Assessment of plant-driven uptake and translocation of clofibric acid by Scirpus validus

Pharmaceutical compounds are now considered as emerging contaminants of environmental concern. The overall objective of this study was to evaluate the uptake and translocation of clofibric acid (CA) by the macrophyte Scirpus validus growing hydroponically. A set of the three replicates was established for each exposure time and for each CA concentration. Plants were grown in 4 L vessels (four plants per vessel corresponding to the three exposure period studies, i.e., 7, 14, 18, and 21 days) which contained an aerated modified Hoagland nutrient solution that was spiked with CA at concentrations of 0.5, 1.0, and 2.0 mg?L^?1. At each exposure period, CA concentration was measured in the nutrient solutions. A sea sand disruption method was employed for the extraction of CA from plant tissues. The determination of the pharmaceutical concentration was carried out using solid phase extraction (SPE) followed by chromatographic analysis. The quantification of CA concentrations in both nutrient solutions (after SPE) and plant tissues (after extraction) was conducted by chromatographic analysis. CA concentrations of 5.4–26.8 μg?g^?1 (fresh weight) were detected in the roots and 7.2–34.6 μg?g^?1 (fresh weight) in the shoots after 21 days. Mass balance calculations showed that S. validus uptake alone accounted for a significant contribution (6–13 % for the roots and 22–49 % for the shoots) of the total loss of CA. The bioaccumulation factors (BAFs) based on fresh weight for the roots ranged from 6.6 to 23.2, while values for the shoots ranged from 9.5 to 32.1. All the BAFs for the shoots were greater than those in the roots, implying that CA has greater tendency to be translocated to the shoots, rather than the roots of S. validus. All the shoot-to-root concentration ratios were more than 1, denoting that the shoots of S. validus do preferentially accumulate CA. We demonstrated that CA can be actively taken up, subsequently translocated and accumulated by aboveground tissues of S. validus. Since S. validus could account for the removal of 28–62 % of the total mass loss of CA from the system, such phytoremediation technology has great potential for the removal of pharmaceuticals such as CA from inflowing waters.     

Source Apportionment of Particulate Matter (PM10) and Indoor Dust in a University Building

A study on source apportionment of indoor dust and particulate matter (PM₁₀) composition was conducted in a university building by using chemometrics. The objective of this study was to investigate the potential sources of selected heavy metals and ionic species in PM₁₀ and indoor dust. PM₁₀ samples were collected using a low-volume sampler (LVS) and indoor dust was collected using a soft brush. Inductively coupled plasma spectrometry (ICP-MS) was used to determine the concentration of heavy metals, while the concentration of cations and anions was determined by atomic absorption spectrometer (AAS) and ion chromatography (IC), respectively. The concentration of PM₁₀ recorded in the building throughout the sampling period ranged from 20 ± 10 μgm^?3 to 80 ± 33 μgm^?3. The composition of heavy metals in PM₁₀ and indoor dust were dominated by zinc (Zn), followed by lead (Pb), copper (Cu), and cadmium (Cd). Principle component analysis (PCA) and multiple linear regression (MLR) showed that the main sources of pollutants in PM₁₀ came from indoor renovations (73.83%), vehicle emissions (16.38%), earth crust sources (9.68%), and other outdoor sources (0.11%). For indoor dust, the pollutant source was mainly earth crust. This study suggests that chemometrics can be used for forensic investigation to determine the possible sources of indoor contaminants within a public building.     

SIMULATION OF THE EFFECTS OF URBANIZATION ON BASIN STREAMFLOW1

ABSTRACT: The hydrologic modeling of streamflow in the Waterford River Basin has been conducted as part of comprehensive investigations of the effects of urbanization on water resources in the basin. Using a detailed input data base, continuous simulation of streamflow in the study area has been done by means of the HSPF model, which has been calibrated for the existing conditions and then applied to several future land use scenarios. The basin climate and geology contribute to high conversion of precipitation into streamflow under the existing conditions. Consequently, future urban development in the study basin should not increase the annual streamflow, but would contribute to increases in peak flows and the incidence of flooding because of the increased speed of runoff. If the impervious area in the basin is doubled, the peak flows may increase by about 20 percent.     

Insights on the solubilization products after combined alkaline and ultrasonic pre-treatment of sewage sludge

This work provides insights on the solubilization products after a simultaneous combination of alkaline and ultrasonic (ALK + ULS) pre-treatment of sewage sludge. Soluble chemical oxygen demand (SCOD) increased from 1200 to 11,000 mg/L after such treatment. Organics with molecular weight around 5.6 kDa were solubilized because of the synergistic effect of ultrasound and alkali. Organics with molecular weight larger than 300 kDa increased from 7.8% to 60%, 16% and 42.3% after ULS, ALK and ALK + ULS treatment, respectively. Excitation emission matrix fluorescence spectroscopy analysis identified soluble microbial product-like and humic acid-like matters as the main solubilization products. Sludge anaerobic biodegradability was significantly enhanced with the simultaneous application of ALK + ULS pre-treatment. ALK + ULS pre-treatment resulted in 37.8% biodegradability increase compared to the untreated sludge. This value was higher compared to the biodegradability increase induced by individual ALK pre-treatment (5.7%) or individual ULS pre-treatment (20.7%) under the same conditions applied.     

Biocompatible Polyurethane Scaffolds Prepared from Glycerol Monostearate-Derived Polyester Polyol

Biodegradable polyester polyol was synthesized from oleochemical glycerol monostearate (GMS) and glutaric acid under a non-catalyzed and solvent-free polycondensation method. The chemical structure of GMS-derived polyester polyol (GPP) was elucidated by FTIR, ¹H and ¹³C NMR, and molecular weight of GPP was characterized by GPC. The synthesized GPP with acid value of 3.03 mg KOH/g sample, hydroxyl value of 115.72 mg KOH/g sample and M_n of 1345 g/mol was incorporated with polyethylene glycol (PEG) and polycaprolactone diol (PCL diol) to produce a water-blown porous polyurethane system via one-shot foaming method. The polyurethanes were optimized by evaluating glycerol as a crosslinker, silicone surfactant and water blowing agent on tensile properties of polyurethanes. All polyurethanes underwent structural change, and crystalline hard segments of polyurethanes were shifted to higher temperature suggested that hard segments undergone re-ordering process during enzymatic treatment. In terms of biocompatibility, polyurethane scaffold produced by reacting 100% w/w of GPP with isophorone diisocyanate and additives showed the highest cells viability of 3T3 mouse fibroblast (94%, day 1), and MG63 human osteosarcoma (107%, day 1) and better cell adhesion as compared to reference polyurethane produced by only PEG and PCL diol (3T3 cell viability: 8%; MG63 cell viability: 2%). The current work demonstrated GPP synthesized from renewable and environmental friendly resources produced polyurethanes that allows improvement in physico-chemical, mechanical and biocompatibility properties. By blending with increasing content of GPP, the water-blown porous polyurethane scaffold has shown great potential as biomaterial for soft and hard tissue engineering.     

The safety implications of vehicle seat adjustments

INTRODUCTION: The goal of this study was to gather information on the preferred front seat position of vehicle occupants and to determine the impact of variation in seat position on safety during crashes. METHOD: The study evaluated the relationship between seat position and occupant size using the chi-square test and compared the risk of severe injury for small females and large males with regard to forward and rearward seat position using logistic regression. RESULTS: While smaller drivers sat closer to the steering wheel than larger drivers, front passengers of all sizes used similar seat positions. Additionally, the risk of injury was higher for small, unbelted females in rearward seat positions and large males (belted and unbelted) in forward seat positions. CONCLUSIONS: Occupants who adjust their seats to positions that are not consistent with required federal tests are at a greater risk for severe injury in a crash.     

Challenges and needs for process safety in the new millennium

Process industries have made quite a bit of progress in process safety since the tragic night of December 2, 1984 in Bhopal. Nonetheless, incidents continue to occur on a regular basis due to insufficient understanding of the urgency to identify best practices and drive for process safety improvements in the organization. This paper addresses some of the critical challenges in implementing effective safety programs: (a) failure to learn from past incidents and to capture those lessons into process design, procedures, training, maintenance, and other programs, (b) insufficient attention to leading indicators, and (c) an increase in complexity of process operations and lack of communication. In the presence of these challenges, there is a great need to develop better solutions by utilizing good science based approaches and best practice studies. Potential research areas include, but are not limited to, incident database analysis, reactive chemicals, inherently safer design, combustible dust explosion, facility siting, and the flammability of fuel mixtures and aerosols. In addition, an example was presented on LNG industry safety to illustrate that science-based research is needed to ensure the safe operation and to avoid or mitigate unintended consequences.     

The guessing of mine safety signs meaning: effects of user factors and cognitive sign features

This study investigated the effects of user factors and cognitive sign features on the guessability of mine safety signs. Sixty na?ve participants guessed the meanings and rated the cognitive sign features of 42 Mainland Chinese mine safety signs. The results showed that some user factors were significant predictors of guessing performance, while some were not. As expected, guessability scores varied significantly with the cognitive sign features of familiarity, concreteness, simplicity, meaningfulness and semantic closeness. The findings emphasize the need to create awareness of the importance of mine safety and promote understanding of mine safety sign meanings amongst people in their work environments. To design more user-friendly mine safety signs, industrial designers should develop and evaluate signs with consideration of the significant user factors and the 5 sign features tested here.     

A bottom-up clustering approach to identify bus driving patterns and to develop bus driving cycles for Hong Kong

Bus transport has been an important mode taking up a significant share of urban travel demand and thus the corresponding impacts on the environment are of great concerns. Use of driving cycles to evaluate the environmental impacts of buses has attracted much attention in recent years worldwide. The franchised bus service is currently playing important roles in the public transport system in Hong Kong; however, there is no driving cycle developed specifically for them. A set of bus driving cycle was therefore developed using a bottom-up approach where driving data on the bus network with mixed characteristics were collected. Using the Ward’s method for clustering, the collected data were then categorized into three clusters representing distinct franchised bus route patterns in Hong Kong. Driving cycles were then developed for each route pattern including (i) congested urban routes with closely spaced bus stops and traffic junctions; (ii) inter-district routes containing a number of stop-and-go activities and a significant portion of smoother high speed driving; and (iii) early morning express routes and mid-night routes connecting remote residential areas and urban areas. These cycles highlighted the unique low-speed and aggressive driving characteristics of bus transport in Hong Kong with frequent stop-and-go activities. The findings from this study would definitely be helpful in assessing the exhaust emissions, fuel consumptions as well as energy consumptions of bus transport. The bottom-up clustering approach adopted in this study would also be useful in identifying specific driving patterns based on vehicle speed trip data with mixed driving characteristics. It is believed that this approach is especially suitable for assessing fixed route public transport modes with mixed driving characteristics.