Biosolid-borne tetracyclines and sulfonamides in plants

Tetracyclines and sulfonamides used in human and animal medicine are released to terrestrial ecosystems from wastewater treatment plants or by direct manure application. The interactions between plants and these antibiotics are numerous and complex, including uptake and accumulation, phytometabolism, toxicity responses, and degradation in the rhizosphere. Uptake and accumulation of antibiotics have been studied in plants such as wheat, maize, potato, vegetables, and ornamentals. Once accumulated in plant tissue, organic contaminants can be metabolized through a sequential process of transformation, conjugation through glycosylation and glutathione pathways, and ultimately sequestration into plant tissue. While studies have yet to fully elucidate the phytometabolism of tetracyclines and sulfonamides, an in-depth review of plant and mammalian studies suggest multiple potential transformation and conjugation pathways for tetracyclines and sulfonamides. The presence of contaminants in the vicinity or within the plants can elicit stress responses and defense mechanisms that can help tolerate the negative effects of contaminants. Antibiotics can change microbial communities and enzyme activity in the rhizosphere, potentially inducing microbial antibiotic resistance. On the other hand, the interaction of microbes and root exudates on pharmaceuticals in the rhizosphere can result in degradation of the parent molecule to less toxic compounds. To fully characterize the environmental impacts of increased antibiotic use in human medicine and animal production, further research is essential to understand the effects of different antibiotics on plant physiology and productivity, uptake, translocation, and phytometabolism of antibiotics, and the role of antibiotics in the rhizosphere.     

Data requirements of GREAT-ER: Modelling and validation using LAS in four UK catchments

Higher-tier environmental risk assessments on “down-the-drain” chemicals in river networks can be conducted using models such as GREAT-ER (Geography-referenced Regional Exposure Assessment Tool for European Rivers). It is important these models are evaluated and their sensitivities to input variables understood. This study had two primary objectives: evaluate GREAT-ER model performance, comparing simulated modelled predictions for LAS (linear alkylbenzene sulphonate) with measured concentrations, for four rivers in the UK, and investigate model sensitivity to input variables. We demonstrate that the GREAT-ER model is very sensitive to variability in river discharges. However it is insensitive to the form of distributions used to describe chemical usage and removal rate in sewage treatment plants (STPs). It is concluded that more effort should be directed towards improving empirical estimates of effluent load and reducing uncertainty associated with usage and removal rates in STPs. Simulations could be improved by incorporating the effect of river depth on dissipation rates.     

Evaluation of Monte Carlo-based calibrations of HPGe detectors for in situ gamma-ray spectrometry

The aim of this work was to evaluate the use of Monte Carlo-based calibrations for in situ gamma-ray spectrometry. We have performed in situ measurements at five different sites in Sweden using HPGe detectors to determine ground deposition activity levels of ¹³⁷Cs from the 1986 Chernobyl accident. Monte Carlo-calculated efficiency calibration factors were compared with corresponding values calculated using a more traditional semi-empirical method. In addition, results for the activity ground deposition were also compared with activity densities found in soil samples. In order to facilitate meaningful comparisons between the different types of results, the combined standard uncertainty of in situ measurements was assessed for both calibration methods. Good agreement, both between the two calibration methods, and between in situ measurements and soil samples, was found at all five sites. Uncertainties in in situ measurements for the given measurement conditions, about 20 years after the fallout occurred, were found to be in the range 15–20% (with a coverage factor k = 1, i.e. with a confidence interval of about 68%).     

Agriculture as Provider of Both Food and Fuel

A database of global agricultural primary production has been constructed and used to estimate its energy content. The portion of crops available for food and biofuel after postharvest losses was evaluated. The basic conditions for agriculture and plant growth were studied, to ensure sustainable scenarios regarding use of residues. The available energy contents for the world and EU27 was found to be 7,200–9,300 and 430 TWh, respectively, to be compared with food requirements of 7,100 and 530 TWh. Clearly, very little, or nothing, remains for biofuel from agricultural primary crops. However, by using residues and bioorganic waste, it was found that biofuel production could theoretically replace one-fourth of the global consumption of fossil fuels for transport. The expansion potential for global agriculture is limited by availability of land, water, and energy. A future decrease in supply of fossil energy and ongoing land degradation will thus cause difficulties for increased biofuel production from agriculture.     

Road dust emissions from paved roads measured using different mobile systems

Very few real-world measurements of road dust suspension have been performed to date. This study compares two different techniques (referred to as Sniffer and Emma) to measure road dust emissions. The main differences between the systems are the construction of the inlet, different instruments for recording particulate matter (PM) levels, and different loads on the wheel axes (the weight of Sniffer was much higher than that of Emma). Both systems showed substantial small-scale variations of emission levels along the road, likely depending on-road surface conditions. The variations observed correlated quite well, and the discrepancies are likely a result of variations in dust load on the road surface perpendicular to the driving direction that cause variations in the measurements depending on slightly different paths driven by the two vehicles. Both systems showed a substantial influence on the emission levels depending on the type of tire used. The summer tire showed much lower suspension than the winter tires (one nonstudded and one studded). However, the relative importance of the nonstudded versus studded tire was rather different. For the ratio of studded/nonstudded, Emma shows higher values on all road sections compared with Sniffer. Both techniques showed increased emission levels with increasing vehicle speed. When the speed increased from 50 to 80 km hr(-1), the relative concentrations increased by 30-170% depending on the tire type and dust load. However, for road sections that were very dirty, Sniffer showed a much higher relative increase in the emission level with the nonstudded tire. Sniffer's absolute concentrations were mostly higher than Emma's. Possible reasons for the differences are discussed in the paper. Both systems can be used for studying relative road dust emissions and for designing air quality management strategies.     

An epidemiologic comparison of injuries presenting to a pediatric emergency department and local urgent care facilities

Problem

The objective of this study was to compare the epidemiology of injuries presenting to emergency department (ED) and urgent care (UC) facilities of a single, NEISS-affiliated hospital.

Method

Patient medical records (n = 36,811) were used to compare injury incidence, injury characteristics, and demographic characteristics between the ED, on-site UC, and off-site UC during 2006.

Results

ED presentations were more likely to be open wounds and motor vehicle-related compared to on-site UC presentations. ED presentations were more likely to be system wide/late effects, be made by an African American, or be paid through Medicaid compared to off-site UC presentations. On-site UC presentations were more likely to be made by an African American or be paid through Medicaid compared to off-site UC presentations.

Discussion

ED and UC injury characteristics and patient demographics differ. With no nationally-representative UC injury surveillance, current research likely underestimates injury incidence and presents skewed profiles. Impact on Industry: This article adds insight into the generalizability of ED-based injury surveillance to UC injuries.     

Association of Streptomyces community composition determined by PCR-denaturing gradient gel electrophoresis with indoor mold status

Both Streptomyces species and mold species have previously been isolated from moisture-damaged building materials; however, an association between these two groups of microorganisms in indoor environments is not clear. In this study, we used a culture-independent method, PCR-denaturing gradient gel electrophoresis (PCR-DGGE), to investigate the composition of the Streptomyces community in house dust. Twenty-three dust samples each from two sets of homes categorized as high-mold and low-mold based on mold-specific quantitative PCR analysis were used in the study. Taxonomic identification of prominent bands was performed by cloning and sequencing. Associations between DGGE amplicon band intensities and home mold status were assessed using univariate analyses as well as multivariate recursive partitioning (decision trees) to test the predictive value of combinations of bands intensities. In the final classification tree, a combination of two bands was significantly associated with mold status of the home (p?=?0.001). The sequence corresponding to one of the bands in the final decision tree matched a group of Streptomyces species that included Streptomyces coelicolor and Streptomyces sampsonii, both of which have been isolated from moisture-damaged buildings previously. The closest match for the majority of sequences corresponding to a second band consisted of a group of Streptomyces species that included Streptomyces hygroscopicus, an important producer of antibiotics and immunosuppressors. Taken together, the study showed that DGGE can be a useful tool for identifying bacterial species that may be more prevalent in mold-damaged buildings.     

In the eye of the stakeholder: The challenges of governing social forest values

This study examines which kinds of social benefits derived from forests are emphasised by Swedish stakeholders and what governance modes and management tools they accept. Our study shows that there exists a great variety among stakeholders’ perceptions of forests’ social values, where tourism and recreation is the most common reference. There are also differences in preferred governance modes and management where biomass and bioenergy sectors advocate business as usual (i.e. framework regulations and voluntarism) and other stakeholders demand rigid tools (i.e. coercion and targeting) and improved landscape planning. This divide will have implications for future policy orientations and require deliberative policy processes and improved dialogue among stakeholders and authorities. We suggest that there is a potential for these improvements, since actors from almost all stakeholder groups support local influence on governance and management, acknowledged and maintained either by the authorities, i.e. targeting, or by the stakeholders themselves, i.e. voluntarism.     

Filter materials for metal removal from mine drainage—a review

A large number of filter materials, organic and inorganic, for removal of heavy metals in mine drainage have been reviewed. Bark, chitin, chitosan, commercial ion exchangers, dairy manure compost, lignite, peat, rice husks, vegetal compost, and yeast are examples of organic materials, while bio-carbons, calcareous shale, dolomite, fly ash, limestone, olivine, steel slag materials and zeolites are examples of inorganic materials. The majority of these filter materials have been investigated in laboratory studies, based on various experimental set-ups (batch and/or column tests) and different conditions. A few materials, for instance steel slag materials, have also been subjects to field investigations under real-life conditions. The results from these investigations show that steel slag materials have the potential to remove heavy metals under different conditions. Ion exchange has been suggested as the major metal removal mechanisms not only for steel slag but also for lignite. Other suggested removal mechanisms have also been identified. Adsorption has been suggested important for activated carbon, precipitation for chitosan and sulphate reduction for olivine. General findings indicate that the results with regard to metal removal vary due to experimental set ups, composition of mine drainage and properties of filter materials and the discrepancies between studies renders normalisation of data difficult. However, the literature reveals that Fe, Zn, Pb, Hg and Al are removed to a large extent. Further investigations, especially under real-life conditions, are however necessary in order to find suitable filter materials for treatment of mine drainage.