餐厨垃圾与污水污泥共消化产酸试验研究

研究了餐厨垃圾与污水污泥在不同混合比例、不同污泥停留时间条件下的共消化产酸效果。试验结果表明:当餐厨垃圾与污水污泥TS比为1∶3时,SRT=1 d的反应器酸化效率最高,且乙酸含量占优,产酸效果较佳;当TS之比为1∶1时,各反应器产酸量普遍高于1∶3时,其中SRT=5 d产酸反应器,最高酸化效率达5.94,产酸量最大,且乙酸含量占优,运行效果最佳。     

含铬废水的处理技术及机理简述

介绍了废水中六价铬的来源及存在形态,以及处理含铬废水的物理、物化、化学及生物等各种工艺,并对各种工艺的机理和优缺点进行分析,展望含铬废水的治理前景。     

Differences in rheological and fractal properties of conditioned and raw sewage sludge

Rheological tests for raw and conditioned activated sludge(AS) or anaerobic digested sludge(ADS) show that power-law relationships can be used to describe the evolution of several rheological parameters,i.e.,limiting viscosity(η∞),yield stress(τy),cohesion energy of the sludge network(Ec),and storage modulus(G’),with total suspended solid(TSS) content in raw and conditioned sludge.A gel-like structure that behaves similar to weak-link flocs/aggregates was observed in AS and ADS.As derived from the double-logarithmic plots of G’-TSS content,the mass fractal dimensions of the raw and conditioned AS or ADS flocs/aggregates were 2.70 and 2.53 or 2.85 and 2.79,respectively.The rheological tests also indicate that both polymer conditioning and increased TSS content led to improved elastic behavior,cohesion energy,and yield stress of the sludge network,as well as expanded the corresponding linear viscoelastic range.The porosity of AS or ADS flocs/aggregates will be improved by polymer conditioning.     

Iron and lead ion adsorption by microbial flocculants in synthetic wastewater and their related carbonate formation

Although microbial treatments of heavy metal ions in wastewater have been studied, the removal of these metals through incorporation into carbonate minerals has rarely been reported. To investigate the removal of Fe^3＋ and Pb^2＋, two representative metals in wastewater, through the precipitation of carbonate minerals by a microbial flocculant （MBF） produced by Bacillus mucilaginosus. MBF was added to synthetic wastewater containing different Fe^3＋ and Pb^2＋ concentrations, and the extent of flocculation was analyzed. CO2 was bubbled into the mixture of MBF and Fe^3＋/Pb^2＋ to initiate the reaction. The solid substrates were analyzed via X-ray diffraction, transmission electron microscopy and energy dispersive spectroscopy. The results showed that the removal efficiency decreased and the MBF adsorption capacity for metals increased with increasing heavy metal concentration. In the system containing MBF, metals （Fe^3＋ and Pb^2＋）, and CO2, the concentrated metals adsorbed onto the MBF combined with the dissolved CO2, resulting in oversaturation of metal carbonate minerals to form iron carbonate and lead carbonates. These results may be used in designing a method in which microbes can be utilized to combine CO2 with wastewater heavy metals to form carbonates, with the aim of mitigating environmental problems.     

Interface-mediated synthesis of monodisperse ZnS nanoparticles with sulfate-reducing bacterium culture

We have created a new method of ZnS nanospheres synthesis. By interface-mediated precipitation method (IMPM), monodisperse ZnS nanoparticles was synthesized on the particle surface of sulfate-reducing bacterium nutritious agar culture. Sulfate-reducing bacterium (SRB) was used as a sulfide producer because of its dissimilatory sulfate reduction capability, meanwhile produced a variety of amino acids acting as templates for nanomaterials synthesis. Then zinc acetate was dispersed into nutritious agar plate. Subsequently agar plate was broken into particles bearing much external surface, which successfully mediated the synthesis of monodisperse ZnS nanoparticles. The morphology of monodisperse ZnS nanospheres and SRB were examined by scanning electron microscopy (SEM), and the microstructure was investigated by X-ray diffraction (XRD). The thermostability of ZnS nanoparticles was determined by thermo gravimetric-differential thermo gravimetric (TG-DTG). The maximum absorption wavelengh was analysed with an ultraviolet-visible spectrophotometer within a range of 199–700 nm. As a result, monodisperse ZnS nanoparticles were successfully synthesized, with an average diameter of 80 nm. Maximum absorption wavelengh was 228 nm, and heat decomposed temperature of monodisperse ZnS nanoparticles was 596°C.     

Interface-mediated synthesis of monodisperse ZnS nanoparticles with sulfate-reducing bacterium culture

We have created a new method of ZnS nanospheres synthesis. By interface-mediated precipitation method (IMPM), monodisperse ZnS nanoparticles was synthesized on the particle surface of sulfate-reducing bacterium nutritious agar culture. Sulfate-reducing bacterium (SRB) was used as a sulfide producer because of its dissimilatory sulfate reduction capability, meanwhile produced a variety of amino acids acting as templates for nanomaterials synthesis. Then zinc acetate was dispersed into nutritious agar plate. Subsequently agar plate was broken into particles bearing much external surface, which successfully mediated the synthesis of monodisperse ZnS nanoparticles. The morphology of monodisperse ZnS nanospheres and SRB were examined by scanning electron microscopy (SEM), and the microstructure was investigated by X-ray diffraction (XRD). The thermostability of ZnS nanoparticles was determined by thermo gravimetric-differential thermo gravimetric (TG-DTG). The maximum absorption wavelengh was analysed with an ultravioletvisible spectrophotometer within a range of 199-700 nm. As a result, monodisperse ZnS nanoparticles were successfully synthesized, with an average diameter of 80 nm. Maximum absorption wavelengh was 228 nm, and heat decomposed temperature of monodisperse ZnS nanoparticles was 596℃.     

基于熵权的长沙市城市生态安全综合评估与预测

城市是一个社会-经济-自然复合生态系统,区域资源与城市自然系统是城市社会经济发展的重要基础和载体。城市生态安全评估是对未来的安全状态进行预测,以实现城市的可持续发展。文章以长沙市为例,在城市生态安全主要影响因素识别的基础上,应用PSR模型、熵权法等建立城市生态安全评估指标及计算方法,研究了长沙市近11年来生态安全的变化趋势。研究结果表明,1999-2009年间长沙生态安全的趋势由较不安全向较安全状态发展,生态安全值从25.4提高到60.7,人文环境响应是长沙生态安全改善的主导因素,资源环境压力,水土资源保持是限制长沙市生态安全的主要因素。     

昆明市主城区三种温室气体的月份和干、湿季的小时变化规律及原因分析

研究了昆明市主城区3种温室气体浓度的最新变化情况,采用2009年、2010年和2011年的月份和小时平均浓度数据,结合昆明市气候特点,对3种温室气体浓度的月份和干、湿季的小时变化规律及原因进行了分析。     

舟山典型海区浮游植物的动态变化

2009年8月～2011年5月对舟山典型海区的浮游植物群落进行调查和分析,结果表明:在该海域共鉴定到浮游植物4门45属102种。其中蓝藻门2属4种,占3.92%;绿藻门1属2种,占1.96%;硅藻门38属89种,占87.26%;甲藻门4属7种,占6.86%。浮游植物细胞丰度的年波动在2.65×104/L～3.73×104/L之间,平均值为3.04×104/L,并且在春季(5月)最高,夏季(8月)次之。主要优势种有星脐圆筛藻(Coscinodiscus asteromphalus)、中华盒形藻(Biddulphia sinensis)、夜光藻(Noctiluca scintillans)、并基角毛藻(Chaetoceros decipiens)和佛氏海线藻(Thalassionema frauenfeldii)。其中夜光藻的丰度达4.9×103/L,佛氏海线藻达2.7×103/L。在整个调查过程中硅藻一直占据优势,朱家尖、桃花岛、东极和嵊泗的硅藻种类分别占95.2%,82.1%,81.3%和86.9%。通过对浮游植物群落的多样性指数分析,可认为该调查海区浮游植物种类组成和季节变化明显,群落结构稳定。研究还表明,水质优良程度为嵊泗>东极>朱家尖>桃花岛。     

基于AERMOD2.2的兰州大学交通尾气污染模拟分析

以兰州大学校园附近两条主要交通干道排放的汽车尾气污染源成分中的碳氢化合物(NMHC)和氮氧化物(NOx)为研究对象,利用AERMOD2.2中的线源模式,模拟了两种污染物在兰州大学校园内的年均浓度贡献值。结果表明:兰州大学校园内接近线源的地方污染较严重,且两条主要交通干道受NOx的污染较大,受NMHC的污染较小。另外,介绍了不同线源模式的计算方法,并从气象资料预处理、背景图选取、方案控制和污染源设置等方面探讨了使用AERMOD2.2应注意的问题、重点和技术要点,以期为今后利用AERMOD模式预测具体线源上目标污染物对区域大气环境质量的影响提供参考和借鉴。