新安江流域土地利用结构对水质的影响

以新安江上游流域为研究区域,用该流域2010年5月TM遥感影像图作为底图,通过实地野外调查获取了新安江流域的土地利用图.运用ArcGIS的水文、空间分析功能,将流域划分为8个子流域,并分析各子流域的土地利用结构.根据2010年1～12月的水质监测数据,分析TN、TP、高锰酸盐指数、NH4+-N、粪大肠菌群的时空变化特征,以及与土地利用结构之间的定量关系.结果表明,TN和NH4+-N有明显的时间变化特征,为枯时期>丰水期>平水期,而其他几种指标没有明显的时间变化.在空间上,整体上呈现出渔梁、浦口污染最为严重.流域内土地利用结构与水质之间的相关关系表现为:耕地、水体、建筑用地起源作用,林地、草地起汇作用.在年度上看,耕地对TN、NH4+-N、高锰酸盐指数影响最大,草地对TP影响最大;不同水期上,枯水期和丰水期,对各指标影响最大的土地利用类型为耕地,在平水期,对TN、TP、粪大肠菌群影响最大的土地利用类型分别为耕地、草地、林地.     

水解酸化工艺的研究现状与发展趋势

水解酸化工艺对各类有机物的去除率较高,可处理高浓度、难降解废水,运行费用低,在处理纺织印染、化工、造纸废水等领域发挥了重要作用。目前研究主要集中在处理复杂污染物、工艺参数优化、机理及动力学。其发展趋势大致有:与其他工艺结合,深入研究降解机理、探索微生物菌群等。     

湿法脱硫石膏脱水系统设计优化研究

对湿法脱硫石膏脱水系统进行研究,分析了几种常见的石膏脱水系统的设计方案,提出了石膏脱水系统的优化设计方案,并与变频泵配合使用,从而达到优化系统提高整个FGD经济性的目的。     

Differences in rheological and fractal properties of conditioned and raw sewage sludge

Rheological tests for raw and conditioned activated sludge(AS) or anaerobic digested sludge(ADS) show that power-law relationships can be used to describe the evolution of several rheological parameters,i.e.,limiting viscosity(η∞),yield stress(τy),cohesion energy of the sludge network(Ec),and storage modulus(G’),with total suspended solid(TSS) content in raw and conditioned sludge.A gel-like structure that behaves similar to weak-link flocs/aggregates was observed in AS and ADS.As derived from the double-logarithmic plots of G’-TSS content,the mass fractal dimensions of the raw and conditioned AS or ADS flocs/aggregates were 2.70 and 2.53 or 2.85 and 2.79,respectively.The rheological tests also indicate that both polymer conditioning and increased TSS content led to improved elastic behavior,cohesion energy,and yield stress of the sludge network,as well as expanded the corresponding linear viscoelastic range.The porosity of AS or ADS flocs/aggregates will be improved by polymer conditioning.     

Removal of Cd2+ from water by Friedel’s salt (FS: 3CaO.Al2O3·CaCl2·10H2O): Sorption characteristics and mechanisms

The development of low-cost and efficient new mineral adsorbents has been a hot topic in recent years. In this study, Friedel’s salt (FS:3CaO·A12O3 ·CaCl2 ·10H2O), a hexagonal layered inorganic absorbent, was synthesized to remove Cd2+ from water. The adsorption process was simulated by Langmuir and Freundlich models. The adsorption mechanism was further analyzed with TEM, XRD, FT-IR analysis and monitoring of metal cations released and solution pH variation. The results indicated the adsorbent FS had an outstanding ability for Cd(Ⅱ) adsorption. The maximum adsorption capacity of the FS for Cd(Ⅱ) removal can reach up to 671.14 mg/g. The nearly equal numbers of Cd2+ adsorbed and Ca2+ released demonstrated that ion-exchange (both surface and inner) of the FS for Cd(Ⅱ) played an important role during the adsorption process. Furthermore, the surface of the FS after adsorption was microscopically disintegrated while the inner lamellar structure was almost unchanged. The behavior of Cd(Ⅱ) adsorption by FS was significantly affected by surface reactions. The mechanisms of Cd2+ adsorption by the FS mainly included surface complexation and surface precipitation. In the present study, the adsorption process was fitted better by the Langmuir isotherm model (R2 = 0.9999) than the Freundlich isotherm model (R2 = 0.8122). Finally, due to the high capacity for ion-exchange on the FS surface, FS is a promising layered inorganic adsorbent for the removal of Cd(Ⅱ) from water.     

Iron and lead ion adsorption by microbial flocculants in synthetic wastewater and their related carbonate formation

Although microbial treatments of heavy metal ions in wastewater have been studied, the removal of these metals through incorporation into carbonate minerals has rarely been reported. To investigate the removal of Fe^3＋ and Pb^2＋, two representative metals in wastewater, through the precipitation of carbonate minerals by a microbial flocculant （MBF） produced by Bacillus mucilaginosus. MBF was added to synthetic wastewater containing different Fe^3＋ and Pb^2＋ concentrations, and the extent of flocculation was analyzed. CO2 was bubbled into the mixture of MBF and Fe^3＋/Pb^2＋ to initiate the reaction. The solid substrates were analyzed via X-ray diffraction, transmission electron microscopy and energy dispersive spectroscopy. The results showed that the removal efficiency decreased and the MBF adsorption capacity for metals increased with increasing heavy metal concentration. In the system containing MBF, metals （Fe^3＋ and Pb^2＋）, and CO2, the concentrated metals adsorbed onto the MBF combined with the dissolved CO2, resulting in oversaturation of metal carbonate minerals to form iron carbonate and lead carbonates. These results may be used in designing a method in which microbes can be utilized to combine CO2 with wastewater heavy metals to form carbonates, with the aim of mitigating environmental problems.     

Interface-mediated synthesis of monodisperse ZnS nanoparticles with sulfate-reducing bacterium culture

We have created a new method of ZnS nanospheres synthesis. By interface-mediated precipitation method (IMPM), monodisperse ZnS nanoparticles was synthesized on the particle surface of sulfate-reducing bacterium nutritious agar culture. Sulfate-reducing bacterium (SRB) was used as a sulfide producer because of its dissimilatory sulfate reduction capability, meanwhile produced a variety of amino acids acting as templates for nanomaterials synthesis. Then zinc acetate was dispersed into nutritious agar plate. Subsequently agar plate was broken into particles bearing much external surface, which successfully mediated the synthesis of monodisperse ZnS nanoparticles. The morphology of monodisperse ZnS nanospheres and SRB were examined by scanning electron microscopy (SEM), and the microstructure was investigated by X-ray diffraction (XRD). The thermostability of ZnS nanoparticles was determined by thermo gravimetric-differential thermo gravimetric (TG-DTG). The maximum absorption wavelengh was analysed with an ultraviolet-visible spectrophotometer within a range of 199–700 nm. As a result, monodisperse ZnS nanoparticles were successfully synthesized, with an average diameter of 80 nm. Maximum absorption wavelengh was 228 nm, and heat decomposed temperature of monodisperse ZnS nanoparticles was 596°C.     

Interface-mediated synthesis of monodisperse ZnS nanoparticles with sulfate-reducing bacterium culture

We have created a new method of ZnS nanospheres synthesis. By interface-mediated precipitation method (IMPM), monodisperse ZnS nanoparticles was synthesized on the particle surface of sulfate-reducing bacterium nutritious agar culture. Sulfate-reducing bacterium (SRB) was used as a sulfide producer because of its dissimilatory sulfate reduction capability, meanwhile produced a variety of amino acids acting as templates for nanomaterials synthesis. Then zinc acetate was dispersed into nutritious agar plate. Subsequently agar plate was broken into particles bearing much external surface, which successfully mediated the synthesis of monodisperse ZnS nanoparticles. The morphology of monodisperse ZnS nanospheres and SRB were examined by scanning electron microscopy (SEM), and the microstructure was investigated by X-ray diffraction (XRD). The thermostability of ZnS nanoparticles was determined by thermo gravimetric-differential thermo gravimetric (TG-DTG). The maximum absorption wavelengh was analysed with an ultravioletvisible spectrophotometer within a range of 199-700 nm. As a result, monodisperse ZnS nanoparticles were successfully synthesized, with an average diameter of 80 nm. Maximum absorption wavelengh was 228 nm, and heat decomposed temperature of monodisperse ZnS nanoparticles was 596℃.     

基于遥感监测的黄海绿潮漂移路径及分布面积特征分析

本文利用2008～2012年的多源卫星遥感序列图像,动态监测各年绿潮发生的漂移路径、影响海域面积,得到各年绿潮漂移趋势、分布面积和最大分布面积出现时间。根据监测结果,划分出影响绿潮漂移路径的关键区域,并分析了2008、2009和2010年关键区域内各年绿潮漂移方向和面积变化情况。     

燃气轮机驱动离心式天然气压缩机声学监测方案设计

以某压气站的燃气轮机驱动离心式天然气压缩机声学检测为例,设计燃气轮机驱动离心式天然气压缩机声学现场监测方案。根据天然气压缩机的基本工艺特征和运行现状,对各个参数监测点位置进行整体、合理的布置。选择科学有效的监测方法对天然气压缩机进行声压级、声功率级及振动现场监测。以声压级、声功率级及振动监测统计数据为依据,讨论分析天然气压缩机基本运行状况下,各个监测参数对机械设备本身性能,环境及人身健康的影响。