Estimating the Effective Population Size of Conserved Populations

Accurate estimation of effective population size is important in attempts to conserve small populations of animals or plants. We review the genetic and ecological methods that have been used to estimate effective population size in the past and suggest that, while genetic methods may often be appropriate for the estimation of N _e, and its monitoring, ecological methods have the advantage of providing data that can help predict the effect of a changed environment on N _e. Estimation of N _e, is particularly complex in populations with overlapping generations, and we summarize previous empirical estimates of N _e that used ecological methods in such populations. Since it is often difficult to assess what parameters and assumptions have been used in previous calculations, we suggest a method that provides a good estimate of N _e, makes clear what assumptions are involved, and yet requires a minimum of information. The method is used to analyze data from 14 studies. In 36% (5) of these studies, our estimate is in excellent agreement with the original, and yet we use significantly less information, in 21% (3) the original estimate is markedly lower, in 43% (6) it is markedly higher. Reasons for the discrepancies are suggested. Two of the underestimates involve a failure in the original to account for a long maturation time, and four of life overestimates involve problems in the original with the correction for overlapping generations.     

Collaborative Modeling for Decision Support in Water Resources: Principles and Best Practices

Collaborative Modeling for Decision Support integrates collaborative modeling with participatory processes to inform natural resources decisions. Practitioners and advocates claim that the approach will lead to better water management, balancing interests more effectively and reducing the likelihood of costly legal delays. These claims are easy to make, but the benefits will only be realized if the process is conducted effectively. To provide guidance for how to conduct an effective collaborative modeling process, a task committee cosponsored by the Environmental Water Resources Institute (EWRI) of the American Society of Civil Engineers and by the U.S. Army Corps of Engineers' Institute for Water Resources developed a set of Principles and Best Practices for anyone who might convene or conduct collaborative modeling processes. The guidance is intended for both conflict resolution professionals and modelers, and our goal is to integrate these two fields in a way that will improve water resources planning and decision making. Here, the set of eight principles is presented along with a selection of associated best practices, illustrated by two different case examples. The complete document is available at: http://www.computeraideddisputeresolution.us/bestpractices/ .     

Influence of Targets and Assessment Region Size on Perceived Conservation Priorities

We used an existing conservation opportunity area (OA) data layer for four contiguous ecological subsections within the Ozark Highlands to quantitatively evaluate the influence of conservation targets and assessment region size on conservation priorities. OAs are natural and seminatural land-cover patches that are away from roads and away from patch edges. To evaluate the influence of targets, we assigned a priority score to each OA polygon for each of five different conservation targets, including land-cover patch size, landform representation, target vertebrate richness, target breeding bird richness, and target land cover. The top-scoring OAs for each target were added to an OA selection set for that target until 50% of the study area was chosen. These five OA selection sets were overlain to quantify overlap in priorities. Only 1.6% of the study area, or 2.1% of all OA polygons, was selected by all five targets. To evaluate the influence of assessment region size, we compared results of priority ranking of OAs relative to the entire study area against a merged set of priority rankings established separately relative to each of the four subsections within the study area. When high-priority OAs were added until 25% of the region was within the selection set for each of the five targets, the sets based on the whole study area versus each subsection evaluated separately overlapped from 45.4% to 81.9%. Thus, perceived priorities of conservation assessments are strongly influenced both by the targets that are evaluated and by the size of the assessment region.     

The effects of ethylene chlorohydrin on fatty acid synthesis 1 2 3

Abstract

Male chicks weighing 700 to 900 g. received an acute or eight doses IG of 60 or 40 mg/kg ethylene chlorohydrin (ECH) respectively and were sacrificed eighteen hours after the last dose. Mitochondrial elongation of fatty acids was decreased significantly while fatty acid synthetase activity was not significantly affected by ECH treatment. Cytochrome c oxidase activity in fresh whole liver homogenate was significantly higher in chicks subjected to acute exposure with ECH when compared to the controls. Upon freezing and thawing of homogenates, cytochrome c oxidase activity increased significantly in the control group but was unchanged in the ECH group which suggests that the mitochondrial membrane integrity is compromised by the ECH treatment. Serum and liver triglyceride levels were significantly elevated in both the single and multiple ECH dose groups. Liver to body weight ratios were significantly higher in both treatment groups when compared to their controls. Histological examination of the liver of ECH‐treated chicks showed cytoplasmic clearing of the cells but no vacuolization or centri‐lobular necrosis. Serum isocitrate dehydrogenase levels were significantly higher in the multiple treatment ECH group than in the control group.     

Effects of Chronic Doses of Ozone on Field-Grown Loblolly Pine: Seedling Responses in the First Year

A study was designed to examine responses of loblolly pine (Pinus taeda) to chronic exposure to ozone (O₃) in the field. Seedlings of four full-sib families of loblolly pine were planted in a field near Raleigh, NC, and exposed daily (May 27 to October 24, 1985) in open-top chambers to O₃ ranging from 0.5 to 1.96 times the O₃ concentration in non-filtered (NF) air. One-fourth of the plants in each plot were removed during each of two harvests (August and October) to measure effects of O₃ on plant growth. Plants of each family exhibited foliar symptoms characteristic of O3 injury after five months of exposure to any greater-than-ambient O₃ concentration, and one family exhibited symptoms after five months of exposure to NF air. Ozone dose-plant response relationships were quantified by regression for stem height, stem diameter, biomass, and other plant morphological and yield characteristics. All relationships were linear for three families, but one family exhibited no significant growth response relationship of O₃ dose. Dose-response equations suggest a maximum growth suppression of 10 percent for NF air compared to charcoal-filtered air (i.e., 0.5 × NF) in the first season of exposure.     

A Constant-Volume Rapid Exhaust Dilution System for Motor Vehicle Particulate Matter Number and Mass Measurements

Abstract

An improved version of the constant volume sampling (CVS) methodology that overcomes a number of obstacles that exist with the current CVS dilution tunnel system used in most diesel and gasoline vehicle emissions test facilities is presented. The key feature of the new sampling system is the introduction of dilution air immediately at the vehicle tailpipe. In the present implementation, this is done concentrically through a cylindrical air filter. Elimination of the transfer hose conventionally used to connect the tailpipe to the dilution tunnel significantly reduces the hydrocarbon and particulate matter (PM) storage release artifacts that can lead to wildly incorrect particle number counts and to erroneous filter-collected PM mass. It provides accurate representations of particle size distributions for diesel vehicles by avoiding the particle coagulation that occurs in the transfer hose. Furthermore, it removes the variable delay time that otherwise exists between the time that emissions exit the tailpipe and when they are detected in the dilution tunnel. The performance of the improved CVS system is examined with respect to diesel, gasoline, and compressed natural gas vehicles.     

The relevance of physicochemical and biological parameters for setting emission limit values for plants treating complex industrial wastewaters

The influents of plants treating complex industrial wastewaters from third parties may contain a large variety of often unknown or unidentified potentially harmful substances. The conventional approach of assessing and regulating the effluents of these plants is to set emission limit values for a limited set of physicochemical parameters, such as heavy metals, biological oxygen demand, chemical oxygen demand and adsorbable organic halogen compounds. The objective of this study was to evaluate the relevance of physicochemical parameters for setting emission limit values for such plants based on a comparison of effluent analyses by physicochemical and biological assessment tools. The results show that physicochemical parameters alone are not sufficient to evaluate the effectiveness of the water treatment plants for removing hazardous compounds and to protect the environment. The introduction of toxicity limits and limits for the total bioaccumulation potential should be considered to supplement generic parameters such as chemical oxygen demand and adsorbable organic halogens. A recommendation is made to include toxicity screening as a technique to consider in the determination of best available techniques (BAT) during the upcoming revision of the BAT reference document for the waste treatment industries to provide a more rational basis in decisions on additional treatment steps.     

Characterization of the archaeal community fouling a membrane bioreactor

Biofilmformation, one of the primary causes of biofouling, results in reducedmembrane flux or increased transmembrane pressure and thus represents a major impediment to the wider implementation of membrane bioreactor (MBR) technologies for water purification. Most studies have focused on the role of bacteria in membrane fouling as they are the most dominant and best studied organisms present in the MBR. In contrast, there is limited information on the role of the archaeal community in biofilm formation in MBRs. This study investigated the composition of the archaeal community during the process of biofouling in an MBR. The archaeal community was observed to have lower richness and diversity in the biofilmthan the sludge during the establishment of biofilms at low transmembrane pressure (TMP). Clustering of the communities based on the Bray-Curtis similarity matrix indicated that a subset of the sludge archaeal community formed the initial biofilms. The archaeal community in the biofilm was mainly composed of Thermoprotei, Thermoplasmata, Thermococci, Methanopyri, Methanomicrobia and Halobacteria. Among them, the Thermoprotei and Thermoplasmata were present at higher relative proportions in the biofilms than they were in the sludge. Additionally, the Thermoprotei, Thermoplasmata and Thermococci were the dominant organisms detected in the initial biofilms at low TMP, while as the TMP increased, the Methanopyri, Methanomicrobia, Aciduliprofundum and Halobacteria were present at higher abundances in the biofilms at high TMP.     

Relationship between the loading rate of inorganic mercury to aquatic ecosystems and dissolved gaseous mercury production and evasion

The purpose of our study was to test the hypothesis that dissolved gaseous mercury (DGM) production and evasion is directly proportional to the loading rate of inorganic mercury [Hg(II)] to aquatic ecosystems. We simulated different rates of atmospheric mercury deposition in 10-m diameter mesocosms in a boreal lake by adding multiple additions of Hg(II) enriched with a stable mercury isotope (²⁰²Hg). We measured DGM concentrations in surface waters and estimated evasion rates using the thin-film gas exchange model and mass transfer coefficients derived from sulfur hexafluoride (SF₆) additions. The additions of Hg(II) stimulated DGM production, indicating that newly added Hg(II) was highly reactive. Concentrations of DGM derived from the experimental Hg(II) additions (“spike DGM”) were directly proportional to the rate of Hg(II) loading to the mesocosms. Spike DGM concentrations averaged 0.15, 0.48 and 0.94 ng l⁻¹ in mesocosms loaded at 7.1, 14.2, and 35.5 μg Hg m⁻² yr⁻¹, respectively. The evasion rates of spike DGM from these mesocosms averaged 4.2, 17.2, and 22.3 ng m⁻² h⁻¹, respectively. The percentage of Hg(II) added to the mesocosms that was lost to the atmosphere was substantial (33–59% over 8 weeks) and was unrelated to the rate of Hg(II) loading. We conclude that changes in atmospheric mercury deposition to aquatic ecosystems will not change the relative proportion of mercury recycled to the atmosphere.