Persistence and risk assessment of spiromesifen on tomato in India: a multilocational study

Supervised field trials were conducted at four different agro-climatic locations of India to evaluate the dissipation pattern and risk assessment of spiromesifen on tomato. Spiromesifen 240 SC was sprayed on tomato at 150 and 300 g a.i.?ha^?1. Samples of tomato fruits were drawn at 0, 1, 3, 5, 7, 10 and 15 days after treatment and soil at 15 days after treatment. Quantification of residues was done on gas chromatograph–mass spectrophotometer in selective ion monitoring mode in the mass range of 271–274 (m/z). The limit of quantification of the method was found to be 0.05 mg kg^?1, while the limit of determination was 0.015 mg kg^?1. Residues were found below the LOQ of 0.05 mg kg^?1 in 10 days at both the doses of application at all the locations. Spiromesifen dissipated with a half-life of 0.93–1.38 days at the recommended rate of application and 1.04–1.34 days at the double the rate of application. Residues of spiromesifen in soil were detectable level (<0.05 mg kg^?1) after 15 days of treatment. A preharvest interval (PHI) of 1 day has been recommended on tomato on the basis of data generated under All India Network Project on Pesticide Residues. Spiromesifen 240 SC has been registered for its use on tomato by Central Insecticide Board and Registration Committee, Ministry of Agriculture, Government of India. The maximum residue limit (MRL) of spiromesifen on tomato has been fixed by Food Safety Standard Authority of India, Ministry of Health and Family Welfare, Government of India as 0.3 μg/g after its risk assessment.     

Documenting measurement sensitivity and bias of field-measured parameters in water quality monitoring programs

Measurement sensitivity and bias quality control metrics are commonly reported for water-quality parameters measured in the laboratory. Less commonly recognized is that they should also be reported for field-measured parameters. Periodic evaluation helps document data quality and can help serve as early warning if there are problems with methods or techniques that could negatively affect ability to interpret threshold values and trends over time. This study focuses on traditional assessment of bias and introduces a new method for estimating measurement sensitivity of water-quality parameters measured monthly in the field. Alternative measurement sensitivity is a new data quality indicator used to demonstrate how quantifying sensitivity at the measurement level can improve understanding the uncertainty affecting each reported data value. That, in turn, can help interpret the meaning of results from many separate data points measured in the field. In this 30-month study, pH and specific conductance consistently met, and dissolved oxygen did not always meet NPS and USGS quality control standards for bias. Evaluation of dissolved oxygen bias and sensitivity during the study provided impetus to improve calibration techniques that resulted in data that later met quality goals.     

Assessment of flubendiamide residues in pigeon pea in different agro-climatic zones of India

Supervised field trials were conducted at the research farms of four agricultural universities located at different agro-climatic zones of India to find out the harvest time residues of flubendiamide and its des-iodo metabolite on pigeon pea (Cajanus cajan) during the year 2006-2007. Two spray applications of flubendiamide 20 WDG at 50 g (T(1)) and 100 g (T(2)) a.i./ha were given to the crop at 15-days interval. The foliage samples at different time intervals were drawn at only one location, however, the harvest time samples of pigeon pea grain, shell, and straw were drawn at all the four locations. The residues were estimated by HPLC coupled with UV-VIS variable detector. No residues of flubendiamide and its des-iodo metabolite were found at harvest of the crop at or above the LOQ level of 0.05 μg/g. On the basis of the data generated, a pre-harvest interval (PHI) of 28 days has been recommended and the flubendiamide 20 WDG has been registered for use on pigeon pea by Central Insecticide Board and Registration Committee, Ministry of Agriculture, Government of India and the MRL has been fixed by Ministry of Health and Family Welfare, Government of India under Prevention of Food and Adulteration as 0.05 μg/g on pigeon pea grains.     

A SIPHON GAGE FOR MONITORING SURFACE-WATER LEVELS1

A device that uses a siphon tube to establish a hydraulic connection between the bottom of an onshore standpipe and a point at the bottom of a water body was designed and tested for monitoring surface-water levels. Water is added to the standpipe to a level sufficient to drive a complete slug of water through the siphoning tube and to flush all air out of the system. The water levels in the standpipe and the water body equilibrate and provide a measurable static water surface in the standpipe. The siphon gage was designed to allow quick and accurate year-round measurements with minimal maintenance. Currently available devices for monitoring surface-water levels commonly involve time-consuming and costly installation and surveying, and the movement of reference points and the presence of ice cover in cold regions cause discontinuity and inaccuracy in the data collected. Installation and field testing of a siphon gage using 0.75-in-diameter polyethylene tubing at Ashumet Pond in Falmouth, Massachusetts, demonstrated that the siphon gage can provide long-term data with a field effort and accuracy equivalent to measurement of ground-water levels at an observation well.     

A Study of Dynamic Mechanical and Thermal Behavior of Starch/Poly(vinylalcohol) Based Films

Starch/Poly(vinylalcohol) blends in two different ratios (60:40 and 50:50) were prepared with glycerol as a plasticizer. Films were cast by a solution casting method. One set of films were filled with 10 wt% of bentonite clay and another set of films were crosslinked with epichlorohydrin in an alkaline medium. The prepared film samples were characterized with dynamic mechanical analysis (DMA) and thermogravimetric analysis (TGA). The presence of clay and crosslinking with epichlorohydrin was found to have considerable effect on the dynamic mechanical properties and thermal stability of the films. Intercomponent H-bonding between starch, Poly(vinylalcohol) and glycerol enhanced the thermal stability of the films. But incorporation of clay and crosslinking with epichlorohydrin enhanced the steric crowding and lowered the thermal stability of the films.     

Agricultural livelihood transition in the southern Yucatán region: diverging paths and their accompanying land changes

Land change science has demonstrated that rural livelihoods around the world both drive and reflect changing environmental regimes and political economic/structural transformations. This article explores the relationship between increasingly globalized rural livelihoods and in-place land change, assessing results from social surveys of smallholding households in the southern Yucatán region. We examine evidence for a transition in agricultural livelihood strategies as smallholders adjust to changing political economic and institutional conditions, and link these transitioning strategies to land use changes. Based on household surveys in 1997 and 2003, we comparatively assess both changes in the selection of livelihood strategies and in the land use and cover impacts of those strategies. Our results indicate that although impacts of given strategies have changed little over this period, there are increasing proportions of households pursuing two divergent adjustment paths—one of agricultural withdrawal and one of agricultural intensification and commercialization. We investigate what sociodemographic characteristics differentiate the groups of households following distinct livelihood strategies. Our findings point to the possibility of simultaneous and contradictory land change outcomes as smallholders adjust in different ways to their intensified incorporation into global economies.     

Objectives for management of socio-ecological systems in the Great Barrier Reef region,Australia

A wide range of goals and objectives have to be taken into account in natural resources management. Defining these objectives in operational terms, including dimensions such as sustainability, productivity, and equity, is by no means easy, especially if they must capture the diversity of community and stakeholder values. This is especially true in the coastal zone where land activities affect regional marine ecosystems. In this study, the aim was firstly to identify and hierarchically organise the goals and objectives for coastal systems, as defined by local stakeholders. Two case study areas are used within the Great Barrier Reef region being Mackay and Bowen–Burdekin. Secondly, the aim was to identify similarities between the case study results and thus develop a generic set of goals to be used as a starting point in other coastal communities. Results show that overarching high-level goals have nested sub-goals that contain a set of more detailed regional objectives. The similarities in high-level environmental, governance, and socio-economic goals suggest that regionally specific objectives can be developed based on a generic set of goals. The prominence of governance objectives reflects local stakeholder perceptions that current coastal zone management is not achieving the outcomes they feel important and that there is a need for increased community engagement and co-management. More importantly, it raises the question of how to make issues relevant for the local community and entice participation in the local management of public resources to achieve sustainable environmental, social, and economic management outcomes.     

Estimation of upper centile concentrations using historical atrazine monitoring data from community water systems

A survey sampling approach is presented for estimating upper centiles of aggregate distributions of surface water pesticide measurements obtained from datasets with large sample sizes but variable sampling frequency. It is applied to three atrazine monitoring programs of Community Water Systems (CWS) that used surface water as their drinking water source: the nationwide Safe Drinking Water Act (SDWA) data, the Syngenta Voluntary Monitoring Program (VMP), and the Atrazine Monitoring Program (AMP).The VMP/AMP CWS were selected on the basis of atrazine monitoring history (CWS having at least one annual average concentration from SDWA ≥ 1.6 ppb atrazine since 1997 in the AMP). Estimates of the raw water 95th, 99th, and 99.9th centile atrazine concentrations for the VMP/AMP CWS are 4.82, 11.85, and 34.00 ppb, respectively. The corresponding estimates are lower for the finished drinking water samples, with estimates of 2.75, 7.94, and 22.66 ppb, respectively. Finished water centile estimates for the VMP/AMP CWS using only the SDWA data for these sites are consistent with the results. Estimates are provided for the April through July period and for CWS based on surface water source type (static, flowing, or mixed). Requisite sample sizes are determined using statistical tolerance limits, relative SE, and the Woodruff interval sample size criterion. These analyses provide 99.9% confidence that the existing data include the 99.9th centile atrazine concentration for CWS raw and finished water in the Midwest atrazine high-use areas and in the nationwide SDWA dataset. The general validity of this approach is established by a simulation that shows estimates to be close to target quantities for weights based on sampling probabilities or time intervals between samples. Recommendations are given for suitable effective sample sizes to reliably determine interval estimates.     

Positive vs. false detection: A comparison of analytical methods and performance for analysis of cyclic volatile methylsiloxanes (cVMS) in environmental samples from remote regions

Contamination and analytical variation can significantly hinder trace analysis of cyclic methyl volatile siloxanes (cVMS); potentially resulting in the report of false positives at concentrations approaching detection limits. To assess detection and variation associated with trace cVMS analysis in environmental matrices, a co-operative laboratory comparison for the analysis of octametylcyclotetrasiloxane (D4), decamethylcylcopentasiloxane (D5), and dodecametylcyclohexasiloxane (D6) in sediment and biota from the Svalbard Archipelago was conducted. Two definitions of detection limits were evaluated in this study; method detection limits (MDL, matrix defined) and limits of detection (LOD, solvent defined). D5 was the only cVMS detected above both LOD (0.08–0.81 ng g⁻¹ ww) and MDL (0.47–2.36 ng g⁻¹ ww) within sediment by all laboratories where concentrations ranged from 0.55 to 3.91 ng g⁻¹ ww. The percentage of positive detects for D5 decreased by 80% when MDL was defined as the detection limit. D5 was also detected at the highest frequency among all laboratories in fish liver with concentrations ranging from 0.72 to 345 ng g⁻¹ ww. Similar to sediment, percentage of positive detects for D5 decreased by 60% across all laboratories for fish livers when using MDL (0.68–3.49 ng g⁻¹ ww). Similar observations were seen with both D4 and D6, indicating that sample matrix significantly contributes to analytical response variation. Despite differences in analytical methods used between laboratories, good agreement was obtained when using MDL to define detection limits. This study shows the importance of incorporating variation introduced by sample matrices into detection limit calculations to insure data accuracy of cVMS at low concentrations.