厌氧系统中碱处理对污泥减量的影响

碱解预处理污泥和原污泥按一定比例进行混合后,投入厌氧反应器中进行消化,研究其对污泥减量化的影响。结果表明,该处理既可以提高污泥减量率,又能改善污泥厌氧消化性能,提高污泥产气量。当碱处理污泥和原污泥混合比为1∶3时,在混合初期由于稀释作用和水解中和作用,溶液的pH能迅速恢复到中性。SS减少48%,较对照组提高了10%;SCOD减少约80%,较对照组提高20%,而空白对照组因未发生溶胞作用,各参数值均处于较低水平,降解率也维持在较低水平。     

2011年中国大陆地震灾害损失述评

列出了2011年中国境内5.0级以上地震目录,总结了当年我国大陆地区各次地震灾害事件的基础数据信息和灾害信息,结合该年度我国大陆地区地震灾害事件发生所在省(自治区、直辖市)地震局的地震灾害评估资料,总结、归纳了2011年我国大陆地区地震灾害的主要数据和特性。最后,列出了1990年以来我国大陆地震灾害的相关数据,并进行了简单的比较。     

基于MODIS的渍害田和正常农田遥感特性对比研究

渍害田在我国南方地区分布广泛,严重影响农业生产。以四湖流域洪湖地区为实验区,基于渍害田的物理及生态特性来探讨渍害田遥感识别特性。利用2002～2011年MODIS产品,辅以土壤图、土地覆被数据,对比分析了正常农田及渍害田在反照率、增强型植被指数（EVI）、地表夜温、地表温差和表观热惯量的时相差异;并结合相关研究成果加以解释和验证。结果表明：一年中大部分时段,正常农田的反照率、EVI、地表温差都大于渍害田,而地表夜温、表观热惯量都低于渍害田;各指标的多年平均值也具有类似差别;渍害田的EVI在6、7月份比正常农田高, 可能是由于渍害田在雨、热、肥条件同时良好时比正常农田生长的更快。研究结果可为进一步准确识别渍害田空间分布及其动态变化     

我国台风灾害救助应急响应的时空分布特征

基于2005 - 2010年历次台风灾害救助应急响应的启动和损失情况,在统计分析响应频次和响应灾情的基础上,研究分析了国家台风灾害救助应急响应的时空分布特征.结果表明,国家台风灾害救助应急响应的时空分布特征大致反映了我国重大台风灾害损失的时空分布特征和我国台风灾害救助工作的发展变化和新思路:①2005 - 2010年,国家共针对24次台风过程启动救助应急响应51次,平均每年8.5次,其中四级、三级响应分别为41次、10次,平均每年6.8次、2.5次,分别占80％和20％.②7-9月国家启动台风应急响应最多,10月、5月和4月偶有分布.③近年重大台风损失2005 - 2006年严重,2007 - 2010年则较轻;国家针对台风灾害启动响应从东南沿海向内陆和北方沿海省份递减.④紧急转移安置人口是启动响应依据最多的指标,且呈现明显的逐年下降趋势,反映了近年来国家对台风灾害救助工作的重视和以“预防为主”的应急管理新思路.     

自然灾害社会脆弱性评估研究——以上海市为例

基于投影寻踪聚类模型(PPC),结合基于实数编码的加速遗传算法(RAGA),对上海市进行了自然灾害社会脆弱性评估的尝试。结果表明:①灾害社会脆弱性最高的为崇明县,其次为宝山区和金山区;②灾害社会脆弱性最低的是黄埔区,其次是徐汇区和静安区;③总体而言,灾害脆弱性较低的地区集中于上海城市中心区,而城市边缘区的社会脆弱性一般较高。     

海南文昌火箭发射场雷电环境分析

利用海南省18个气象台站的雷暴人工观测资料和海南闪电定位网的观测资料,分析了海南文昌火箭发射场的雷暴特征和雷电环境,结果表明:海南岛的中部和北部雷暴活动较强,西部、东部和南部近海地区的雷暴活动较弱,文昌发射场处在北部较强的雷暴区;采用Krigine(克里格)方法拟合的结果为文昌火箭发射场雷暴日数的年变化从1982年以后逐渐减少,发射场一年中各月都有雷暴发生,4-10月为雷暴高发期;发射场西部、西北部和北部区域雷暴活动较其它区域要强,79%的雷电流强度小于40 kA,而只有5.9%的雷电流强度大于60 kA,一天中闪电的发生有两个高峰时段,一个出现在凌晨5时到6时,另一个时段出现在14时到18时,午后15时左右是闪电活动最频繁的时段。     

基于高性能GPU计算的城市建筑群震害模拟

为适应不断提高的震害预测需求,精细化模型已经成为城市区域震害预测的主要发展方向。然而传统的基于CPU平台的计算方法成本过高,使得精细化模型的应用受限。近年来,GPU技术由于其强大的并行计算能力和较为低廉的价格优势,在通用计算领域得到了快速的发展和应用。基于GPU-CPU协同计算技术,建立了城市区域震害的计算模拟方法,显著缩短了城市区域震害预测的时间。并采用该方法对某中型城市的真实震害进行了模拟应用,展示了GPU技术在大区域城市建筑群震害模拟中的独特优势。     

Estimating Maximum Concentrations for Open Path Monitoring Along a Fixed Beam Path

ABSTRACT

Researchers have applied open path optical sensing techniques to a variety of workplace and environmental monitoring problems. Usually these data are reported in terms of a path-average (or path-integrated) concentration. When assessing potential human exposures along a beam path, this path-average value is not always informative, since concentrations along the path can vary substantially from the beam average. The focus of this research is to arrive at a method for estimating the upper-bound in contaminant concentrations over a fixed open beam path. The approach taken here uses a statistical model to estimate an upper-bound concentration based on a combination of the path-average and a measure of the spatial variability computed from point samples along the beam path. Results of computer simulations and experimental testing in a controlled ventilation chamber indicate that the model produced conservative estimates for the maximum concentration along the beam path. This approach may have many applications for open path monitoring in workplaces or wherever maximum concentrations are a concern.     

A sensitive monoclonal antibody-based enzyme-linked immunosorbent assay for chlorpyrifos residue determination in Chinese agricultural samples

A monoclonal antibody-based competitive antibody-coated enzyme-linked immunosorbent assay (ELISA) was developed and optimized for determining chlorpyrifos residue in agricultural products. The IC(50) and IC(10) of this ELISA were 3.3 ng/mL and 0.1 ng/mL respectively. The average recoveries in six agricultural products were between 79.5% and 118.0%, with the intra-assay coefficient of variation being less than 8 %. The limit of detection for all tested products was 30 ng/g. To the best of our knowledge, this assay has the best specificity among all the published research on ELISAs for chlorpyrifos.     

Hexachlorocyclohexane (HCH) as new Stockholm Convention POPs��a global perspective on the management of Lindane and its waste isomers

Purpose

Hexachlorocyclohexane (HCH) isomers (??-, ??- and ??- (Lindane)) were recently included as new persistent organic pollutants (POPs) in the Stockholm Convention, and therefore, the legacy of HCH and Lindane production became a contemporary topic of global relevance. This article wants to briefly summarise the outcomes of the Stockholm Convention process and make an estimation of the amount of HCH waste generated and dumped in the former Lindane/HCH-producing countries.

Results

In a preliminary assessment, the countries and the respective amount of HCH residues stored and deposited from Lindane production are estimated. Between 4 and 7 million tonnes of wastes of toxic, persistent and bioaccumulative residues (largely consisting of alpha- (approx. 80%) and beta-HCH) are estimated to have been produced and discarded around the globe during 60 years of Lindane production. For approximately 1.9 million tonnes, information is available regarding deposition. Countries are: Austria, Brazil, China, Czech Republic, France, Germany, Hungary, India, Italy, Japan, Macedonia, Nigeria, Poland, Romania, Slovakia, South Africa, Spain, Switzerland, Turkey, The Netherlands, UK, USA, and former USSR. The paper highlights the environmental relevance of deposited HCH wastes and the related POPs?? contaminated sites and provides suggestions for further steps to address the challenge of the legacy of HCH/Lindane production.

Conclusion

It can be expected that most locations where HCH waste was discarded/stockpiled are not secured and that critical environmental impacts are resulting from leaching and volatilisation. As parties to the Stockholm Convention are legally required to take action to stop further POPs pollution, identification and evaluation of such sites are necessary.