Polybrominated diphenyl ethers (PBDEs) in leachates from selected landfill sites in South Africa

The last few decades have seen dramatic growth in the scale of production and the use of polybrominated diphenyl ethers (PBDEs) as flame retardants. Consequently, PBDEs such as BDE -28, -47, -66, -71, -75, -77, -85, -99, -100, -119, -138, -153, -154, and -183 have been detected in various environmental matrices. Generally, in South Africa, once the products containing these chemicals have outlived their usefulness, they are discarded into landfill sites. Consequently, the levels of PBDEs in leachates from landfill sites may give an indication of the general exposure and use of these compounds. The present study was aimed at determining the occurrence and concentrations of most common PBDEs in leachates from selected landfill sites. The extraction capacities of the solvents were also tested. Spiked landfill leachate samples were used for the recovery tests. Separation and determination of the PBDE congeners were carried out with a gas chromatograph equipped with Ni63 electron capture detector. The mean percentage recoveries ranged from 63% to 108% (n=3) for landfill leachate samples with petroleum ether giving the highest percentage extraction. The mean concentrations of PBDEs obtained ranged from ND to 2670pgl(-1), ND to 6638pgl(-1), ND to 7230pgl(-1), 41 to 4009pgl(-1), 90 to 9793pgl(-1) for the Garankuwa, Hatherly, Kwaggarsrand, Soshanguve and Temba landfill sites, respectively. Also BDE -28, -47, -71 and BDE-77 were detected in the leachate samples from all the landfill sites; and all the congeners were detected in two of the oldest landfill sites. The peak concentrations were recorded for BDE-47 at three sites and BDE-71 and BDE-75 at two sites. The highest concentration, 9793+/-1.5pgl(-1), was obtained for the Temba landfill site with the highest BOD value. This may suggest some influence of organics on the level of PBDEs. Considering the leaching characteristics of brominated flame retardants, there is a high possibility that with time these compounds may infiltrate into the groundwater around the sites since most of the sites are not adequately lined.     

Compatible Blends of Zein and Polyvinylpyrrolidone

Blends of zein and polyvinylpyrrolidone (PVP) were compared based on their tensile properties, thermal properties and morphology. Zein was blended with polyvinylpyrrolidone of varying molecular weights (10, 55, and 1,300 kDa) and films were cast from ethanol solutions. Films cast using the higher molecular weight polymers showed an improvement in tensile strength, up to a 24% increase, compared to control. Differential scanning calorimetry data for the blends showed single T_m and T_g values of an intermediate value between those of zein and PVP control samples. Field emission scanning electron microscopy images show no obvious inhomogeneities, and confocal fluorescence microscopy showed no decreased uniformity in the PVP/zein films compared to control. Electrospun fibers of the zein/PVP blends were also obtained. These findings suggest that zein and polyvinylpyrrolidone combine to form a compatible blend, the first such blend of zein with a synthetic polymer.     

The typology for allocations of societal risk and safety management tasks at the local governmental level – Framing the current directions in Sweden

The starting point for this article is the need to develop empirical insights about contemporary societal risk and safety management practice and executive structures. In order to facilitate insights about societal risk and safety management in a Scandinavian welfare context we use Sweden and its local governmental level (municipal) as an empirical frame in this paper. The aim for this article is to analyse how a variety of risk and safety management tasks are divided within the Swedish municipalities. The objectives are to frame the current directions for internal allocations of risk and safety issues by providing an empirically based executive typology and to contemplate the implications and future research needs that arise from that management pattern.The analysis is based on statistical analysis of information from a web-survey with chief officials (n = 1283) with responsibilities for different municipal functions and sectors. In this study the responses to one of the survey questions are used for statistical analysis. The analyzed question focused on the degree that the respondents estimated that their administrative sector or function handled a selection of risk and safety management assignments (n = 45). A factor analysis was applied to identify patterns in the dataset. The analysis resulted in an eight factor solution with a high degree of explained variance (74.3%). The results provide an elementary contribution to the understanding of the current societal risks and safety management directions.     

Valuing lives equally in a benefit-coast analysis of safety projects: A method to reconcile theory and practice

A value of statistical life (VSL) is used in cost-benefit analysis (CBA) as a monetary measure of the benefits to people from small risk reductions that arise from safety projects. Despite its widespread use in a number of countries, the concept of a VSL remains controversial, not least because it implies acceptance of the underlying ethical assumptions of CBA together with the idea that ‘social welfare’ can be measured and aggregated in some manner. In addition, to comply with theory, variable VSLs for different groups within society would be advocated. However, without fail, empirically, it is the case that those countries that employ a willingness to pay based approach to cost-benefit analysis of a safety project appraisal tend to use a single value for that accident context that is independent of the per capita income level, or indeed other personal characteristics, of the sub-group in society to which the safety improvement will actually apply. This article presents a straightforward, but theoretically justified adaptation to the calculation of a VSL which allows empirical practice by policymakers i.e. the application of a “common” VSL for any particular hazard within a given society, to be compatible with a CBA decision making approach.     

The effect of changing the fuel of the LASTFIRE test

The LASTFIRE test is intended for the evaluation of foams used in extinguishing fires of flammable and combustible liquids in storage tanks in refinery and oil related facilities. The purpose of this study is to find, experimentally, an alternative fuel to be used in the LASTFIRE test, as a replacement for the heptane fuel, which is normally used in this test. Beside heptane, three other fuels are tested in the current study: diesel, jet A1 and kerosene. The study involved performing the LASTFIRE test, using each of the fuels and then comparing the results. The same foam is used as an extinguishing agent for all the tests and for each fuel, tests are conducted three times with separate foam discharging nozzles: semi-aspirated, aspirated and system. Using a commonly used scoring system, the results of the four fuels are evaluated. Any replaceable fuel should obtain the similar score as that is obtained by heptane. The study shows that none of the three alternatives has been judged to be suitable to replace heptane, in the LASTFIRE test.     

Mathematical Modeling of Column and Field Dense Nonaqueous Phase Liquid Tracer Tests

Mathematical models for the simulation of dense nonaqueous phase liquid tracer tests (DTTs) in laboratory columns and in the field are developed and examined. The DTT technique is a means of estimating the quantity of dense nonaqueous phase liquid (DNAPL) in a domain of interest in an aquifer. The two-dimensional field DTT model uses the Method of Principal Directions and an asymmetrical upwind algorithm for describing advective transport. Both models include diffusion transport of tracer into and from low-permeability porous structures such as clay lenses, as well as the mass transport kinetics of partitioning tracer to and from the DNAPL droplets. The dependence of the effluent tracer concentration curves on the parameters of the models is explored, and conclusions are drawn regarding the applicability of, and several possible problems with, the DTT technique. Model results indicate that the DTT performs well at locating distributed droplets of DNAPL, but is unlikely to be useful in the assessment of pooled DNAPL.     

Restored Riparian Buffers as Tools for Ecosystem Restoration in the MAIA; Processes, Endpoints, and Measures of Success for Water, Soil, Flora, and Fauna

Riparian buffer restorations are used as management tools to produce favorable water quality impacts, moreover among the many benefits riparian buffers may provide, their application as instruments for water quality restoration rests on a relatively firm foundation of research. However, the extent to which buffers can restore riparian ecosystems; their functionality and species composition, are essentially unknown. In light of the foregoing, two broad areas of research are indicated. First, data are needed to document the relative effectiveness of riparian buffers that differ according to width, length, and plant species composition. These questions, of managing buffer dimension and species composition for functionality, are of central importance even when attenuation of nutrient and sediment loads alone are considered. Second, where ecosystem restoration is the goal, effects to in-stream and terrestrial riparian biota need to be considered. Relatedly, the effects of the restoration on the landscape need to be considered. Particularly, at what rate do the effects of the riparian buffer on in-stream water quality, biota, and habitat diminish downstream from restored sites? Answers to these important questions are needed, for streams and watersheds of different size and for areas of differing soil type within watersheds. U.S. EPA-NRMRL has initiated as research project that will document the potential for buffers to restore riparian ecosystems; focusing on water quality effects, but also, importantly, documenting effects on biota. While substantial riparian buffer management initiatives are already underway, the extent of landscapes that influence riparian ecosystems in the eastern United States is large; leaving ample opportunity for this suggested research to provide improved buffer designs in the future. The ultimate goal of research projects developed under this paradigm of ecosystem restoration is to develop data that are needed to implement riparian buffer restorations in the mid-Atlantic and elsewhere, especially the eastern United States.     

Air quality and deposition of trace elements in Didouche Mourad, Algeria

Total suspended particulate matter and deposition fluxes of particles were investigated in the town of Didouche Mourad which is located 13 km north of Constantine. Samples of air particulate matter were collected at one site located in the heart of the town and situated 3 km north of a cement plant. Samples were collected from 2 November 2002 to 28 April 2003 every 3 days using a high volume air sampler. Sampling intervals were 24 h in all cases. During the same period, samples of dust fallout were collected at the same site. Samples were collected at 30-day intervals. Lead, chromium, manganese, nickel, copper, cobalt and cadmium deposition fluxes were measured and both the soluble and insoluble fractions were determined. Furthermore, the information gathered by this study was correlated with the corresponding hourly weather data provided by a weather station installed at the study station. The possible sources for dust and trace metals were analyzed by comparing average contributions of wind aspects to the concentrations and depositions of mass and chemical species with the average frequencies of wind direction. The mean concentration was 300 μg/m³. The average dust deposition rate through the period of study was 221 mg/(m².day). Results indicate that anthropogenic sources contribute greatly to trace elements. An exposure assessment to the heavy metals taking into account the inhalation route and soil dust ingestion was carried out and allowed direct comparison of trace metal intakes via these routes.     

Responses of Physical, Chemical, and Biological Indicators of Water Quality to a Gradient of Agricultural Land Use in the Yakima River Basin, Washington

The condition of 25 stream sites in the Yakima River Basin, Washington, were assessed by the U.S. Geological Survey's National Water-Quality Assessment Program. Multimetric condition indices were developed and used to rank sites on the basis of physical, chemical, and biological characteristics. These indices showed that sites in the Cascades and Eastern Cascades ecoregions were largely unimpaired. In contrast, all but two sites in the Columbia Basin ecoregion were impaired, some severely. Agriculture (nutrients and pesticides) was the primary factor associated with impairment and all impaired sites were characterized by multiple indicators of impairment. All indices of biological condition (fish, invertebrates, and algae) declined as agricultural intensity increased. The response exhibited by invertebrates and algae suggested a threshold response with conditions declining precipitously at relatively low levels of agricultural intensity and little response at moderate to high levels of agricultural intensity. This pattern of response suggests that the success of mitigation will vary depending upon where on the response curve the mitigation is undertaken. Because the form of the community condition response is critical to effective water-quality management, the National Water-Quality Assessment Program is conducting studies to examine the response of biota to gradients of land-use intensity and the relevance of these responses to water-quality management. These land-use gradient pilot studies will be conducted in several urban areas starting in 1999.     

Using Multi-Scale Sampling and Spatial Cross-Correlation to Investigate Patterns of Plant Species Richness

Land managers need better techniques to assess exoticplant invasions. We used the cross-correlationstatistic, I _YZ, to test for the presence ofspatial cross-correlation between pair-wisecombinations of soil characteristics, topographicvariables, plant species richness, and cover ofvascular plants in a 754 ha study site in RockyMountain National Park, Colorado, U.S.A. Using 25 largeplots (1000 m²) in five vegetation types, 8 of 12variables showed significant spatial cross-correlationwith at least one other variable, while 6 of 12variables showed significant spatial auto-correlation. Elevation and slope showed significant spatialcross-correlation with all variables except percentcover of native and exotic species. Percent cover ofnative species had significant spatialcross-correlations with soil variables, but not withexotic species. This was probably because of thepatchy distributions of vegetation types in the studyarea. At a finer resolution, using data from ten1 m² subplots within each of the 1000 m² plots, allvariables showed significant spatial auto- andcross-correlation. Large-plot sampling was moreaffected by topographic factors than speciesdistribution patterns, while with finer resolutionsampling, the opposite was true. However, thestatistically and biologically significant spatialcorrelation of native and exotic species could only bedetected with finer resolution sampling. We foundexotic plant species invading areas with high nativeplant richness and cover, and in fertile soils high innitrogen, silt, and clay. Spatial auto- andcross-correlation statistics, along with theintegration of remotely sensed data and geographicinformation systems, are powerful new tools forevaluating the patterns and distribution of native andexotic plant species in relation to landscape structure.