Comparative study on performances of a heat-pipe PV/T system and a heat-pipe solar water heating system

The heat-pipe solar water heating (HP-SWH) system and the heat-pipe photovoltaic/thermal (HP-PV/T) system are two practical solar systems, both of which use heat pipes to transfer heat. By selecting appropriate working fluid of the heat-pipes, these systems can be used in the cold region without being frozen. However, performances of these two solar systems are different because the HP-PV/T system can simultaneously provide electricity and heat, whereas the HP-SWH system provides heat only. In order to understand these two systems, this work presents a mathematical model for each system to study their one-day and annual performances. One-day simulation results showed that the HP-SWH system obtained more thermal energy and total energy than the HP-PV/T system while the HP-PV/T system achieved higher exergy efficiency than the HP-SWH system. Annual simulation results indicated that the HP-SWH system can heat the water to the available temperature (45°C) solely by solar energy for more than 121 days per year in typical climate regions of China, Hong Kong, Lhasa, and Beijing, while the HP-PV/T system can only work for not more than 102 days. The HP-PV/T system, however, can provide an additional electricity output of 73.019 kWh/m², 129.472 kWh/m², and 90.309 kWh/m² per unit collector area in the three regions, respectively.     

Suitable error evaluation criteria selection in the wind energy assessment via the K-means clustering algorithm

In this paper, wind energy potential of four locations in Xinjiang region is assessed. The Weibull distribution as well as the Logistic and the Lognormal distributions are applied to describe the distributions of the wind speed at different heights. In determining the parameters in the Weibull distribution, four intelligent parameter optimization approaches including the differential evolutionary, the particle swarm optimization, and two other approaches derived from these two algorithms and combined advantages of these two approaches are employed. Then the optimal distribution is chosen through the Chi-square error (CSE), the Kolmogorov–Smirnov test error (KSE), and the root mean square error (RMSE) criteria. However, it is found that the variation range of some criteria is quite large, thus these criteria are analyzed and evaluated both from the anomalous values and by the K-means clustering method. Anomaly observation results have shown that the CSE is the first one should be considered to be eliminated from the consequent optimal distribution function selection. This idea is further confirmed by the K-means clustering algorithm, by which the CSE is clustered into a different group with KSE and RMSE. Therefore, only the reserved two error evaluation criteria are utilized to evaluate the wind power potential.     

污染物负荷对曝气生物滤池处理效果的影响研究

考察了进水有机负荷和氨氮负荷对曝气生物滤池出水水质的影响.结果表明,系统COD、氨氮和TN的去除率随进水有机负荷的增加而下降,在氨氮为28.3～33.6 mg/L、TN为39.0～45.8 mg/L条件下,有机负荷小于3.53 kg/(ms3·d)时,出水COD、氨氮和TN分别小于50、5、15 mg/L,去除率分别在85%、85%和65%以上;氨氮和TN的去除率随氨氮负荷的增加而下降,在COD为287.6～313.4 mg/L、氨氮负荷小于0.56 kg/(m3·d)时,出水氨氮小于8 mg/L,去除率在85%以上,出水TN小于15mg/L,去除率在65%以上.     

Study on a new correlation between diffusion coefficient and temperature in porous building materials

The diffusion coefficient (D) and partition coefficient (K_ma) are the two important parameters used to predict the volatile organic compound (VOC) emission or sorption characteristics in porous building materials. D and K_ma may be strongly affected by temperature (T). In this study, we derived a new correlation between D and T based on the assumption that molecular diffusion is dominant, and evaluated this correlation using a series of existing experimental data. The modeling results using the new correlation agree well with the experimental data. The correlation would be useful for assessment of indoor air quality under different environmental (temperature) conditions.     

一株高效脱硫脱氨氮菌的分离、鉴定及系统发育分析

从运行稳定的能同步脱臭的曝气生物滤池中采集样品,富集分离获得一株能高效脱硫脱氨氮的菌株TS-1。对分离菌株进行形态观察、生理生化试验及16S rRNA基因序列分析,结果表明,该菌株TS-1为革兰氏阳性菌,杆状;菌落在营养琼脂培养基上呈圆形,表面光滑,乳白色半透明;V-P试验阴性,能水解淀粉和明胶,利用柠檬酸盐生长;对菌株进行16S rRNA的PCR扩增,扩增产物测序结果表明分离菌株TS-1与巨大芽孢杆菌（Bacillus megaterium）同源性达到99%;以16S rRNA同源性为基础构建了包括24株相关种属细菌在内的系统发育树,在系统发育树中,分离菌株TS1与Bacillus megaterium在同一分支。结合形态观察、生理生化试验及16S rRNA基因序列分析结果,将其初步鉴定为巨大芽孢杆菌（Bacillus megaterium）。在常温（30±2）℃、转速为150 r/min的条件下,处理pH 7、S^2-和NH⁺₄-N分别为80 mg/L和88 mg/L的水样40 h,硫化物和氨氮的脱除率分别为91.8%和96.6%。     

红萍净化水产养殖水体的研究

利用红萍(Azolla)对富营养化水产养殖水体进行净化研究。结果表明,红萍能显著增加水体中的DO,增氧幅度随流量在16.88%～70.46%之间变化,随着养殖水体流经的层数增多或者处理的时间延长,红萍对水体的增氧量加大,水中DO最终趋向一个常数值K;同时,红萍对水体中的NH₃-N和TP都有明显的去除效果,NH₃-N去除率随流量在9.86%～38.90%间波动,TP的去除率则随流量的变化在5.80%～38.43%之间波动。可见,红萍是净化水质的良好材料,能有效改善水产养殖水环境。利用红萍净化水体将为解决高密度集约化水产养殖的瓶颈提供新途径,实现水产养殖用水的封闭循环利用。     

三氯生在碳纳米管上的吸附

药品和个人护理用品(PPCPs)已成为一个引起广泛关注的新的环境问题。采用碳纳米管（CNTs）对水溶液中的三氯生进行吸附处理,考察了碳纳米管粒径及用量、温度、pH、振荡时间等因素对三氯生去除率的影响。研究结果表明,碳纳米管能快速吸附水中的三氯生,粒径较小的碳纳米管可获得较高的三氯生去除率;低温有利于吸附反应的进行;pH在6.5～7.0时,三氯生的去除率可达97%。三氯生在碳纳米管上的吸附可以很好地用Langmuir和Freundlich吸附等温方程进行描述。     

壳聚糖复合絮凝剂处理造纸废水的实验研究

研究并考察了壳聚糖复合絮凝剂对造纸污水中COD和SS的絮凝效果,结果表明,当复合絮凝剂的配方和处理条件为：聚合硫酸铁（PFS）60 mg/L聚丙烯酰胺（PAM）2 mg/L壳聚糖（CTS）0.4 mg/L,pH为7.5时,其絮凝效果最佳,此时它对水中COD与SS的去除率分别达到57.4%和97.6%, 与传统絮凝剂PAC/PAM相比,COD与SS的去除率分别提高了10.1%和5.2%,药剂成本下降了21.1%,具有明显的经济效益与环境效益。     

基于数据包络分析（DEA）的中国节能降耗实证研究

能源是人类赖以生存的基础,也是社会经济可持续发展的重要约束,能源效率越来越受到国际社会的关注.我国"十一五"规划纲要中明确提出了到2010年实现GDP能耗降低20%的量化指标,节能降耗已经上升为基本国策.通过对2000-2007年中国能源利用状况的分析以及各省能源效率的测算,得出中国能源消费结构不合理、能源效率区域差异较大的结论.     

干湿法氟化铝在铝电解生产中对污染物产生的对比分析

氟化铝是铝电解生产的主要原料之一,它的品质好坏直接影响着生产过程中污染物氟化氢的产生量。文章通过分析干、湿法氟化铝在铝电解生产使用中分别对氟化氢产生量的影响,建议推广干法氟化铝在铝电解生产中的应用,从而实现经济效益和环境效益双赢的目标。