Providing parental care entails variable mating opportunity costs for male Temminck’s stints

Males of many species theoretically face a fitness tradeoff between mating and parental effort, but quantification of this is rare. We estimated the magnitude of the mating opportunity cost paid by incubating male Temminck’s stints (Calidris temminckii), taking advantage of uniparental care provided by both sexes in this species. “Incubating males” provide all care for an early clutch, limiting subsequent mating possibilities. “Non-incubating” males include males that failed to obtain, lost to predation, or actively avoided incubating clutches. These males were free to pursue extrapair copulations and to mate with females laying later clutches, which females usually incubate themselves. Male incubation classes did not differ in measures of quality, and many individuals changed classes between years, suggesting the use of conditional reproductive tactics. However, specialist non-incubators may also exist. Using microsatellites to assign parentage, we compare males’ total fertilizations and the subset “free of care” fertilizations between incubation classes. Incubators were more likely to gain at least one fertilization per season and averaged one more per season than non-incubators. However, successful non-incubators were more likely to gain “free of care” fertilizations, averaging two more than successful incubators. The relative success of male incubation classes also changed with local sex ratios. With higher female proportions, non-incubators gained disproportionately more offspring, suggesting that the use of tactics should be partly determined by the availability of potentially incubating females. Overall, we estimate the opportunity cost of incubating to be 13–25 % of the potential annual reproductive output.     

Determination of In Situ Esterification Parameters of Citric Acid-Glycerol Based Polymers for Wood Impregnation

The development of wood treatments is of increasing industrial importance. A novel technique for improving the properties of lodgepole pine and white pine through modification of the microstructure is described. The present investigation is devoted to the synthesis and determination of in situ parameters of citric acid and glycerol based polymers for wood impregnation. This solvent free approach is environmentally friendly and achieved through an esterification condensation reaction under acidic conditions. Crude glycerol and citric acid reactants were cross-linked via a curing process at 160?°C creating a polymer with only water as the byproduct. The ester bonds and crosslinking levels were controlled using different catalysts and citric acid contents and related to the reaction time and temperature. The nature of bonding within the polymers and at the wood cell walls was determined by FT-IR analysis. The thermal properties such as glass transition temperature (T_g) were studied using TGA/DSC and the effect of citric acid content and catalyst type determined. Dimensional stability of impregnated wood samples improved above 50% for each sample with HCl and p-TSA catalysts compared to control samples. FTIR spectra were studied to show the presence of the ester linkages of the polymer in situ at the wood cell walls. Bonding between the polymer and wood macromolecules were observed by scanning electron microscopy and interpreted as evidence of chemical bonds at the wood cells. When prepared using a catalyst, the polymer was intimately incorporated into wood structure significantly improving the substrate dimensional stability. Enhanced stability makes this approach of particular interest for exterior wood products especially as a green renewable option for the wood industry.     

Depurated fish as an alternative reference for field-based biomarker monitoring

The whole of the Swan-Canning Estuary, in the south-west of Australia, is impacted by human activity, and the selection of a local reference site to assess the impact of environmental contamination on the health of biota is not possible. To determine whether fish depurated under laboratory conditions could be used as an alternative to a reference site; adult black bream (Acanthopagrus butcheri) were collected from the estuary and maintained in clean water (S24) for 3 months. A suite of biomarkers of fish health were assessed, and the results were compared with field-captured black bream from three sites within the estuary (Ascot, Claisebrook, and Riverton). Comparisons of a subset of biomarkers were also made between hatchery-bred juvenile fish and the depurated fish. Biomarker levels were up to 3.8 times higher in field captured fish compared with depurated fish, while DNA integrity was lower. EROD activity was comparable in the hatchery-bred black bream to the depurated fish while s-SDH levels were two times higher in the hatchery fish. From the results obtained, field-captured black bream depurated for 3 months are suitable to determine reference/baseline levels for biomarker of health studies in estuarine environments.     

Soil acidification and foliar nutrient status of Ontario's deciduous forest in 1986 and 2005

To assess the impacts of the decline in sulphur (S) deposition over the past 20 years in Ontario, soil chemistry and sugar maple (Acer saccharum Marsh) foliar chemistry were measured at 17 sites in south and central Ontario in 2005 and compared with archived samples collected in 1986. Foliar S concentrations were lower in 2005, reflecting the decline in S deposition whereas foliar N remained unchanged, reflecting the lack of change in N deposition in Ontario. Mineral soil pH, exchangeable base cations were lower in 2005 whereas total S, N and cation exchange capacity (CEC) were unchanged. Foliar concentrations of Ca were positively related to soil Ca levels in the A-horizon and were lower in 2005. Despite evidence of increasing soil acidity and losses of calcium, foliar base cation concentrations at most sites were adequate for sugar maple and forest health in terms of canopy appearance (Decline Index) improved.     

Spatial and temporal variations in traffic-related particulate matter at New York City high schools

Relatively little is known about exposures to traffic-related particulate matter at schools located in dense urban areas. The purpose of this study was to examine the influences of diesel traffic proximity and intensity on ambient concentrations of fine particulate matter (PM_2.5) and black carbon (BC), an indicator of diesel exhaust particles, at New York City (NYC) high schools. Outdoor PM_2.5 and BC were monitored continuously for 4–6 weeks at each of 3 NYC schools and 1 suburban school located 40 km upwind of the city. Traffic count data were obtained using an automated traffic counter or video camera. BC concentrations were 2–3 fold higher at urban schools compared with the suburban school, and among the 3 urban schools, BC concentrations were higher at schools located adjacent to highways. PM_2.5 concentrations were significantly higher at urban schools than at the suburban school, but concentrations did not vary significantly among urban schools. Both hourly average counts of trucks and buses and meteorological factors such as wind direction, wind speed, and humidity were significantly associated with hourly average ambient BC and PM_2.5 concentrations in multivariate regression models. An increase of 443 trucks/buses per hour was associated with a 0.62 μg/m³ increase in hourly average BC at an NYC school located adjacent to a major interstate highway. Car traffic counts were not associated with BC. The results suggest that local diesel vehicle traffic may be important sources of airborne fine particles in dense urban areas and consequently may contribute to local variations in PM_2.5 concentrations. In urban areas with higher levels of diesel traffic, local, neighborhood-scale monitoring of pollutants such as BC, which compared to PM_2.5, is a more specific indicator of diesel exhaust particles, may more accurately represent population exposures.     

Characterization of the archaeal community fouling a membrane bioreactor

Biofilmformation, one of the primary causes of biofouling, results in reducedmembrane flux or increased transmembrane pressure and thus represents a major impediment to the wider implementation of membrane bioreactor (MBR) technologies for water purification. Most studies have focused on the role of bacteria in membrane fouling as they are the most dominant and best studied organisms present in the MBR. In contrast, there is limited information on the role of the archaeal community in biofilm formation in MBRs. This study investigated the composition of the archaeal community during the process of biofouling in an MBR. The archaeal community was observed to have lower richness and diversity in the biofilmthan the sludge during the establishment of biofilms at low transmembrane pressure (TMP). Clustering of the communities based on the Bray-Curtis similarity matrix indicated that a subset of the sludge archaeal community formed the initial biofilms. The archaeal community in the biofilm was mainly composed of Thermoprotei, Thermoplasmata, Thermococci, Methanopyri, Methanomicrobia and Halobacteria. Among them, the Thermoprotei and Thermoplasmata were present at higher relative proportions in the biofilms than they were in the sludge. Additionally, the Thermoprotei, Thermoplasmata and Thermococci were the dominant organisms detected in the initial biofilms at low TMP, while as the TMP increased, the Methanopyri, Methanomicrobia, Aciduliprofundum and Halobacteria were present at higher abundances in the biofilms at high TMP.     

National contributions to global ecosystem values

Current conservation templates prioritize biogeographic regions with high intensity ecosystem values, such as exceptional species richness or threat. Intensity-based targets are an important consideration in global efforts, but they do not capture all available opportunities to conserve ecosystem values, including those that accrue in low intensity over large areas. We assess six globally-significant ecosystem values—intact wilderness, freshwater availability, productive marine environments, breeding habitat for migratory wildlife, soil carbon storage, and latitudinal potential for range shift in the face of climate change—to highlight opportunities for high-impact broadly-distributed contributions to global conservation. Nations can serve as a cohesive block of policy that can profoundly influence conservation outcomes. Contributions to global ecosystem values that exceed what is predicted by a nation's area alone, can give rise to countries with the capacity to act as ‘conservation superpowers’, such as Canada and Russia. For these conservation superpowers, a relatively small number of national policies can have environmental repercussions for the rest of the world.     

Applying the Protective Role of Condensed Tannins to Acrylic-based Surface Coatings Exposed to Accelerated Weathering

Condensed tannins, extractable from tree bark have been assessed as functional additives to provide a protective role to acrylic-based coating resins. In addition to retaining high antioxidant capacity, the UV absorption properties of native and chemically modified tannins were found to be variously impacted by pH and degree of esterification or etherification. When added to acrylic-based coatings, these tannins were found to contribute colour to a white-base, but only small perceptive differences were found for clear coated wood using typical additive loadings of 0.1–0.4%. Integration of tannins in native or modified form to do not inhibit the cure of acrylic coatings or found to leach from cured coating films. Accelerated weathering was used to evaluate the photo-stability of tannin-modified acrylic and styrene-acrylic coatings. Native and modified tannins with maleate or methylcarboxylate groups retaining high antioxidant activity were associated with significantly greater coating longevity and performance than use of a synthetic photostabiliser. Moreover, esterified condensed tannins with a high degree of substitution also outperformed synthetic additives indicating the inherent UV absorption potential of these materials also contributed this efficacy within the acrylic and styrene-acrylic coating systems.     

Accounting for adaptive capacity and uncertainty in assessments of species’ climate‐change vulnerability

Climate‐change vulnerability assessments (CCVAs) are valuable tools for assessing species’ vulnerability to climatic changes, yet failure to include measures of adaptive capacity and to account for sources of uncertainty may limit their effectiveness. We took a more comprehensive approach that incorporates exposure, sensitivity, and capacity to adapt to climate change. We applied our approach to anadromous steelhead trout (Oncorhynchus mykiss) and nonanadromous bull trout (Salvelinus confluentus), threatened salmonids within the Columbia River Basin (U.S.A.). We quantified exposure on the basis of scenarios of future stream temperature and flow, and we represented sensitivity and capacity to adapt to climate change with metrics of habitat quality, demographic condition, and genetic diversity. Both species were found to be highly vulnerable to climate change at low elevations and in their southernmost habitats. However, vulnerability rankings varied widely depending on the factors (climate, habitat, demographic, and genetic) included in the CCVA and often differed for the 2 species at locations where they were sympatric. Our findings illustrate that CCVA results are highly sensitive to data inputs and that spatial differences can complicate multispecies conservation. Based on our results, we suggest that CCVAs be considered within a broader conceptual and computational framework and be used to refine hypotheses, guide research, and compare plausible scenarios of species’ vulnerability to climate change.