基于EMD-HHT可定位长输天然气管道第三方破坏事件监测技术

为适应目前管道安全监测需要,满足对扰动信号分类监测的实际需求,提出1种基于希尔伯变换和经验模态分解(EMD-HHT)的信号特征提取技术,利用基于φ-OTDR分布式光纤传感系统采集振动信号,通过EMD+HHT区分算法对管道沿线振动事件进行分解并提取6个典型特征向量,各特征事件数据经过EMD后选取IMF3为最终提取特征向量的原始数据,BP神经元网络可有效识别机械破坏、敲击破坏、车辆经过、人工挖掘、动力干扰5种事件。研究结果表明：在长输管道信号识别中,BP神经网络对5类事件平均识别率高达98.6%,该技术分类识别5类事件扰动信号,能够达到较高准确性,并且误报率平均在1.3%,能较好满足现场安全实时监测需求。研究结果对长输油气管道附近第三方破坏扰动信号分类监测具有一定参考意义。     

安全科学名词含义的研究方法及"安全"的含义解析

安全科学是发展中的学科,其科学名词含义争议较大,对安全实务构成较大影响,本文提出一种从国际标准化组织建立的开放浏览平台(OBP)上查阅、统计、分析安全学科名词含义的研究方法,并应用此方法分析得到"安全"含义.研究表明:安全科学中系统、组织、危险源、风险、安全等基本安全名词都已经有认可度非常高的定义,而事件、事故的定义不明确,需要重新明确;"安全是风险可接受的状态"是认可度很高的安全定义,但实用有难度,在明确定义事故的基础上,将"安全"表达为"没有事故的状态"则利于安全实务.因此,利用国际标准化组织的开放浏览平台研究安全科学名词的含义是一种可得到较高认可度的安全科学名词含义的研究方法.     

输油站库冬季消防稳高压系统的改进

介绍储运分公司北方输油站队,通过选用安全、防爆的数字显示温度控制器等技术手段,对储罐区消防给水管网裸露阀门及连接管段的防冻处理,实现冬季消防稳高压系统正常运行的施工工艺,并详细介绍了防爆数字显示温度控制器的工作原理及施工步骤。     

环境监测站做好实验室能力验证工作的思考

介绍了完成CNAL能力验证工作的一般操作程序,从样品接收到最后上报分析结果,有一份全过程的作业指导书,指出了完成能力验证时样品分析应注意的问题.     

The Properties of Poly(<Emphasis Type="SmallCaps">l</Emphasis>-Lactide) Prepared by Different Synthesis Procedure

Different synthesis methods were applied to determine optimal conditions for polymerization of (3S)-cis-3,6-dimethyl-1,4-dioxane-2,5-dione (l-lactide), in order to obtain poly(l-lactide) (PLLA). Bulk polymerizations (in vacuum sealed vessel, high pressure reactor and in microwave field) were performed with tin(II) 2-ethylhexanoate as the initiator. Synthesis in the vacuum sealed vessel was carried out at the temperature of 150 °C. To reduce the reaction time second polymerization process was carried out in the high pressure reactor at 100 °C and at the pressure of 138 kPa. The third type of rapid synthesis was done in the microwave reactor at 100 °C, using frequency of 2.45 GHz and power of 150 W at the temperature of 100 °C. The temperature in this method was controlled via infrared system for in-bulk measuring. The solution polymerization (with trifluoromethanesulfonic acid as initiator) was possible even at the temperature of 40 °C, yielding PLLA with narrow molecular weight distribution in a very short period of time (less than 6 h). The obtained polymers had the number-average molecular weights ranging from 43,000 to 178,000 g mol⁻¹ (polydispersity index ranging from 1 to 3) according to the gel permeation chromatography measurements. The polymer structure was characterized by Fourier transform infrared and NMR spectroscopy. Thermal properties of the obtained polymers were investigated using thermogravimetry and differential scanning calorimetry.     

Preparation and Properties of Starch/Nanosilicate Layer/Polycaprolactone Composites

Starch nanocomposites have been prepared using mineral clay. Montmorillonite, kaolin and a surface-modified montmorillonite by dimethyl (hydrogenated tallow alkyl) ammonium cation were used. Starch-g-PCL nanocomposites have been prepared with graft polymerization through in situ ring-opening polymerization of ε-caprolactone in the presence of starch, Sn(Oct)₂ (Tin(II) 2-ethyl hexanoate) as an initiator/catalyst and silicate layers. In fact, the related composites were prepared in solution method, bulk polymerization and in situ polymerization methods with introducing the mineral clay. The effect of kind of clay on d-spacing of silicate layers was investigated and the obtained nanocomposites were analyzed using X-ray diffraction. The obtained compounds were characterized by Fourier transform infrared (FT-IR). Morphology of the prepared nanocomposites was investigated using scanning electron microscopy and DSC enhanced the study of thermal behaviour of the prepared composite compounds.     

用微孔填充理论研究活性炭对有机气体的吸附性能

用微孔填充理论研究了活性炭C40／4对丙酮、甲苯、二氯甲烷有机气体的吸附性能,测试了该活性炭对3种有机气体在不同温度下（288．15,293．15,298．15K）的吸附结果。用D—R方程处理了实验数据,建立了3种有机气体在活性炭C40／4上的等温吸附模型,并将实验测试值与理论预测值进行了比较。实验结果表明：微孔填充理论及D—R方程可很好地描述活性炭C40／4对有机气体的吸附性能,理论预测值与实验测试值的平均相对误差小于3％;有机气体分压较高时,由于发生毛细凝聚,理论预测值较实验测试值偏低。     

混凝—催化氧化法处理丁苯橡胶生产废水

以聚合氯化铝（PAC）、阴离子聚丙烯酰胺（PAM）为混凝剂,以H2O2-O3为氧化剂,采用混凝-催化氧化法处理对丁苯橡胶生产废水。考察了混凝剂种类及其加入量、废水pH对混凝处理效果的影响,氧化剂及其加入量、反应时间和废水pH对COD去除率的影响。实验得出的最佳工艺条件：混凝实验,废水pH为7、PAC和PAM加入量为400mg／L和4mg／L;催化氧化实验,废水pH为7～8、H2O2加入量为200mg／L、H2O2与O3的质量比为0．5。处理后,废水COD从860mg／L降至145mg／L,COD去除率达83．1％,出水水质达到国家二级排放标准。     

Temporal and Spatial Relationships Between Watershed Land Use and Salt Marsh Disturbance in a Pacific Estuary

Historical and recent remote sensing data can be used to address temporal and spatial relationships between upland land cover and downstream vegetation response at the watershed scale. This is demonstrated for sub-watersheds draining into Elkhorn Slough, California, where salt marsh habitat has diminished because of the formation of sediment fans that support woody riparian vegetation. Multiple regression models were used to examine which land cover variables and physical properties of the watershed most influenced sediment fan size within 23 sub-watersheds (1.4 ha to 200 ha). Model explanatory power increased (adjusted R(2) = 0.94 vs. 0.75) among large sub-watersheds (>10 ha) and historical watershed variables, such as average farmland slope, flowpath slope, and flowpath distance between farmland and marsh, were significant. It was also possible to explain the increase in riparian vegetation by historical watershed variables for the larger sub-watersheds. Sub-watershed area is the overriding physical characteristic influencing the extent of sedimentation in a salt marsh, while percent cover of agricultural land use is the most influential land cover variable. The results also reveal that salt marsh recovery depends on relative cover of different land use classes in the watershed, with greater chances of recovery associated with less intensive agriculture. This research reveals a potential delay between watershed impacts and wetland response that can be best revealed when conducting multi-temporal analyses on larger watersheds.