Characteristic analysis for odor gas emitted from food waste anaerobic fermentation in the pretreatment workshop

Gas chromatography–mass spectrometry, olfactometry, and other related methods were applied for the qualitative and quantitative analysis of the characteristics of odorous gases in the pretreatment workshop. The composition of odorous gases emitted from municipal food waste was also investigated in this study. The results showed that the tested gases are mainly composed of aromatic gases, which account for 49% of the total volatile organic compounds (VOC) concentrations. The nitrogenous compounds comprise 15% of the total concentration and the other gases comprise the remaining 36%. The level of odor concentration ranged from 2523 odor units (OU) m^?3 to 3577 OU m^?3. The variation of the total chemical composition ranged from 19,725 µg m^?3 to 24,184 µg m^?3. Among the selected four sampling points, the discharge outlet was detected to have the highest concentration in terms of odor, total chemical, sulfur compounds, and aromatics. The correlation analysis showed that the odor concentrations were evidently related to the total chemical composition, sulfur compounds, and aromatics (P < 0.05, n = 5). The odor activity value analysis identified the top three compounds, hydrogen sulfide (91.8), ethyl sulfide (35.8), and trimethylamine (70.6), which contribute to air pollution complaint of waste materials.

Implications: Currently, the amount of food waste has rapidly increased, which leads to difficulty in waste management and more odorous gases released as air pollution. In processing of food wastes by anaerobic fermentation, odorous gases are generated, which significantly affect the workers and occupants in the plant. In the pretreatment workshop for anaerobic decomposition, the odorous gases are generated because of the stacking and decomposition of food wastes. The gases emitted mainly consist of organic gases because the food wastes are mainly organic materials. The other odors that comprise 1% of the gases are S-compounds, aromatics, esters, alkanes, and limonene, which result in unpleasant odors that are harmful to the health.     

Fenton试剂法降解餐厨垃圾异味

自行设计Fenton试剂法降解还原性气体异味的反应器,研究了Fenton试剂法处理餐厨垃圾异味主要成分(苯、乙酸乙酯、苯乙烯)的降解效果。以苯为典型代表物,优化得出该实验的最佳反应条件为:pH=3,FeSO4.7H2O投加量为1 g/L液相,30%H2O2投加量为10 mL/L液相,紫外光源辅助。结果证明,Fenton试剂法处理单一异味气体的效果较理想,在前180 min内能达到90%以上,该法在处理气态异味污染物方面具有广阔的应用前景。     

Effectiveness of Capture Zones Generated by Intermittent Pumping of a PV‐Powered Pump‐and‐Treat System Without Energy Storage

A common technology to remediate and/or contain contaminated groundwater is pump‐and‐treat remediation (P&T). Traditionally, P&T systems have been designed to operate continuously to achieve steady‐state capture zones, for which large amounts of energy are required. Green and sustainable remediation (GSR) is emerging as a viable method to minimize the adverse effects of remediation on the environment. One of the challenges associated with photovoltaic‐ (PV‐) powered P&T systems is the assessment of their performance given the intermittent nature of the power availability. This article characterizes the hydraulic containment effectiveness of a PV‐powered P&T system without energy storage using data collected at two different remediation sites, a Dry‐Cleaning Environmental Response Trust Fund site in Rolla, Missouri, and the Former Nebraska Ordnance Plant near Mead, Nebraska. Additionally, a method to estimate the effectiveness of the hydraulic containment as a function of the total volume of groundwater expected to be extracted is being proposed. Two transient and a continuously pumped capture zones were modeled using Visual MODFLOW^® 2012.1 along with MODPATH and compared. The study shows that smaller capture zones will be generated from intermittent pumping when compared to continuous pumping. © 2013 Wiley Periodicals, Inc.     

企业环境信息自愿披露法律问题研究

企业环境信息自愿公开是企业环境信息公开的重要组成部分,是促进环境保护和可持续发展的重要举措。企业环境信息自愿披露与强制披露有着明显的区别;通过法律责任的设置,保证企业自愿披露的环境信息的质量;运用各种激励措施鼓励企业自愿披露环境信息,建立企业环境信息自愿披露的健康机制。     

Temporal trends of elements in Turin (Italy) atmospheric particulate matter from 1976 to 2001

The temporal trends of major, minor and trace elements in the total atmospheric particulate sampled in the urban area of Turin (Italy) were determined for the following years: 1976, 1986, 1996 and 2001. The wavelength dispersive X-ray fluorescence (WD-XRF) technique was adopted to determine the concentrations of Ba, Br, Ca, Cl, Cr, Cu, Fe, K, Mg, Mn, Ni, Pb, S, Ti and Zn. A smaller number of samples was also analysed by ICP atomic emission spectroscopy (ICP-AES) and the results were compared with those obtained by WD-XRF to confirm their validity. A clear seasonal pattern with higher concentrations of the aforementioned elements in the cold periods was observed. Moreover, a change in the chemical composition of atmospheric particulate matter was evidenced, particularly between the first (1976 and 1986) and the last (1996 and 2001) years. This change can be attributed both to the greater contribution of Pb and Br to atmospheric pollution in the past and, in recent years, to the higher level of pollutants associated with increased vehicular traffic and industrial activities. The application of chemometric techniques (Principal Component Analysis and Cluster Analysis) allowed us to speculate about the main emitting sources influencing the total atmospheric particulate in these years.     

Comparative study of accessibility of distinctive pesticides

Interactions of micro-contaminants with soil may play a crucial role in their environmental fate and possible harmful effects. Major goals of our investigations were to model the availability of widely used pesticides and characterize adsorption capabilities of distinctive soil types by the accomplishment of extensive comparative studies and application of several extraction methods. Environmental and biological relevance of these examinations is enhanced by the fact that intrinsic features and specific details of pesticide accessibility have not been revealed so far by a comparative approach. Five different experimental methods were assessed for modelling accessibility of five selected pesticides. The applied models for regaining the pesticides showed diverse efficiency in extraction capability in cases of the different soil types (sandy, brown forest and alluvial soils). The amounts of the obtained pesticides were determined by using gas-chromatography coupled to mass spectrometry (GC-MS) and high pressure liquid chromatography coupled to mass spectrometry (HPLC-MS). Accessibility of pesticides was also compared in cases of sterilized and real soil samples in order to estimate the extent of the influence of microflora. Aqueous extraction solvents proved to be suitable for accurate assessment of the accessible amounts of pesticides, as their effectivity was at least as high as that of the applied organic solvents. In our studies pesticide-soil interactions have comprehensively been characterized, and possible influences of environmental factors on the accessibility have also been revealed. Our study might be regarded as a tentative approach to model some significant circumstances playing key roles in pesticides' possible bioavailability.     

An integrated approach to identify the origin of PM10 exceedances

Purpose

This study was aimed to the development of an integrated approach for the characterization of particulate matter (PM) pollution events in the South of Italy.

Methods

PM₁₀ and PM_2.5 daily samples were collected from June to November 2008 at an urban background site located in Bari (Puglia Region, South of Italy). Meteorological data, particle size distributions and atmospheric dispersion conditions were also monitored in order to provide information concerning the different features of PM sources.

Results

The collected data allowed suggesting four indicators to characterize different PM₁₀ exceedances. PM_2.5/PM₁₀ ratio, natural radioactivity, aerosol maps and back-trajectory analysis and particle distributions were considered in order to evaluate the contribution of local anthropogenic sources and to determine the different origins of intrusive air mass coming from long-range transport, such as African dust outbreaks and aerosol particles from Central and Eastern Europe. The obtained results were confirmed by applying principal component analysis to the number particle concentration dataset and by the chemical characterization of the samples (PM₁₀ and PM_2.5).

Conclusions

The integrated approach for PM study suggested in this paper can be useful to support the air quality managers for the development of cost-effective control strategies and the application of more suitable risk management approaches.     

End-of-Life Vehicles management: Italian material and energy recovery efficiency

Each European Member State must comply with Directive 2000/53/EC recycling and recovery targets by 2015, set to 85% and 95%, respectively. This paper reports a shredder campaign trial developed and performed in Italy at the beginning of 2008. It turns out to be the first assessment about the critical aspects belonging to the Italian End-of-Life Vehicles (ELVs) reverse supply chain involving 18 dismantling plants, a shredder plant and 630 ELV representatives of different categories of vehicles treated in Italy during 2006. This trial aims at improving the experimental knowledge related to ELVs added waste, pre-treatment, part reuse, recycling and final metal separation and car fluff disposal. Finally, the study also focuses on the calculation of the effective Italian ELV recycling rate, which results equal to 80.8%, and auto shredder residue (ASR) characterization. According to the results obtained in this work, ASR still contains up to 8% of metals and 40% of polymers that could be recovered. Moreover, physical-chemical analysis showed a Lower Heat Value of almost 20,000 kJ/kg and revealed the presence of pollutants such as heavy metals, mineral oils, PCBs and hydrocarbons.     

Bi2WO6催化剂的合成和表征及其光催化活性

以Bi（NO3）3和Na2WO4为原料,采用水热法合成了可见光催化剂Bi2WO6,并采用X射线衍射仪和BET法对其进行了表征。考察了合成温度、Bi2WO6加入量、邻氯苯酚（2-CP）浓度、溶液pH等对2-CP光催化降解效果的影响。实验结果表明：在加入140℃下合成的Bi2WO6催化剂1g／L、原始pH（pH=5．85）、可见光光照210min的条件下,对质量浓度为20mg／L的2-CP溶液进行处理,2-CP去除率最高为97．2％;添加少量H2O2对2-CP的降解有促进作用。     

Enhanced Cr bioleaching efficiency from tannery sludge with coinoculation of Acidithiobacillus thiooxidans TS6 and Brettanomyces B65 in an air-lift reactor

Bioleaching process has been demonstrated to be an effective technology in removing Cr from tannery sludge, but a large quantity of dissolved organic matter (DOM) present in tannery sludge often exhibits a marked toxicity to chemolithoautotrophic bioleaching bacteria such as Acidithiobacillus thiooxidans. The purpose of the present study was therefore to enhance Cr bioleaching efficiencies through introducing sludge DOM-degrading heterotrophic microorganism into the sulfur-based sludge bioleaching system. An acid-tolerant DOM-degrading yeast strain Brettanomyces B65 was successfully isolated from a local Haining tannery sludge and it could metabolize sludge DOM as a source of energy and carbon for growth. A combined bioleaching experiment (coupling Brettanomyces B65 and A. thiooxidans TS6) performed in an air-lift reactor indicated that the rates of sludge pH reduction and ORP increase were greatly improved, resulting in enhanced Cr solubilization. Compared with the 5 days required for maximum solubilization of Cr for the control (single bioleaching process without inoculation of Brettanomyces B65), the bioleaching period was significantly shorten to 3 days for the combined bioleaching system. Moreover, little nitrogen and phosphorous were lost and the content of Cr was below the permitted levels for land application after 3 days of bioleaching treatment.