Recycling of an industrial sludge and marine clay as light-weight aggregates

The geographical limitations of Singapore, its restricted natural resources and voluminous municipal and industrial waste streams, make environmental management a major challenge for the island state. In an attempt to find ways to reduce importation of raw materials and the waste sent to landfill, light weight aggregates were produced from marine clay and a CaF(2)-rich semiconductor industry sludge. Aggregates were produced in a bench-scale rotary kiln with three clay/sludge loadings (90/10, 70/30 and 50/50%). All three mixtures showed good bloating behavior during firing and the ceramic pellets (1-1.5cm diameter) had densities well below that required for light-weight aggregates. In the initial tests, the pore sizes of the aggregates were in general too large resulting in high water absorption. Comparisons between the composition of the two waste products and the aggregates showed a significant loss of fluorine (40-60%) during processing; a problem which may require flue gas treatment. Leach testing showed that the formed aggregates would not pose a human or environmental hazard in terms of fluorine mobilization.     

Modelling the Distribution and Quality of Sand and Gravel Resources in 3D: a Case Study in the Thames Basin,UK

Three-dimensional (3D) models are often utilised to assess the presence of sand and gravel deposits. Expanding these models to provide a better indication of the suitability of the deposit as aggregate for use in construction would be advantageous. This, however, leads to statistical challenges. To be effective, models must be able to reflect the interdependencies between different criteria (e.g. depth to deposit, thickness of deposit, ratio of mineral to waste, proportion of ‘fines’) as well as the inherent uncertainty introduced because models are derived from a limited set of boreholes in a study region. Using legacy borehole data collected during a systematic survey of sand and gravel deposits in the UK, we have developed a 3D model for a 2400 km² region close to Reading, southern England. In developing the model, we have reassessed the borehole grading data to reflect modern extraction criteria and explored the most suitable statistical modelling technique. The additive log-ratio transform and the linear model of coregionalization have been applied, techniques that have been previously used to map soil texture classes in two dimensions, to assess the quality of sand and gravel deposits in the area. The application of these statistical techniques leads to a model which can be used to generate thousands of plausible realisations of the deposit which fully reflect the extent of model uncertainty. The approach offers potential to improve regional-scale mineral planning by providing an enhanced understanding of sand and gravel deposits and the extent to which they meet current extraction criteria.

     

Chemical contamination of the East River (Dongjiang) and its implication on sustainable development in the Pearl River Delta

A recent survey reveals that water quality and river sediments of Dongjiang (the East River) have been mildly contaminated by heavy metals and organic chemicals, such as copper, lead, PCBs, PAHs and HCHs. According to photogrammertic surveys, the sources of contamination are closely related to human activities, such as domestic and industrial discharges, agricultural chemical applications and soil erosion due to deforestation. The level of water and sediment contamination is most serious at the mid-river section near the urban of Weizhou. Due to natural dilution and diffusion, the levels of contamination are slightly decreased at the medium low section of the River near Qiaotou and Matan. Nevertheless, the levels of contamination increase again in the lower river section near Shenzhen, which is a highly developed economic zone. Since Dongjiang is the major source of potable water supply for Hong Kong (nearly 80% of potable water of Hong Kong is abstracted from Dongjiang) and the other parts of the Pearl River Delta (PRD), such organic and inorganic pollution merit concern. Ironically, most of the industrial and commercial activities in the watershed of Dongjiang are business investments of Hong Kong citizens. Cross-border environmental efforts should be enhanced with collaboration of different jurisdictions to achieve targets of regional sustainability.     

Distribution and possible source of trace elements in the sediment cores of a tropical macrotidal estuary and their ecotoxicological significance

The paper presents the first document regarding concentration, distribution and possible sources of selected trace elements (Cu, Fe, Mn, Zn, Cr, Co, Ni, Pb, Al, B and Ba) in core sediments (<63 micro particle size) from the lower stretch of Hugli (Ganges) estuary, northeast coast of Bay of Bengal by ICP-AES and EDXRF to evaluate geochemical processes influencing their distribution and possible environmental consequences. The levels of elements showed a wide range of variations in different core depths, in upper and lower intertidal zones as well as among three sampling stations. The most interesting feature of the study is the downward increase of concentrations of majority of the elements reaching overall maximum values at a depth of 20-28 cm in upper littoral zone of the site located in the extreme downstream stretch of the estuary. Values of organic carbon showed very strong positive correlations with most of the elements as revealed by correlation matrix (r) values. The interelemental relationship revealed the identical behavior of element during its transport in the estuarine environment. The overall variation in concentration can be attributed to differential discharge of untreated effluents originating from industrial, agricultural, and aquacultural sources as well as from domestic sewage along with the fishing and boating activities. The resulting compositional dataset was tested by principal component analyses and cluster analyses. Pollution load index (PLI) and index of Geoaccumulation (Igeo) revealed overall low values but the enrichment factors (EFs) for Pb were typically high for all the stations. The mean concentrations of Zn and to some extent Cu exceeded the Effects Range-Low (ER-L) values in the majority of the cases indicating that there may be some ecotoxicological risk to organisms living in sediments. The concentration of the trace elements reported in this work is useful as baselines for comparison in future sediment quality studies.     

Polybrominated diphenyl ether in the East Asian environment: a critical review

Polybrominated diphenyl ethers (PBDEs) have been extensively used as flame retardants in consumer goods. Sufficient evidence shows that PBDEs have been rapidly accumulating in the environment worldwide. In Asia, deca-bromodiphenyl ether has been produced and used in large quantities, while penta-BDE has largely ceased in the mid-1990s. This paper summarizes and critically reviews the status of PBDE pollution in East Asia, with emphases on the comparisons with Europe and North America and the interpretation of the differences. In general, the concentrations of PBDEs in atmosphere, sludge, human and biological samples of East Asia are comparable to or lower than those in Europe and North America. However, in the sediments of waters near densely populated and heavily industrialized areas, PBDE levels are among the highest ever reported in the literature. In Japan and China, concentrations of PBDEs in sediment cores showed an increasing trend for the past 20-30 years. Also, PBDEs levels in human breast milk in Japan increased about 10-fold in the past 20 years. The presence of PBDEs in fur seal has increased about 150-fold in 1994 than that in 1972. Regional and inter-continental transport cannot be confirmed due to insufficient information. However, the detection of a number of PBDE congeners in a pristine lake on the Qinghai-Tibet Plateau may be an evidence of their long-range transport.     

Retention of estrogenic steroid hormones by selected New Zealand soils

We performed batch sorption experiments for 17beta-estradiol (E2) and 17alpha-ethynylestradiol (EE2) on selected soils collected from dairy farming regions of New Zealand. Isotherms were constructed by measuring the liquid phase concentration and extracting the solid phase with dichloromethane, followed by an exchange step, and analysis by HPLC and UV detection. The corresponding metabolite estrone, (E1) formed during equilibration of E2 with soil was taken into account to estimate the total percentage recoveries for the compounds, which ranged from 47-105% (E2 and E1) and 83-102% (EE2). Measured isotherms were linear, although some deviation from linearity was observed in a few soils, which was attributed to the finer textured particles and/or the allophanic nature of the soils having high surface area. There was a marked difference in K(d)(eff) (effective distribution coefficient) values for E2 and EE2 among the soils, consistent with the soils organic carbon content and ranged from 14-170 L kg(-1) (E2), and 12-40 L kg(-1) (EE2) in the soils common for both compounds. The sorption affinity of hormones in the soils followed an order: EE2相似文献   

The use of ultra filtration in trace metal speciation studies in sea water

During this work, size fractionation technique "ultra filtration" is used in speciation studies of trace elements in the coastal sea water. Filtration is the most commonly used method to fractionate trace metal species, but often only "dissolved" and "particulate" fraction. The purpose of the present study is to determine colloidal and suspended particulate concentrations of Fe, Zn, Cu, Ni, and Mn in sea water. Suspended particulate matter were separated in three different size groups namely (>2.7 microm, <2.7->0.45 microm and <0.45->0.22 microm) by suction filtration using cellulose acetate and nitrate filter membranes. Thereafter to concentrate the solution with colloidal particle <0.22 microm-1.1 nm (0.5 k Nominal Molecular Weight cut-off Limit {NMWL}), the solution obtained from filtration through <0.22 microm, is sequentially passed through the ultra-filtration membranes having pore diameters of 14 nm (300 k NMWL), 3.1 nm (50 k NMWL), 2.2 nm (30 k NMWL), 1.6 nm (10 k NMWL) and 1.1 nm (0.5 k NMWL) by using Stirred Ultra-filtration Cells, operating in concentration mode. The concentration of Fe, Zn, Cu, Ni, and Mn were measured in suspended and dissolved fraction by ion chromatography, ICP-AES and Atomic Absorption Spectrometer. The salinity of the solution in various dissolved fractions of sequential filtration varies between 30.89-34.22 parts per thousand. The maximum concentrations of colloidal Zn, Cu, Ni and Mn in dissolved fraction were in <2.2->1.6 nm fraction. In case of Fe, colloidal fractions <2.2->1.6 nm and <1.6-<1.1 nm shows higher concentration. The concentration of Zn, Cu, Ni and Mn increase with decrease in size in suspended particulate matter, while the reverse is observed in case of Fe. This size separation data that specifies the partitioning of metals between dissolved and suspended solid phases is necessary for developing physically based models of metal transport in aquatic system.     

Chromium toxicity in plants

Due to its wide industrial use, chromium is considered a serious environmental pollutant. Contamination of soil and water by chromium (Cr) is of recent concern. Toxicity of Cr to plants depends on its valence state: Cr(VI) is highly toxic and mobile whereas Cr(III) is less toxic. Since plants lack a specific transport system for Cr, it is taken up by carriers of essential ions such as sulfate or iron. Toxic effects of Cr on plant growth and development include alterations in the germination process as well as in the growth of roots, stems and leaves, which may affect total dry matter production and yield. Cr also causes deleterious effects on plant physiological processes such as photosynthesis, water relations and mineral nutrition. Metabolic alterations by Cr exposure have also been described in plants either by a direct effect on enzymes or other metabolites or by its ability to generate reactive oxygen species which may cause oxidative stress. The potential of plants with the capacity to accumulate or to stabilize Cr compounds for bioremediation of Cr contamination has gained interest in recent years.     

A measurement of community disaster resilience in Korea

Building a community that is resilient to disasters has become one of the main goals of disaster management. Communities that are more disaster resilient often experience less impact from the disaster and reduced recovery periods afterwards. This study develops a methodology for constructing a set of indicators measuring Community Disaster Resilience Index (CDRI) in terms of human, social, economic, environmental, and institutional factors. In this study, the degree of community resilience to natural disasters was measured for 229 local municipalities in Korea, followed by an examination of the relationship between the aggregated CDRI and disaster losses, using an ordinary least squares (OLS) regression method and a geographically weighted regression (GWR) method. Identifying the extent of community resilience to natural disasters would provide emergency managers and decision-makers with strategic directions for improving local communities' resilience to natural disasters while reducing the negative impacts of disasters.