Porous FeOx/BiVO4-δS0.08：Highly efficient photocatalysts for the degradation of Methylene Blue under visible-light illumination

Porous S-doped bismuth vanadate with an olive-like morphology and its supported iron oxide （y wt.% FeOx/BiVO4-δS0.08, y = 0.06, 0.76, and 1.40） photocatalysts were fabricated using the dodecylamine-assisted alcohol-hydrothermal and incipient wetness impregnation methods, respectively. It is shown that the y wt.% FeOx/BiVO4-δS0.08 photocatalysts contained a monoclinic scheetlite BiVO4 phase with a porous olive-like morphology, a surface area of 8.8-9.2 m^2/g, and a bandgap energy of 2.38-2.42 eV. There was co-presence of surface Bi^5＋, Bi^3＋, V^5＋, V^3＋, Fe^3＋, and Fe^2＋ species in y wt.% FeOx/BiVO4-δS0.08. The 1.40 wt.% FeOx/BiVO4-δS0.08 sample performed the best for Methylene Blue degradation under visible-light illumination. The photocatalytic mechanism was also discussed. We believe that the sulfur and FeOx co-doping, higher oxygen adspecies concentration, and lower baudgap energy were responsible for the excellent visible-light-driven catalytic activity of 1.40 wt.% FeOx/BiVO4-δS0.08.     

热风炉大气污染物适用排放标准

本文从热风炉的定义、分类、特性、行业标准等方面进行分析,并从热风炉大气污染物适用的有关地方排放标准加以应证,提出热风炉大气污染物适用排放标准应按照GB13271-2001《锅炉大气污染物排放标准》执行。     

Strictly protected areas are not necessarily more effective than areas in which multiple human uses are permitted

The International Union for Conservation of Nature (IUCN) classifies protected areas into six categories, ranging from strict nature reserves to areas where multiple human uses are permitted. In the past, many researchers have questioned the effectiveness of multiple-use areas, fueling an unresolved debate regarding their conservation value. The literature so far has been inconclusive: although several studies have found that strictly protected areas are more effective, others have found the opposite, and yet others that the two types do not differ. To help resolve this debate, we reviewed the literature on protected areas and conducted our own analysis using > 19 000 terrestrial protected areas worldwide. We found that the differences between strictly protected areas and areas in which multiple human uses are permitted are often small and not statistically significant. Although the effectiveness of protected areas worldwide varies, other factors, besides their assigned IUCN category, are likely to be driving this pattern.Electronic supplementary materialThe online version of this article (10.1007/s13280-020-01426-5) contains supplementary material, which is available to authorized users.     

Comparison of retention and output of sulfur in limestone soil and yellow soil and their responses to acid deposition in a small karst catchment of Guizhou Province,Southwest China

Environmental Science and Pollution Research - Investigating the responses of retention and output of sulfur (S) is significant to understand the impact of atmospheric S deposition on the S cycling...     

Microgreen Variety Impacts Leaf Surface Persistence of a Human Norovirus Surrogate

Food and Environmental Virology - Human norovirus (HuNoV) is a pathogenic agent that is frequently associated with foodborne disease outbreaks linked to fresh produce. Within microgreen production...     

Measurement of atmospheric nanoparticles: Bridging the gap between gas-phase molecules and larger particles

Atmospheric nanoparticles are crucial components contributing to fine particulate matter(PM2.5), and therefore have significant effects on visibility, climate, and human health. Due to the unique role of atmospheric nanoparticles during the evolution process from gas-phase molecules to larger particles, a number of sophisticated experimental techniques have been developed and employed for online monitoring and characterization of the physical and chemical properties of atmospheric nanoparticles,...     

Advances in air pollution control for key industries in China during the 13th five-year plan

Industrial development is an essential foundation of the national economy, but the industry is also the largest source of air pollution, of which power plants, iron and steel, building materials, and other industries emit large amounts of pollutants. Therefore, the Chinese government has promulgated a series of stringent emission regulations, and it is against this backdrop that research into air pollution control technologies for key industrial sectors is in full swing. In particular, during the 13th Five-Year Plan, breakthroughs have been made in pollution control technology for key industrial sectors. A multi-pollutant treatment technology system of desulfurization, denitrification, and dust collection, which applies to key industries such as power plants, steel, and building materials, has been developed. High-performance materials for the treatment of different pollutants, such as denitrification catalysts and desulfurization absorbers, were developed. At the same time, multi-pollutant synergistic removal technologies for flue gas in various industries have also become a hot research topic, with important breakthroughs in the synergistic removal of NO_x, SO_x, and Hg. Due to the increasingly stringent emission standards and regulations in China, there is still a need to work on the development of multi-pollutant synergistic technologies and further research and development of synergistic abatement technologies for CO₂ to meet the requirements of ultra-low emissions in industrial sectors.     

Selection of water source for water transfer based on algal growth potential to prevent algal blooms

Water transfer is becoming a popular method for solving the problems of water quality deterioration and water level drawdown in lakes. However, the principle of choosing water sources for water transfer projects has mainly been based on the effects on water quality, which neglects the influence in the variation of phytoplankton community and the risk of algal blooms. In this study, algal growth potential (AGP) test was applied to predict changes in the phytoplankton community caused by water transfer projects. The feasibility of proposed water transfer sources (Baqing River and Jinsha River) was assessed through the changes in both water quality and phytoplankton community in Chenghai Lake, Southwest China. The results showed that the concentration of total nitrogen (TN) and total phosphorus (TP) in Chenghai Lake could be decreased to 0.52 mg/L and 0.02 mg/L respectively with the simulated water transfer source of Jinsha River. The algal cell density could be reduced by 60%, and the phytoplankton community would become relatively stable with the Jinsha River water transfer project, and the dominant species of Anabaena cylindrica evolved into Anabaenopsis arnoldii due to the species competition. However, the risk of algal blooms would be increased after the Baqing River water transfer project even with the improved water quality. Algae gained faster proliferation with the same dominant species in water transfer source. Therefore, water transfer projects should be assessed from not only the variation of water quality but also the risk of algal blooms.     

Investigation of suitable precursors for manganese oxide catalysts in ethyl acetate oxidation

The control of ethyl acetate emissions from fermentation and extraction processes in the pharmaceutical industry is of great importance to the environment. We have developed three Mn₂O₃ catalysts by using different Mn precursors (MnCl₂, Mn(CH₃COO)₂, MnSO₄), named as Mn₂O₃-Cl, -Ac, -SO₄. The tested catalytic activity results showed a sequence with Mn precursors as: Mn₂O₃-Cl > Mn₂O₃-Ac > Mn₂O₃-SO₄. The Mn₂O₃-Cl catalyst reached a complete ethyl acetate conversion at 212℃ (75℃ lower than that of Mn₂O₃-SO₄), and this high activity 100% could be maintained high at 212℃ for at least 100 hr. The characterization data about the physical properties of catalysts did not show an obvious correlation between the structure and morphology of Mn₂O₃ catalysts and catalytic performance, neither was the surface area the determining factor for catalytic activity in the ethyl acetate oxidation. Here we firstly found there is a close linear relationship between the catalytic activity and the amount of lattice oxygen species in the ethyl acetate oxidation, indicating that lattice oxygen species were essential for excellent catalytic activity. Through H₂ temperature-programmed reduction (H₂-TPR) results, we found that the lowest initial reduction temperature over the Mn₂O₃-Cl had stronger oxygen mobility, thus more oxygen species participated in the oxidation reaction, resulting in the highest catalytic performance. With convenient preparation, high efficiency, and stability, Mn₂O₃ prepared with MnCl₂ will be a promising catalyst for removing ethyl acetate in practical application.     

Response of PM2.5-bound elemental species to emission variations and associated health risk assessment during the COVID-19 pandemic in a coastal megacity

The coronavirus (COVID-19) pandemic is disrupting the world from many aspects. In this study, the impact of emission variations on PM_2.5-bound elemental species and health risks associated to inhalation exposure has been analyzed based on real-time measurements at a remote coastal site in Shanghai during the pandemic. Most trace elemental species decreased significantly and displayed almost no diel peaks during the lockdown. After the lockdown, they rebounded rapidly, of which V and Ni even exceeded the levels before the lockdown, suggesting the recovery of both inland and shipping activities. Five sources were identified based on receptor modeling. Coal combustion accounted for more than 70% of the measured elemental concentrations before and during the lockdown. Shipping emissions, fugitive/mineral dust, and waste incineration all showed elevated contributions after the lockdown. The total non-carcinogenic risk (HQ) for the target elements exceeded the risk threshold for both children and adults with chloride as the predominant species contributing to HQ. Whereas, the total carcinogenic risk (TR) for adults was above the acceptable level and much higher than that for children. Waste incineration was the largest contributor to HQ, while manufacture processing and coal combustion were the main sources of TR. Lockdown control measures were beneficial for lowering the carcinogenic risk while unexpectedly increased the non-carcinogenic risk. From the perspective of health effects, priorities of control measures should be given to waste incineration, manufacture processing, and coal combustion. A balanced way should be reached between both lowering the levels of air pollutants and their health risks.