Experimental investigation of performance and emissions of a VCR diesel engine fuelled with <Emphasis Type="Italic">n</Emphasis>-butanol diesel blends under varying engine parameters

The continuous rise in the cost of fossil fuels as well as in environmental pollution has attracted research in the area of clean alternative fuels for improving the performance and emissions of internal combustion (IC) engines. In the present work, n-butanol is treated as a bio-fuel and investigations have been made to evaluate the feasibility of replacing diesel with a suitable n-butanol-diesel blend. In the current research, an experimental investigation was carried out on a variable compression ratio CI engine with n-butanol-diesel blends (10–25% by volume) to determine the optimum blending ratio and optimum operating parameters of the engine for reduced emissions. The best results of performance and emissions were observed for 20% n-butanol-diesel blend (B20) at a higher compression ratio as compared to diesel while keeping the other parameters unchanged. The observed deterioration in engine performance was within tolerable limits. The reductions in smoke, nitrogen oxides (NO _x ), and carbon monoxide (CO) were observed up to 56.52, 17.19, and 30.43%, respectively, for B20 in comparison to diesel at rated power. However, carbon dioxide (CO₂) and hydrocarbons (HC) were found to be higher by 17.58 and 15.78%, respectively, for B20. It is concluded that n-butanol-diesel blend would be a potential fuel to control emissions from diesel engines.

Open image in new window

Graphical abstract ?

     

S-metolachlor pulse exposure on the alga Scenedesmus vacuolatus: effects during exposure and the subsequent recovery

In streams and creeks, the aquatic flora is exposed to fluctuating concentrations of herbicides during and following their application. Peak concentrations of herbicides, like the chloroacetanilide S-metolachlor, are usually detected following rain events. In this study, we assessed the effect of S-metolachlor pulse exposure on the algae Scenedesmus vacuolatus. We measured the time-dependency of effects during exposure on algae population and identified the algae development stage most sensitive to S-metolachlor. Furthermore, we assessed the time-to-recovery of the algae following exposure. A 6h pulse exposure at 598mugl(-1) was sufficient to inhibit cell reproduction by 50%. However, the exposure period had to coincide with the cell development stage specifically inhibited by S-metolachlor, which is the end of the cell growth phase. In algae populations composed of cells at all development stages, we initially observed an increase in the size of some algal cells, ultimately leading to an inhibition of the growth rate. In these experimental conditions, effects were observed after 18h of exposure and greatly increased with time. The recovery of algae following exposure to strongly inhibiting S-metolachlor concentrations was delayed and only occurred after 29h. These findings suggest that peak exposure to S-metolachlor may affect the growth of sensitive alga in surface waters, considering that the effects extend beyond the period of exposure.     

Effect of vegetable oil factory effluent on the gonads of a freshwater teleost, Heteropneustes fossilis (Bl.) --a biochemical study

The effects of three sublethal concentrations (5,10,15% v/v) of vegetable oil factory effluent on biochemical changes in the gonads (ovaries/testes) of a freshwater teleost were studied. The results reveal a significant decline in the total lipid, cholesterol, phospholipid, and glycerine levels, but an increase in the free fatty acid levels, both in the ovaries and the testes of H. fossilis, following 150 days (mid-January through mid-June) of exposure to 10% and 15% concentrations of the effluent. This decrease/increase in the biochemical parameters was more or less dependent on the concentration of the effluent. The functional significance of any decrease/increase in the biochemical parameter(s) has been discussed.     

A novel thermotolerant Pediococcus acidilactici B-25 strain for color, COD, and BOD reduction of distillery effluent for end use applications

The present study was aimed to characterize physico-chemical and microbial population of distillery effluent and isolate a novel thermotolerant bacterium for color, COD, and BOD reduction of spentwash. The level of alkalinity, TSS, DO, COD, BOD, TN, ammonical nitrogen, nitrate nitrogen, phosphorous, potassium, chloride, and calcium of spentwash (SW), bioreactor effluent (BE), and secondary treated effluent (STE) were well above the permissible limits. The level of color, TS, and TDS were under the permissible limits for STE but not for SW and BE. The microbial population was higher in BE. The results revealed that effluent was highly polluted and require suitable treatment before discharge. A novel thermotolerant bacterium, identified as Pediococcus acidilactici, was isolated which exhibited maximum 79 % decolorization, 85 % COD, and 94 % BOD reduction at 45 °C using 0.1 %, glucose; 0.1 %, peptone; 0.05 %, MgSO4; 0.05 %, K₂HPO₄; pH 6.0 within 24 h under static condition. The ability of this strain to decolorize melanoidin at minimum carbon and nitrogen supplementation warrants its possible application for effluent treatment at industrial level. In addition, it is first instance when melanoidin decolorization was reported by P. acidilactici. This study could be an approach towards control of environmental pollution and health hazards of people in and around the effluent distillery unit.     

Biodegradation of pretreated polyethylene film by Pseudomonas aeruginosa AMB-CD-1

A comparative study evaluated the acid, alkali, and heat-treated polyethylene biodegradation efficiency of Pseudomonas aeruginosa AMB-CD-1. The polyethylene (PE) pieces were separately treated with heat (50°C), acid (1N HCl), and alkali (1N NaOH) and then washed with water before use. All the treated samples were analyzed through thermogravimetric analysis. In addition, weight and temperature changes during the decomposition reactions were also measured and determined. In these treatments, the PE films of heat-treated and acid-treated low-density polyethylene (LDPE) indicated more significant weight loss at 120°C (48.99% and 40.75%, respectively) as compared to their control or untreated PE and alkali-treated LDPE (21.84% and 24.68%, respectively). A biodegradation assay was then conducted with treated and untreated LDPE films with P. aeruginosa AMB-CD-1 strain. Fourier transform infrared spectroscopy analysis revealed that the heat or acid-pretreated samples with isolate AMB-CD-1 displayed peaks at 2922.84, 2923.97, and 1450.31, 874.22 cm⁻¹ for C–H stretching deformation vibration, CH₂ scissoring vibration, –CHO stretching, and strong alkyl structure, respectively. Furthermore, the new peaks with a significant difference at 2500–2000 cm⁻¹ (O═C═O, O–H stretching vibration: carboxylic acid) and 1500–1000 cm⁻¹ (–CHO and C═O stretching) were noticed in the infrared spectral range of LDPE degradation. Modifications in the functional group provided evidence that biodegradation had impacted the chemical structure of the LDPE film. Additionally, it was demonstrated that pretreating LDPE films with heat or acid could speed up their biodegradation.     

A highly sensitive hexachromium monitor using water core optical fiber with UV LED

A simply structured, cheap hexachromium monitor was developed. The monitor is based on UV/VIS absorption technique. A 2-m long water core optical fiber was employed as a long path length sample cell and a UV light emitting diode (LED) was used as a light source. The emission profile of the UV LED fits very well with the absorption spectrum of chromate ions in water. Therefore, the light-dispersing element, which is usually used in an optical spectrometer, is not necessary in this monitor design. The water core fiber as a long path length makes the monitor highly sensitive for hexachromium detection. This monitor is specific for hexachromium detection without interference from tri-valence chromium ions. A detection limit of 0.1 ng Cr(VI) ml(-1) was obtained with this simple monitor.     

Impact of linear alkyl benzene sulphonate (LAS) on phosphatase activity in testis of the teleostean fish,Heteropneustes fossilis (Bloch)

Fishes are sensitive indicators of pollutants present in water.These pollutants cause various physical and physiological alterations in fishes. In the present work alteration in the activity of acid and alkaline phosphatase was evaluated in testicular tissue of fresh water fish Heteropneustes fossilis exposed to LC50 value of linear alkyl benzene sulphonate (LAS) for different exposure periods [24 h, 48 h, 72 h and 96 h] With increase in the concentration of chemical LAS, the activity of acid phosphatase (ACP) was reported elevated while a significant fall in the activity of alkaline phosphatase (ACP) was recorded for same exposure period. Elevated activity of ACP, one of the important hydrolases of lysosomes, is quite suggestive of bringing about gross necrosis and dysarchitecture. ALP is involved in various metabolic activities including gonadal maturation and as such decreased activity of this enzyme is definitely one of the important causative factors for reproductive impairment of the fish.     

Phytoremediation of cadmium-contaminated soil by Bidens pilosa L.: impact of pine needle biochar amendment

Environmental Science and Pollution Research - The objective of the present study was to evaluate the feasibility of pine needle biochar as a soil amendment to promote the growth of Bidens pilosa...