养生旅游度假区自然养生环境的景观设计研究

随着旅游经济朝着深度化的方向发展,休闲养生的度假形式逐渐取代传统单一的观光旅游,养生旅游已成为人们关注的旅游新热点,对养生旅游度假区自然养生环境景观设计中应遵循生态自然、以人为本和养生空间情景化的设计理念,使人与自然相融合提供休闲放松的生活环境;自然养生环境中地形设计可以让人们体会不同地形给人带来的直接感受,实现不同人与自然和谐共处的养生环境;从水景设计、园路广场设计和文化景观设计三种不同角度对自然养生环境的水景观进行设计,使人们在养生度假区中感受到活力四射的水景观氛围。     

Polar organic tracers in PM2.5 aerosols from an inland background area in Southwest China: Correlations between secondary organic aerosol tracers and source apportionment

PM_(2.5) aerosol samples were collected over 12 hr and 24 hr intervals in an inland background area, Gongga Mountain National Nature Reserve(hereafter shortened to Gongga), during the summer of 2011. Polar organic tracers, inorganic ions and meteorological data were measured. The purpose of this work was to investigate the variation patterns, formation and sources of the secondary organic aerosol tracers in the studied atmosphere. The average concentrations of isoprene oxidation products, α-pinene oxidation products, β-caryophyllinic acid, sugars, sugar alcohols and anhydrosugars were 88.6 ± 106.1, 3.6 ± 5.7,0.13 ± 0.30, 13.6 ± 13.1, 31.9 ± 31.4 and 14.8 ± 10.7 ng/m3 respectively in all aerosol samples.The aged α-pinene second organic aerosol(SOA) tracers(i.e., 3-hydroxyglutraric acid(3 HGA), 3-hydroxy-2,2-dimethylglutaric acid(HDMGA), 3-acetylpentandioic acid(APDA) and 3-methyl-1,2,3-butanetricarboxylic acid(MBTCA)) correlated significantly with each other in the 24 hr PM2.5 aerosol samples, indicating that OH· is the major factor controlling the formation of these α-pinene SOA tracers. Using the positive matrix factorization(PMF) model and the tracer-based source apportionment method, we calculated that isoprene oxidation products, α-pinene oxidation products, sesquiterpene oxidation products, biomass burning, fungi spores and anthropogenic SOA accounted for 21.9% ± 5.5%, 8.4% ± 2.1%, 3.0% ± 0.7%, 5.2% ± 5.3%, 5.0% ± 6.2% and 31.4% ± 7.8% of organic carbon respectively during the sampling period.     

A case study of development and application of a streamlined control and response modeling system for PM2.5 attainment assessment in China

This article describes the development and application of a streamlined air control and response modeling system with a novel response surface modeling-linear coupled fitting method and a new module to provide streamlined model data for PM_(2.5) attainment assessment in China.This method is capable of significantly reducing the dimensions required to establish a response surface model,as well as capturing more realistic response of PM_(2.5) to emission changes with a limited number of model simulations.The newly developed module establishes a data link between the system and the Software for Model Attainment Test—Community Edition(SMAT-CE),and has the ability to rapidly provide model responses to emission control scenarios for SMAT-CE using a simple interface.The performance of this streamlined system is demonstrated through a case study of the Yangtze River Delta(YRD) in China.Our results show that this system is capable of reproducing the Community Multi-Scale Air Quality(CMAQ) model simulation results with maximum mean normalized error 3.5%.It is also demonstrated that primary emissions make a major contribution to ambient levels of PM_(2.5) in January and August(e.g.,more than50%contributed by primary emissions in Shanghai),and Shanghai needs to have regional emission control both locally and in its neighboring provinces to meet China's annual PM_(2.5)National Ambient Air Quality Standard.The streamlined system provides a real-time control/response assessment to identify the contributions of major emission sources to ambient PM_(2.5)(and potentially O_3 as well) and streamline air quality data for SMAT-CE to perform attainment assessments.     

A preliminary analysis of the surface chemistry of atmospheric aerosol particles in a typical urban area of Beijing

Atmospheric aerosol particle samples were collected using an Ambient Eight Stage(Non-Viable) Cascade Impactor Sampler in a typical urban area of Beijing from 27 th Sep.to 5th Oct.,2009.The surface chemistry of these aerosol particles was analyzed using Static Time of Flight-Secondary Ion Mass Spectrometry(Static TOF-SIMS).The factors influencing surface compositions were evaluated in conjunction with the air pollution levels,meteorological factors,and air mass transport for the sampling period.The results show that a variety of organic ion groups and inorganic ions/ion groups were accumulated on the surfaces of aerosol particles in urban areas of Beijing;and hydrophobic organic compounds with short-or middle-chain alkyl as well as hydrophilic secondary inorganic compounds were observed.All these compounds have the potential to affect the atmospheric behavior of urban aerosol particles.PM1.1–2.1and PM3.3–4.7had similar elements on their surfaces,but some molecules and ionic groups demonstrated differences in Time of Flight-Secondary Ion Mass Spectrometry spectra.This suggests that the quantities of elements varied between PM1.1–2.1and PM3.3–4.7.In particular,more intense research efforts into fluoride pollution are required,because the fluorides on aerosol surfaces have the potential to harm human health.The levels of air pollution had the most significant influence on the surface compositions of aerosol particles in our study.Hence,heavier air pollution was associated with more complex surface compositions on aerosol particles.In addition,wind,rainfall,and air masses from the south also greatly influenced the surface compositions of these urban aerosol particles.     

粉末活性炭的Fenton氧化再生

采用Fenton氧化法对吸附处理染料废水后的饱和粉末活性炭(饱和炭)进行再生,考察了饱和炭的再生效果及其主要影响因素。实验结果表明:饱和炭的最佳再生条件为H2O2投加量6.5 mmol/g、再生p H 3.0、H2O2与Fe2+的摩尔比10、再生时间1 h;最佳条件下的再生率(再生粉末活性炭(再生炭)与新粉末活性炭对废水COD去除率的百分比)约为60%;使用最佳再生条件下得到的再生炭对废水进行吸附处理,废水的COD去除率和脱色率分别约为27%和67%。     

Application of polyacrylamide to reduce phosphorus losses from a Chinese purple soil: A laboratory and field investigation

Use of anionic polyacrylamide (PAM) to control phosphorus (P) losses from a Chinese purple soil was studied in both a laboratory soil column experiment and a field plot experiment on a steep slope (27%). Treatments in the column study were a control, and PAM mixed uniformly into the soil at rates of 0.02, 0.05, 0.08, 0.10, and 0.20%. We found that PAM had an important inhibitory effect on vertical P transport in the soil columns, with the 0.20% PAM treatment having the greatest significant reduction in leachate soluble P concentrations and losses resulting from nine leaching periods. Field experiments were conducted on 5 m wide by 21 m long natural rainfall plots, that allowed collection of both surface runoff and subsurface drainage water. Wheat was planted and grown on all plots with typical fertilizer applied. Treatments included a control, dry PAM at 3.9 kg ha^?1, dry PAM at 3.9 kg ha^?1 applied together with lime (CaCO₃ at 4.9 t ha^?1), and dry PAM at 3.9 kg ha^?1 applied together with gypsum (CaSO₄·2H₂O at 4 t ha^?1). Results from the field plot experiment in which 5 rainfall events resulted in measurable runoff and leachate showed that all PAM treatments significantly reduced runoff volume and total P losses in surface runoff compared to the control. The PAM treatments also all significantly reduced water volume leached to the tile drain. However, total P losses in the leachate water were not significantly different due to the treatments, perhaps due to the low PAM soil surface application rate and/or high experimental variability. The PAM alone treatment resulted in the greatest wheat growth as indicated by the plant growth indexes of wheat plant height, leaf length, leaf width, grain number per head, and dried grain mass. Growth indexes of the PAM with Calcium treatments were significantly lesser. These results indicate that the selection and use of soil amendments need to be carefully determined based upon the most important management goal at a particular site (runoff/nutrient loss control, enhanced plant growth, or a combination).     

农药生产建设项目环境影响评价的探讨

分析了农药生产建设项目环境影响评价中存在的诸多问题。结合实际工作经验,就农药生产建设项目中的产业政策评价、环境影响的识别、环境风险评价、清洁生产评价和环保治理措施的确定进行了探讨。     

Crowding in platform staircases of a subway station in China during rush hours

Crowding during the morning peak hours at a platform staircase in a subway station in China was studied in this paper. Passenger flow was surveyed with normal evacuation time recorded. The evacuation process was simulated with the software buildingEXODUS. Predicted results on the total evacuation time and maximum flow capacity of the selected staircase were compared with the field observations. Two parameters, the width of staircase utilized per person and the maximum upstairs walking speed used in the software were identified to be noticeably different from the field studies. Predictions agreed better with the observations after tuning these two parameters. It is concluded that the evacuation simulation software can be applied for safety design with appropriate tuning on the key parameters through field tests.