent for the catalytic reaction can be easily obtained within a shorter physical mixing length as a result of the enhanced scalar mixing. Finally, the numerical results were applied to a trial design version of a multihole nozzle, and this nozzle was experimentally tested to confirm its mixing performance.     

Comparison of Microscopic and Macroscopic Modeling Approaches for Subsurface Contaminant Transport

The practice of contaminant transport and remediation has shown significant progress in recent years. However, despite the significant progress made, remediation efforts are often delayed by extremely long breakthrough curve tails that render efforts to bring the level of contaminants below the regulatory standards inefficient. One hypothesis is that these long tails are due to the reservoir-like slow diffusive processes in soil micropore zones. This study compares the effects of micropores at macroscopic and microscopic levels and establishes a link between these approaches for validation and calibration purposes. The link between macroscopic and microscopic levels is established through comparisons and testing of the two models while incorporating appropriate scale and boundary effects. Despite the differences in conceptual approaches and simulation time, the two approaches rendered meaningful results. The link helps forecast the effects of micropore zone transport processes in the subsurface efficiently and thus allows development of numerical tools that could contribute towards more efficient remediation design.     

Effects of salinity on endogenous rhythm of the Manila clam, Ruditapes philippinarum (Bivalvia: Veneridae)

The Manila clam Ruditapes philippinarum, an intertidal bivalve, was exposed to different salinity regimes (from 31.0–31.7‰ down to 20‰, 15‰, 10‰, 5‰), and the endogenous rhythm in its oxygen consumption was studied using an automatic intermittent-flow respirometer. When exposed to salinities reduced from 31.5‰ to 20‰ and 15‰ under otherwise constant conditions, the clams recovered a clear endogenous circatidal rhythm in their oxygen-consumption rate after having dampened periods of 12 h and 48 h, respectively. At salinities less than 10‰, however, the oxygen-consumption rate was depressed greatly at the beginning of the experiment for about 36 h and then increased to a level higher than normal, but the rhythm of oxygen consumption was not recovered. The results of this study indicate that the Manila clam, a euryhaline organism, cannot maintain a normal metabolic activity at a salinity lower than 15‰. All clams were dead after exposure at a salinity of 5‰ for 7 days. Received: 28 February 2000 / Accepted: 26 August 2000     

Possible involvement of the glycocalyx in the ichthyotoxicity of Chattonella marina (Raphidophyceae): immunological approach using antiserum against cell surface structures of the flagellate

Although the ichthyotoxic mechanism of Chattonella marina is still unknown, several lines of evidence suggest that the reactive oxygen species (ROS), such as superoxide anion (O₂^-), hydrogen peroxide (H₂O₂)_, and hydroxyl radical (·OH), produced by C. marina are involved in the mortality of fish exposed to this flagellate. Recently, we found that the cell-free supernatant prepared from C. marina, which is considered to contain the glycocalyx, showed NADPH-dependent O₂^- generation. In this study, we prepared antiserum against the crude glycocalyx of C. marina. Using indirect immunofluorescence, it was confirmed that the antiserum specifically reacted with C. marina cells. In addition to C. marina, the antiserum also reacted with other raphidophycean flagellates such as Heterosigma akashiwo, Olisthodiscus luteus, and Fibrocapsa japonica, whereas no reactivity was observed against six other flagellate species tested. These results suggest that raphidophycean flagellates have common epitopes recognized by the antiserum. Interestingly, immunohistochemical analysis of paraformaldehyde-fixed gill lamellae from yellowtail exposed to C. marina revealed that the antiserum stained the surface of gill lamellae, while no such staining pattern was observed in control gill lamellae. These results suggest that the glycocalyx may be discharged when C. marina cells are inhaled into the fishes' mouths and then come into contact with the gill surface. Based on the present results, together with our previous findings, we propose that continuous accumulation of the discharged glycocalyx on the gill surface occurs during C. marina exposure, which may be responsible for the ROS-mediated severe gill tissue damage leading to fish death.     

Repellent scent-marking of flowers by a guild of foraging bumblebees (Bombus spp.)

We have found that foraging bumblebees (Bombus hortorum, B. pascuorum, B. pratorum and B.␣terrestris) not only avoid flowers of Symphytum officinale that have recently been visited by conspecifics but also those that have been recently visited by heterospecifics. We propose that the decision whether to reject or accept a flower is influenced by a chemical odour that is left on the corolla by a forager, which temporarily repels subsequent foragers. Honeybees and carpenter bees have previously been shown to use similar repellent forage-marking scents. We found that flowers were repellent to other bumblebee foragers for approximately 20 min and also that after this time nectar levels in S. officinale flowers had largely replenished. Thus bumblebees could forage more efficiently by avoiding flowers with low rewards. Flowers to which extracts of tarsal components were applied were more often rejected by wild B. terrestris workers than flowers that had head extracts applied, which in turn were more often rejected than flowers that had body extracts applied. Extracts from four Bombus species were equally repellent to foragers. The sites of production of the repellent scent and its evolutionary origins are discussed. Received: 24 November 1997 / Accepted after revision: 8 March 1998     

Serial batch leaching procedure for characterization of coal fly ash

Although many leaching methods have been used for various purposes by research groups, industries, and regulators, there is still a need for a simple but comprehensive approach to leaching coal utilization by-products and other granular materials in order to estimate potential release of heavy metals when these materials are exposed to natural fluids. A serial batch characterization method has been developed at the National Energy Technology Laboratory that can be completed in 2–3 days to serve as a screening tool. The procedure provides an estimate of cumulative metals release under varying pH conditions, and leaching the sample at increasing liquid/solid ratios can indicate the rate at which this process will occur. This method was applied to eight fly ashes, adapted to the acidic or alkaline nature of the ash. The leachates were analyzed for 30 elements. The test was run in quadruplicate, and the relative standard deviation (RSD) was used as a measure of method reproducibility. RSD values are between 0.02 and 0.70, with the majority of the RSD values less than 0.3. The serial batch leaching procedure was developed as a simple, relatively quick, yet comprehensive method of estimating the risk of heavy metal release from fly ash when it is exposed to natural fluids, such as acid rain or groundwater. Tests on a random selection of coal fly ashes have shown it to be a reasonably precise method for estimating the availability and long-term release of cations from fly ash.     

Blood lead levels of residents living around 350 abandoned metal mines in Korea

In 2007, as part of the control and prevention of environmental contamination threatening public health, the Korean Ministry of Environment planned to implement a national biomonitoring survey of three metals: lead, cadmium, and mercury in the blood of residents living near 350 abandoned metal mines known to be contaminated and as possible threats to the health of inhabitants. Thus, we investigated demographic and lifestyle variables and blood lead levels in residents living around the mines and compared them against those of control subjects. We measured the blood lead concentrations in 14,849 subjects (14,132 from nearby the 350 abandoned metal mines and 717 subjects from eight control areas). A questionnaire was provided to all subjects to determine gender, age, mining experience, period of time living in the vicinity of mines, smoking status, and personal perception of abandoned mines as a health risk. The geometric means (95% confidence intervals) of the blood lead levels of residents living around the abandoned metal mines and control areas were 3.017 (2.996-3.037 μg/dL) [female, 2.797 μg/dL (2.771-2.822 μg/dL); male, 3.330 μg/dL (3.298-3.363 μg/dL)] and 2.757 (2.677-2.837 μg/dL) [female, 2.604 μg/dL (2.506-2.700 μg/dL); male, 2.993 μg/dL (2.859-3.126 μg/dL)], respectively. Among residents of the mining areas, nonsmokers and residents who had no mining experience showed significantly lower mean blood lead levels than did smokers, past smokers, and those with mining experience. The mean blood lead concentrations of residents who expressed some concern about the abandoned mines were significantly higher than those of residents without concerns. The mean blood lead concentration of residents living around the abandoned mines was significantly higher than that of residents living in control areas as well as that of the general adult Korean population. We also confirmed that smoking is an important variable to consider, as it increases blood lead concentration.     

Arsenic accumulation in native plants of West Bengal, India: prospects for phytoremediation but concerns with the use of medicinal plants

Arsenic (As) is a widespread environmental and food chain contaminant and class I, non-threshold carcinogen. Plants accumulate As due to ionic mimicry that is of importance as a measure of phytoremediation but of concern due to the use of plants in alternative medicine. The present study investigated As accumulation in native plants including some medicinal plants, from three districts [Chinsurah (Hoogly), Porbosthali (Bardhman), and Birnagar (Nadia)] of West Bengal, India, having a history of As pollution. A site-specific response was observed for Specific Arsenic Uptake (SAU; mg kg(-1) dw) in total number of 13 (8 aquatic and 5 terrestrial) collected plants. SAU was higher in aquatic plants (5-60 mg kg(-1) dw) than in terrestrial species (4-19 mg kg(-1) dw). The level of As was lower in medicinal plants (MPs) than in non-medicinal plants, however it was still beyond the WHO permissible limit (1 mg kg(-1) dw). The concentration of other elements (Cu, Zn, Se, and Pb) was found to be within prescribed limits in medicinal plants (MP). Among the aquatic plants, Marsilea showed the highest SAU (avg. 45 mg kg(-1) dw), however, transfer factor (TF) of As was the maximum in Centella asiatica (MP, avg. 1). Among the terrestrial plants, the maximum SAU and TF were demonstrated by Alternanthera ficoidea (avg. 15) and Phyllanthus amarus (MP, avg. 1.27), respectively. In conclusion, the direct use of MP or their by products for humans should not be practiced without proper regulation. In other way, one fern species (Marsilea) and some aquatic plants (Eichhornia crassipes and Cyperus difformis) might be suitable candidates for As phytoremediation of paddy fields.     

Abundance and sources of hydrophilic and hydrophobic water-soluble organic carbon at an urban site in Korea in summer

In this study, the characteristics of total water-soluble organic carbon (WSOC) and isolated WSOC fractions were examined to gain a better understanding of the pathway of organic aerosol production. 24 h PM(2.5) samples were collected during the summer (July 28-August 28, 2009) at an urban site in Korea. A glass column filled with XAD7HP resin was used to separate the filtered extracts into hydrophilic (WSOC(HPI)) and hydrophobic (WSOC(HPO)) fractions. The origins of air mass pathways arriving at the sampling site were mostly classified into three types, those originating over the East Sea of Korea that passed over the eastern inland urban and industrial regions (type I); those from the marine (western/southwestern/southern marine) and passed over the national industrial complex regions (type II); and those from northeastern China that passed through North Korea and metropolitan areas of South Korea (type III). Measurements showed an increase in the average WSOC fraction of total OC from the type II to III air mass (53 to 64%) periods. Also, higher SO(4)(2-)/SO(x) (=SO(2) + SO(4)(2-)) was observed in the type III air mass (0.70) than those in the types I (0.49) and II (0.43). According to the average values of WSOC/OC and SO(4)(2-)/SO(x), measurements suggest that the aerosols collected during the type III air mass period were more aged or photo-chemically processed than those during the types I and II air mass periods. The relationship between the SO(4)(2-)/SO(x) and WSOC/OC (R(2) = 0.64) suggests that a significant fraction of the observed WSOC at the site could be formed by an oxidation process similar to SO(4)(2-) aerosols, probably the oxidation process using OH radicals, or in-cloud processing. The photochemical production of WSOC(HPO) was also observed to significantly contribute to the total OC.