基于时空同步监视的三维海洋灾害预警辅助分析系统

为了直观地展示海洋灾害致灾因子信息和辅助海洋灾害预警分析,应用SKYLINE三维地理信息技术构建界面布局和人机交互界面,基于时空同步监视的理念和数据综合管理的思维采用数据同步技术将台风信息与渔场、渔船、海浪、潮位、增水数据等在同一界面进行综合集成和实时叠加展示分析,建立了人机交互式三维海洋灾害预警辅助分析系统。系统具有信息查询、致灾因子同步监视分析、实时预报信息叠加分析、渔船安全管理辅助等功能,实现了对海洋海浪和风暴潮预警具有较好的辅助分析。实际应用表明,系统能够直观展示致灾要素,为防御海洋灾害提供了一个形象的会商协同平台,有助于提高海洋灾害预警分析能力。     

Removal of organic matter and disinfection by-products precursors in a hybrid process combining ozonation with ceramic membrane ultrafiltration

The performance of an integrated process including coagulation, ozonation, ceramic ultrafiltration (UF) and biologic activated carbon (BAC) filtration was investigated for the removal of organic matter and disinfection by-products (DBPs) precursors from micro-polluted surface water. A pilot scale plant with the capacity of 120 m³ per day was set up and operated for the treatment of drinking water. Ceramic membranes were used with the filtration area of 50 m² and a pore size of 60 nm. Dissolved organic matter was divided into five fractions including hydrophobic acid (HoA), base (HoB) and neutral (HoN), weakly hydrophobic acid (WHoA) and hydrophilic matter (HiM) by DAX-8 and XAD-4 resins. The experiment results showed that the removal of organic matter was significantly improved with ozonation in advance. In sum, the integrated process removed 73% of dissolved organic carbon (DOC), 87% of UV₂₅₄, 77% of trihalomethane (THMs) precursors, 76% of haloacetic acid (HAAs) precursors, 83%of trichloracetic aldehyde (CH) precursor, 77% of dichloroacetonitrile (DCAN) precursor, 51% of trichloroacetonitrile (TCAN) precursor, 96% of 1,1,1-trichloroacetone (TCP) precursor and 63% of trichloronitromethane (TCNM) precursor. Hydrophobic organic matter was converted into hydrophilic organic matter during ozonation/UF, while the organic matter with molecular weight of 1000–3000 Da was remarkably decreased and converted into lower molecular weight organic matter ranged from 200–500 Da. DOC had a close linear relationship with the formation potential of DBPs.     

下向进路回采钢筋混凝土假顶稳定性分析

〗为确保下向进路采场高效安全回采,采用ABAQUS的损伤塑性模型对下向进路钢筋混凝土假顶进行稳定性分析,得到假顶的应力与位移分布规律,分别从假顶的应力分布、变形量对不同进路尺寸及假顶厚度的影响进行比较分析。结果表明,进路假顶产生的最大拉应力（089MPa）小于混凝土层的抗拉强度（127MPa）;最大压应力（416 MPa）小于混凝土层的抗压强度（119MPa）;假顶底部最易被拉裂位置为偏离假顶中央(05~1)m处;钢筋承载了大部分拉应力,受拉性能得到充分利用。在进路尺寸为3m×3m或者4m×3m时假顶厚度取06m,进路尺寸为4m×4m时假顶厚度取08m,假顶最大拉应力值均未超过混凝土的抗拉强度值,此时假顶较为稳定,便于进路维护与提高回采强度。研究结果对下向进路采场的安全生产提供技术保障。     

基于生态服务价值的多目标水源地土地利用结构优化

为探讨首都水源地最佳水土资源优化配置模式,选取北京山区怀柔水库流域为研究对象,基于研究区5期(1990、1995、2000、2005 和2008)卫星遥感影像数据,分析了怀柔水库流域1990~2008年间土地利用时空变化特征,并基于生态服务价值理论、灰参数线性规划理论和CLUE-S模型对怀柔水库流域土地利用进行空间优化配置模式研究.结果表明:现有土地利用结构在优化配置后流域生态系统服务功能价值较2008年增加1795.4万元,增幅5.4%.其中,流域涵养水源功能价值量增加最多,为560.9万元,净化大气的价值增长幅度最大,增长率达到9.3%.研究结果可为该区域水土地资源的可持续利用、开发和管理提供科学依据.     

基于ISM的区域综合减灾能力评价指标体系研究

分析了区域综合减灾能力的内涵,总结了国内外专家学者对各类减灾能力评价指标的研究进展,结合我国综合减灾工作实际情况,提出了评价区域综合减灾能力的5个一级指标,运用解释结构模型(ISM)定量论证了各指标体系之间的耦合性,证明了一级指标体系的科学性、全面性和综合性。通过对一级指标的细化提出了12个二级指标,考虑评价指标理论完整性的角度,提出了42个三级指标。在此基础上,考虑数据的可获取性,进一步凝练简化为20个三级指标,形成了适用于各类自然灾害、综合考虑灾害发展各个阶段、反映一个区域整体综合减灾能力的区域综合减灾能力评价指标体系。为评价区域综合减灾能力和综合减灾工作成效奠定了基础。     

The feasibility of concentrated rural settlement in a context of post‐disaster reconstruction: a study of China

There is growing appreciation of the use of concentrated rural settlement as an effective means of implementing infrastructure projects and helping to achieve sustainable development in rural areas. This occurs in China through the exchange of rural residential land for urban construction. However, this policy has not been effective under normal circumstances (called development‐driven conditions) as frequently farmers are reluctant to accept such an exchange. By contrast, in a time of disaster, such as after the 2008 earthquake in Sichuan Province, China, rural victims have accepted this policy of rural residential land exchange. Employing game theory, this paper identifies the reasons for the different outcomes and it contends that the implementation of concentrated rural settlement practice under disaster‐induced conditions is more effective than its introduction under development‐driven conditions. The results of the analysis indicate that, in China, concentrated rural settlement is feasible in a context of post‐disaster reconstruction.     

芬顿试剂氧化对污泥脱水性能的影响

利用芬顿试剂调理污泥,以W_C(污泥滤饼含水率)和CST(毛细吸水时间)作为评价污泥脱水性能的指标,通过分析污泥中各层ρ(EPS)(EPS为胞外聚合物)和上清液中小分子有机物质量浓度来阐明污泥脱水性能的变化. 结果表明:芬顿试剂调理可促进EPS氧化分解,TB-EPS(紧密结合的胞外聚合物)破解转化为LB-EPS(松散结合的胞外聚合物)和S-EPS(上清液层胞外聚合物),大幅降低W_C和CST. 试验中当pH为4,w(H₂O₂)和 w(Fe2+)均为40 mg/g时,ρ(EPS)降低了33.04%,W_C和CST分别降至63.36%和28.7 s. Pearson相关性分析表明,ρ(TB-EPS)与W_C和CST均存在显著的正相关性(P＜0.01),是影响污泥脱水性能的重要因素,而ρ(LB-EPS)和ρ(S-EPS)与污泥脱水性能的相关性较低. 液相色谱分析表明,随着芬顿试剂投加量的增大,EPS等有机物分解程度增大,污泥上清液中小分子有机物种类明显增多,其质量浓度显著升高,ρ(甲酸)和ρ(乙酸)分别由原污泥的52.72、15.99 mg/L升至446.05、522.36 mg/L.      

我国城市生活垃圾填埋处理CH4排放关键因子

CH₄是大气中主要的温室气体之一,研究我国城市生活垃圾填埋处理CH₄排放关键因子对于准确估算CH₄排放量具有重要意义. 在综合分析我国城市生活垃圾填埋处理场在不同历史发展阶段的处理技术类型、管理方式、垃圾成分和理化特性的基础上,结合北京阿苏卫垃圾填埋场对不同深度(至填埋层下18 m)钻井提取的12组垃圾样品数据,借鉴《2006年IPCC国家温室气体清单指南》推荐的CH₄排放关键因子,确定了MCF(CH₄修正因子)、DOC(可降解有机碳质量分数,下同)、t_1/2(半衰期)和k(CH₄产生率). 结果表明:MCF在不同历史阶段表现出鲜明的时间特征,1978年前、1979—1990年、1991—2000年、2001—2005年和2006—2011年5个阶段的MCF分别为0.40、0.60、0.75、0.92和0.96;我国南、北方城市生活垃圾DOC随时间变化均呈增加趋势,1959—1990年、1991—2000年和2001—2011年3个阶段的DOC分别为9.34%、15.22%和15.05%;我国城市生活垃圾t_1/2为2.30 a,k为0.30 a-1.      

抗生素抗性基因在典型行业和市政污水中的污染特征及消减研究进展

抗生素在养殖、制药及医疗卫生行业中的广泛使用导致环境中的抗性细菌(Antibiotic resistance bacteria,ARB)及抗性基因(Antibiotic resistance genes,ARGs)浓度日益增加,甚至已经威胁到人体健康.本文在总结大量文献的基础上,阐述了ARB和ARGs在抗生素典型行业(包括养殖业、制药业和医疗卫生业)和市政污水中的污染特征,重点介绍了污水处理系统(Wastewater treatment plants,WWTPs)不同处理工艺对抗性细菌和抗性基因消长的影响及机制,最后针对污水处理系统中抗性基因的消减提出了新的见解,并对今后研究方向进行了展望.     

Comparative study on the efficiency and environmental impact of two methods of utilizing polyvinyl chloride waste based on life cycle assessments

Two processes of utilizing polyvinyl chloride （PVC） waste, an incineration process and a vacuum pyrolysis process, for energy conversion were compared to determine their efficiency and environmental perfor- mance. We carried out a life cycle assessment with each of the two processes to evaluate their environmental impact and defined the goals and limits of our remit. As well, we established an inventory of PVC waste from incineration and vacuum pyrolysis based on process analysis, data collection and calculations. The results show that electrical power output per unit mass of PVC waste in the incineration process was twice as high as that of the vacuum pyrolysis process. Incineration had a larger total environmental impact potential than vacuum pyrolysis. The total environmental impact potential of PVC waste from incineration was three times higher than that from vacuum pyrolysis. Incineration of PVC disposed 300 ng. 100 kgI of dioxins and vacuum pyrolysis 98.19 ng- 100 kgI of dioxins. As well, we analyzed the data for their uncertainty with results quantified in terms of three uncertainties： basic uncertainty, additional uncertainty, and computational uncertainty. The coefficients of variation of the data were less than 25% and the quality of the inventory data was acceptable with low uncertainty. Both PVC waste disposal processes were of similar quality and their results comparable. The results of our life cycle impact assessment （LCIA） showed considerable reliability of our methodology. Overall, the vacuum pyrolysis process has a number advantages and greater potential for development of PVC disposal than the incineration process.