Improvement potential of today’s WEEE recycling performance: The case of LCD TVs in Belgium

Waste of electrical and electronic equipment (WEEE) constitutes one of the most relevant waste streams because of the quantity and presence of valuable materials. However, there is limited knowledge on the resource potential of urban mining WEEE, as data on material composition, and the efficiency of current recycling treatments are still scarce. In this article, an evaluation of the recycling performance at a national level for one of the fastest growing e-waste streams: LCD TVs is carried out through the following four steps. Firstly, material characterisation is performed by means of sampling of the waste stream. Secondly, a material flow analysis is conducted by evaluating the separation performance of a recycling plant in Belgium. Thirdly, the recovered economic value and avoided environmental impact (EI) of the analysed recycling system is assessed. Finally, the potential of urban mining for Belgium is forecasted. The analysis shows that while recycling performance for ferrous metals and aluminium are relatively high; there is substantial room to better close the material loops for precious metals (PM) and plastics. PMs and plastics account for 66 % of the economic value in LCD TVs and 57%of the EI.With the current, commonly applied recycling technology only one-third of the PM and housing plastics are recycled; meaning that for these materials, at a national level for Belgium, there is a potential for improvement that represents 3.3 million euros in 2016 and 6.8 million euros in 2025.

Open image in new window

     

An expanded conceptual framework for solution-focused management of chemical pollution in European waters

Background

This paper describes a conceptual framework for solutions-focused management of chemical contaminants built on novel and systematic approaches for identifying, quantifying and reducing risks of these substances.

Methods

The conceptual framework was developed in interaction with stakeholders representing relevant authorities and organisations responsible for managing environmental quality of water bodies. Stakeholder needs were compiled via a survey and dialogue. The content of the conceptual framework was thereafter developed with inputs from relevant scientific disciplines.

Results

The conceptual framework consists of four access points: Chemicals, Environment, Abatement and Society, representing different aspects and approaches to engaging in the issue of chemical contamination of surface waters. It widens the scope for assessment and management of chemicals in comparison to a traditional (mostly) perchemical risk assessment approaches by including abatement- and societal approaches as optional solutions. The solution-focused approach implies an identification of abatement- and policy options upfront in the risk assessment process. The conceptual framework was designed for use in current and future chemical pollution assessments for the aquatic environment, including the specific challenges encountered in prioritising individual chemicals and mixtures, and is applicable for the development of approaches for safe chemical management in a broader sense. The four access points of the conceptual framework are interlinked by four key topics representing the main scientific challenges that need to be addressed, i.e.: identifying and prioritising hazardous chemicals at different scales; selecting relevant and efficient abatement options; providing regulatory support for chemicals management; predicting and prioritising future chemical risks. The conceptual framework aligns current challenges in the safe production and use of chemicals. The current state of knowledge and implementation of these challenges is described.

Conclusions

The use of the conceptual framework, and addressing the challenges, is intended to support: (1) forwarding sustainable use of chemicals, (2) identification of pollutants of priority concern for cost-effective management, (3) the selection of optimal abatement options and (4) the development and use of optimised legal and policy instruments.

     

Polycyclic aromatic hydrocarbons in pine and spruce shoots-temporal trends and spatial distribution

In the framework of the German environmental specimen bank one-year old spruce shoots (Picea abies) and pine shoots (Pinus sylvestris) serve as bioindicators for the atmospheric pollution. Sampling is performed in two urbanized areas in western and eastern Germany (Warndt and Duebener Heide, respectively), and in seven different rural locations. Prior to archiving conifer shoots are continuously analyzed for a set of 17 individual polycyclic aromatic hydrocarbons (PAHs). The results from the two urbanized areas show that the atmospheric contamination with PAH has declined by about 75% between 1985 and 2004 at Warndt and by about 85% between 1991 and 2004 at Duebener Heide. However, summation operatorPAH concentrations stayed virtually constant at both locations since the end of the 1990s at levels of about 100 ng g(-1) wet weight (ww). In spruce shoots from rural areas current concentrations of PAHs are significantly lower and vary between 8 and 61 ng g(-1) ww. In all shoot samples the four low molecular aromatics phenanthrene, fluoranthene, pyrene, and chrysene dominate the pattern by contributing 60 to 90% to summation operatorPAH. The group of high molecular weight aromatics is dominated by benzo[b,j,k]fluoranthene, especially in spruce shoots originating from greater altitudes remarkable amounts of six and seven ringed PAHs could be detected. Despite the strong decrease of PAH concentrations in urban areas patterns of aromatics remained nearly unchanged in the observation period 1985 to 2004.     

Identifying Change-Points in Biological Sequences via Sequential Importance Sampling

The genomes of complex organisms, including the human genome, are highly structured. This structure takes the form of segmental patterns of variation in various properties and may be caused by the division of genomes into regions of distinct function, by the contingent evolutionary processes that gave rise to genomes, or by a combination of both. Whatever the cause, identifying the change-points between segments is potentially important, as a means of discovering the functional components of a genome, understanding the evolutionary processes involved, and fully describing genomic architecture. One property of genomes that is known to display a segmental pattern of variation is GC content. The GC content of a portion of DNA is the proportion of GC pairs that it contains. Sharp changes in GC content can be observed in human and other genomes. Such change-points may be the boundaries of functional elements or may play a structural role. We model genome sequences as a multiple change-point process, that is, a process in which sequential data are separated into segments by an unknown number of change-points, with each segment supposed to have been generated by a different process. We consider a Sequential Importance Sampling approach to change-point modeling using Monte Carlo simulation to find estimates of change-points as well as parameters of the process on each segment. Numerical experiments illustrate the effectiveness of the approach. We obtain estimates for the locations of change-points in artificially generated sequences and compare the accuracy of these estimates to those obtained via Markov chain Monte Carlo and a well-known method, IsoFinder. We also provide examples with real data sets to illustrate the usefulness of this method.     

Precision,accuracy, and application of diver-towed underwater GPS receivers

Diver-towed global positioning systems (GPS) handhelds have been used for a few years in underwater monitoring studies. We modeled the accuracy of this method using the software KABKURR originally developed by the University of Rostock for fishing and marine engineering. Additionally, three field experiments were conducted to estimate the precision of the method and apply it in the field: (1) an experiment of underwater transects from 5 to 35 m in the Southern Chile fjord region, (2) a transect from 5 to 30 m under extreme climatic conditions in the Antarctic, and (3) an underwater tracking experiment at Lake Ranco, Southern Chile. The coiled cable length in relation to water depth is the main error source besides the signal quality of the GPS under calm weather conditions. The forces used in the model resulted in a displacement of 2.3 m in a depth of 5 m, 3.2 m at a 10-m depth, 4.6 m in a 20-m depth, 5.5 m at a 30-m depth, and 6.8 m in a 40-m depth, when only an additional 0.5 m cable extension was used compared to the water depth. The GPS buoy requires good buoyancy in order to keep its position at the water surface when the diver is trying to minimize any additional cable extension error. The diver has to apply a tensile force for shortening the cable length at the lower cable end. Repeated diving along transect lines from 5 to 35 m resulted only in small deviations independent of water depth indicating the precision of the method for monitoring studies. Routing of given reference points with a Garmin 76CSx handheld placed in an underwater housing resulted in mean deviances less than 6 m at a water depth of 10 m. Thus, we can confirm that diver-towed GPS handhelds give promising results when used for underwater research in shallow water and open a wide field of applicability, but no submeter accuracy is possible due to the different error sources.     

Identification of oxidized TNT metabolites in soil samples of a former ammunition plant

Water extracts of soil samples of the former ammunition plant “Tanne” near Clausthal-Zellerfeld, Lower Saxony, Germany, were investigated for highly polar oxidized 2,4,6-trinitrotoluene (TNT) metabolites. 0.4 to 9.0 mg/kg dry soil 2,4,6-trinitrobenzoic acid (TNBA) and 5.8 to 544 mg/kg dry soil 2-amino-4,6-dinitrobenzoic acid (2-ADNBA) were found. In addition to the oxidized metabolites, TNT, 4- and 2-aminodinitrotoluene (4- and 2-ADNT), and 2,4-dinitrotoluene (2,4-DNT) were extractable with water. Most interestingly, in one sample, 2-ADNBA represented the main contaminant. The origin of the oxidized nitroaromatics is unknown at this time. They might be generated chemically or photochemically. Furthermore, a biological synthesis seems possible.     

Agrochemical spray drift; assessment and mitigation--a review

During application of agrochemicals spray droplets can drift beyond the intended target to non-target receptors, including water, plants and animals. Factors affecting this spray drift include mode of application, droplet size, which can be modified by the nozzle types, formulation adjuvants, wind direction, wind speed, air stability, relative humidity, temperature and height of released spray relative to the crop canopy. The rate of fall of spray droplets depends upon the size of the droplets but is modified by entrainment in a mobile air mass and is also influenced by the rate of evaporation of the liquid constituting the aerosol. The longer the aerosol remains in the air before falling to the ground (or alternatively striking an object above ground) the greater the opportunity for it to be carried away from its intended target. In general, all size classes of droplets are capable of movement off target, but the smallest are likely to move the farthest before depositing on the ground or a non-target receptor. It is not possible to avoid spray drift completely but it can be minimized by using best-management practices. These include using appropriate nozzle types, shields, spray pressure, volumes per area sprayed, tractor speed and only spraying when climatic conditions are suitable. Field layout can also influence spray drift, whilst crop-free and spray-free buffer zones and windbreak crops can also have a mitigating effect. Various models are available to estimate the environmental exposure from spray drift at the time of application.     

Stabilization of thioarsenates in iron-rich waters

In recent years, thioarsenates have been shown to be important arsenic species in sulfidic, low-iron waters. Here, we show for the first time that thioarsenates also occur in iron-rich ground waters, and that all methods previously used to preserve arsenic speciation (acidification, flash-freezing, or EDTA addition) fail to preserve thioarsenates in such matrices. Laboratory studies were conducted to identify the best approach for stabilizing thioarsenates by combination and modification of the previously-applied methods. Since acidification was shown to induce conversions between thioarsenates and precipitation of arsenic-sulfide minerals, we first conducted a detailed study of thioarsenate preservation by flash-freezing. In pure water, thioarsenates were stable for 21 d when the samples were flash-frozen and cryo-stored with a minimal and anoxic headspace. Increasing headspace volume and oxygen presence in the headspace were detrimental to thioarsenate stability during cryo-storage. Addition of NaOH (0.1 M) or EtOH (1% V/V) counteracted these effects and stabilized thioarsenates during cryo-storage. Addition of Fe(II) to thioarsenate solutions caused immediate changes in arsenic speciation and a loss of total arsenic from solution during cryo-storage. Both effects were largely eliminated by addition of a neutral EDTA-solution, and thioarsenates were significantly stabilized during cryo-storage by this procedure. Neutralization of EDTA was required to prevent alteration of thioarsenate speciation through pH change. With the modified method (anoxic cryo-preservation by flash-freezing with minimal headspace after addition of neutralized EDTA-solution), the fractions of mono- and dithioarsenate, the two thioarsenates observed in the iron-rich ground waters, remained stable over a cryo-storage period of 11 d. Further modifications are needed for the higher SH-substituted thioarsenates (tri- and tetrathioarsenate), which were not encountered in the studied iron-rich ground waters.     

Pteris vittata – Revisited: Uptake of As and its speciation, impact of P, role of phytochelatins and S

Pteris vittata is known to hyperaccumulate As but the mechanism is poorly understood. We found an increase of As concentration with increasing soil solution As concentrations, but P application had no impact, although plant P concentrations responded to different rates of P supply. As in fronds was dominantly (82–89%) present in the form of AsIII. In roots we detected 45% as AsIII which is higher than reported in previous studies and supports substantial As-reduction to take place in roots. We detected PC2/3GS–AsIII, PC2–GS–AsIII and (PC2)2–AsIII in increasing amounts with application of As. The total amount of PC was in the range reported previously and far too small to assign a significant role in As detoxification to PCs. The close correlation between S and As in fronds and the lack of data on sulphur uptake and metabolism indicates the need for a detailed investigation on sulphur nutritional status and As metabolism in P. vittata.