Numerical simulations of heat and moisture transport in thermal protective clothing under flash fire conditions.

A numerical model of heat and moisture transport in thermal protective clothing during exposure to a flash fire was introduced. The model was developed with the assumption that textiles are treated as porous media. The numerical model predictions were compared with experimental data from different fabric systems and configurations. Additionally, with the introduction of a skin model, the parameters that affect the performance of thermal protective clothing were investigated.     

活性污泥法的动力学方程讨论及数学模型研究

活性污泥法水处理过程是一个复杂的生化反应过程,伴随有物理化学反应、生化反应、相变过程及物质与能量的转化和传递过程.通过对微生物动力学方程的讨论,进而建立动力学模型,比较了Monod方程和Contois方程分别来模拟有机碳在曝气条件下的生化去除过程.模型主要预测底物浓度、溶解氧、微生物增长等引起的系统响应,为污水处理厂的运行提供指导.     

Sustainable construction--the role of environmental assessment tools

Construction has been accused of causing environmental problems ranging from excessive consumption of global resources both in terms of construction and building operation to the pollution of the surrounding environment, and research on green building design and using building materials to minimise environmental impact is already underway. However, relying on the design of a project to achieve the goal of sustainable development, or to minimise impacts through appropriate management on site, is not sufficient to handle the current problem. The aim for sustainability assessment goes even further than at the design stage of a project to consider its importance at an early stage, before any detailed design or even before a commitment is made to go ahead with a development. However, little or no concern has been given to the importance of selecting more environmentally friendly designs during the project appraisal stage; the stage when environmental matters are best incorporated. The main objectives of this paper are to examine the development, role and limitations of current environmental building assessment methods in ascertaining building sustainability used in different countries which leads to discuss the concept of developing a. sustainability model for project appraisal based on a multi-dimensional approach, that will allow alternatives to be ranked is discussed in detail in the paper.     

泡沫分离法处理含Cr~(6+)废水

采用间歇式泡沫分离法处理含Cr~(6+)废水,考察了各因素对Cr~(6+)去除效果的影响。通过正交实验分析确定的废水处理最佳工艺条件:废水pH 4.00,气体流量0.90 L/min,阳离子表面活性剂加入量300 mg/L。进水Cr~(6+)质量浓度为10 mg/L时,间歇运行的Cr~(6+)去除率为97.80%,连续运行的Cr~(6+)去除率为95.89%,出水均可达标排放。动力学实验结果表明,泡沫分离法去除Cr~(6+)的过程符合一级动力学的特征。对泡沫分离柱放大后的废水连续流实验分析结果表明,泡沫分离Cr~(6+)的效果比较稳定,但分离设备对废水处理效果有一定的影响。     

A novel approach to predict aquatic toxicity from molecular structure

The main aim of the study was to develop quantitative structure-activity relationship (QSAR) models for the prediction of aquatic toxicity using atom-based non-stochastic and stochastic linear indices. The used dataset consist of 392 benzene derivatives, separated into training and test sets, for which toxicity data to the ciliate Tetrahymena pyriformis were available. Using multiple linear regression, two statistically significant QSAR models were obtained with non-stochastic (R2=0.791 and s=0.344) and stochastic (R2=0.799 and s=0.343) linear indices. A leave-one-out (LOO) cross-validation procedure was carried out achieving values of q2=0.781 (scv=0.348) and q2=0.786 (scv=0.350), respectively. In addition, a validation through an external test set was performed, which yields significant values of Rpred2 of 0.762 and 0.797. A brief study of the influence of the statistical outliers in QSAR's model development was also carried out. Finally, our method was compared with other approaches implemented in the Dragon software achieving better results. The non-stochastic and stochastic linear indices appear to provide an interesting alternative to costly and time-consuming experiments for determining toxicity.     

地震现场数据共享标准化研究及其标准起草

标准化被普遍认为是保证信息更有效处理、交换、管理以及消除技术壁垒的最有效手段.信息共享标准是为规范信息共享的行为而制订的,是实现信息共享的"软"环境.通过对地震现场信息共享标准化研究,概述了这一标准制定的过程、总体内容框架安排的一些考虑以及存在问题,讨论了地震现场信息共享标准分类与编码体系、数据交换格式、元数据、数据字典及数据质量控制等与信息共享标准相关的一些问题.     

抑制斑点噪声的SAR与多光谱图像融合方法

通过将主成分变换与IHS变换相结合,避免了会导致SAR信息量损失的滤波过程,实现了一种可降低SAR斑点噪声影响的遥感影像融合算法。与主成分变换融合方法、IHS变换融合方法在主观视觉效果分析和客观统计参数两方面进行比较,新方法不仅很好地保留了多光谱影像的光谱信息,增强了结果影像的空间细节表现能力,而且有效地抑制了SAR斑点噪声,提高了结果影像的信息量与清晰度。     

Experimental Study of the Criteria of Flow Laminarization in Two-Dimensional Dense Gas Plumes

Laminarization of flow in a two-dimensional dense gas plume was experimentally investigated in this study. The plume was created by releasing CO₂ through a ground-level line source into a simulated turbulent boundary layer over an aerodynamically rough surface in a meteorological wind tunnel. The bulk Richardson number (Ri_*), based on negative plume buoyancy, plume thickness, and friction velocity, was varied over a wide range so that the effects of stable stratification on plume laminarization could be observed. A variety of ambient wind speeds as well as three different sizes of roughness arrays were used so that possible effects of roughness Reynolds number (Re_*) on plume laminarization could also be identified. Both flow visualization methods and quantitative measurements of velocity and intermittency of turbulence were used to provide quantitative assessments of plume laminarization.Flow visualization provided an overall picture of how the plume was affected by the negative buoyancy. With increasing Ri_*, both the plume depth and the vertical mixing were significantly suppressed, while upstream propagation of the plume from the source was enhanced. The most important feature of the flow revealed by visualization was the laminarization of flow in the lower part of the plume, which appeared to be closely related to both Ri_* and Re_*.Measurements within the simulated dense gas plumes revealed the influence of the stable stratification on mean velocity and turbulence intensity profiles. Both the mean velocity and turbulence intensity were significantly reduced near the surface; and these reductions systematically depended on Ri_*. The roughness Reynolds number also had considerable influence on the mean flow and turbulence structure of the dense gas plumes.An intermittency analysis technique was developed and applied to the digitized instantaneous velocity signals. It not only confirmed the general flow picture within the dense plume indicated by the flow visualization, but also clearly demonstrated the changes of flow regime with variations in Ri_* and Re_*. Most importantly, based on this intermittency analysis, simple criteria for characterizing different flow regimes are formulated; these may be useful in predicting when plume laminarization might occur.     

垂直面绿化植物遮阳系数与叶面积指数研究

比较、分析了农业研究中提出的叶面积指数LAI与用于建筑节能领域的垂直面绿化植物叶片遮阳系数SCPVW两个概念的异同和各自的应用范围。指出城市绿化采用水平或垂直绿化方式时,由于下垫面差异,植物叶片的遮阳系数应当分别采用LAI和SCPVW进行计算。