Modelling the transport of suspended particulate matter by the Rhone River plume (France). Implications for pollutant dispersion

A model to simulate the transport of suspended particulate matter by the Rhone River plume has been developed. The model solves the 3D hydrodynamic equations, including baroclinic terms and a 1-equation turbulence model, and the suspended matter equations including advection/diffusion of particles, settling and deposition. Four particle classes are considered simultaneously according to observations in the Rhone. Computed currents, salinity and particle distributions are, in general, in good agreement with observations or previous calculations. The model also provides sedimentation rates and the distribution of different particle classes over the sea bed. It has been found that high sedimentation rates close to the river mouth are due to coarse particles that sink rapidly. Computed sedimentation rates are also similar to those derived from observations. The model has been applied to simulate the transport of radionuclides by the plume, since suspended matter is the main vector for them. The radionuclide transport model, previously described and validated, includes exchanges of radionuclides between water, suspended matter and bottom sediment described in terms of kinetic rates. A new feature is the explicit inclusion of the dependence of kinetic rates upon salinity. The model has been applied to 137Cs and 239,240Pu. Results are, in general, in good agreement with observations.     

Treatment of chlorinated solvents by TiO2 photocatalysis and photo-Fenton: influence of operating conditions in a solar pilot plant

Titanium dioxide photocatalysis (using 20 0mg l(-1) of TiO2), under aerobic and anaerobic conditions, and photo-Fenton (2 and 56 mg l(-1) iron) were applied to the treatment of different NBCS (non-biodegradable chlorinated solvents), such as dichloroethane, dichloromethane and trichloromethane dissolved in water at 50 mg l(-1). All the tests were performed in a 35-l solar pilot plant with compound parabolic collectors (CPCs) under natural illumination. The two solar treatments were compared with attention to chloride release and TOC mineralisation, as the main parameters. Photo-Fenton was found to be the more appropriate treatment for these compounds, assuming volatilisation as a drawback of photocatalytic degradation of NBCS dissolved in water. In this context, several operating parameters related to NBCS degradation, e.g., treatment time, temperature, hydrogen peroxide consumption and volatility of parent compounds are discussed. The correct choice of operating conditions can very often diminish the problem of volatilisation during treatment.     

Biosorption of water-soluble dyes on magnetically modified Saccharomyces cerevisiae subsp. uvarum cells

Brewer's yeast (bottom yeast, Saccharomyces cerevisiae subsp. uvarum) cells were magnetically modified using water based magnetic fluid stabilized with perchloric acid. Magnetically modified yeast cells efficiently adsorbed various water soluble dyes. The dyes adsorption can be described by the Langmuir adsorption model. The maximum adsorption capacity of the magnetic cells differed substantially for individual dyes; the highest value was found for aniline blue (approx. 220 mg per g of dried magnetic adsorbent).     

Photo-Fenton-assisted ozonation of p-Coumaric acid in aqueous solution

The degradation of p-Coumaric acid present in olive oil mill wastewater was investigated as a pretreatment stage to obtain more easily biodegradable molecules, with lower toxicity that facilitates subsequent anaerobic digestion. Thus, photo-Fenton-assisted ozonation has been studied and compared with ozonation at alkaline pH and conventional single ultraviolet (UV) and acid ozonation treatments. In the combined process, the overall kinetic rate constant was split into various components: direct oxidation by UV light, direct oxidation by ozone and oxidation by hydroxyl radicals. Molecular and/or radical ozone reaction was studied by conducting the reaction in the presence and absence of tert-butylalcohol at pHs 2, 7 and 9. Ozone oxidation rate increases with pH or by the addition of Fenton reagent and/or UV radiation due to generation of hydroxyl radicals, *OH. Hydrogen peroxide and ferrous ion play a double role during oxidation since at low concentrations they act as initiators of hydroxyl radicals but at high concentrations they act as radical scavengers. Finally, the additional levels of degradation by formation of hydroxyl radicals have been quantified in comparison to the conventional single processes and an equation is proposed for the reaction rate as a function of studied operating variables.     

Efficient use of Fe metal as an electron transfer agent in a heterogeneous Fenton system based on Fe0/Fe3O4 composites

In this work a novel heterogeneous Fenton system based on Fe(0)/Fe3O4 composites is described. The composites with several Fe(0)/Fe3O4 ratios were prepared by two different methods, i.e. mechanical alloying of Fe(0) and Fe3O4 powders and controlled reduction of Fe3O4 with H2. Reaction studies and detailed Conversion Electron M?ssbauer surface characterization of the composites Fe(0)/Fe3O4, Fe(0), Fe3O4, alpha-Fe2O3 and gamma-Fe2O3 suggested that Fe2+surf species are essential to produce an active Fenton system. Kinetic studies for the oxidation of the dye methylene blue, used as an organic model molecule, and for the peroxide decomposition suggest that the reactions proceed via HO* radicals generated from Fe2+surf species and H2O2 in a Fenton like mechanism. The increase in activity caused by the addition of Fe(0) is discussed in terms of a creation of Fe2+surf species during the preparation of the composite and by an electron transfer mechanism from Fe(0) to Fe3+surf during the Fenton reaction to regenerate the Fe2+surf active species.     

Biodegradation of juvenoid diastereoisomers: radio-HPLC and MS analysis

Microbial degradation of two diastereoisomeric forms 2 and 3 of a selected juvenoid (insect juvenile hormone bioanalog), ethyl N-{2-{4-[(2-hydroxycyclohexyl)methyl]phenoxy}ethyl}carbamate was studied and the degradation products analyzed. Degradation experiments were performed using simple modeling under laboratory conditions. A Candida sp. strain T1, isolated from soil, was chosen as a biodegradation species. Radiolabeling of the studied compounds 2 and 3 was used in combination with radio-HPLC and MS analysis to increase the limits of detection, monitoring and isolation of trace quantities of the products of degradation and/or transformation. Resulting from the microbial processes using 2 or 3 as source compounds, three identical products (4-6) of their biodegradation were produced. Compound 2 also afforded two additional products (7, 8). Radio-HPLC analysis and separation, and subsequent MS analysis of the degradation mixtures resulted in identification of the degradation products. The degree and the rate of biodegradation of 2 and 3 were analyzed after 1, 3 and 7 days from the beginning of the experiment.     

高级氧化法脱除PVA浆料的清洁生产新工艺研究

为了研究高级氧化法脱除聚乙烯醇（PVA）浆料清洁生产新工艺的可行性，研究了3种高级氧化法UV／H2O2、UV／TiO2、Nation-Fe^2＋／H2O2对含PVA溶液的氧化降解，其降解效果依次为iUV／H2O2〉Nation-Fe^2＋／H2O2〉UV／TiO2。对于UV／H2O2法，PVA降解速率与H2O2的初始浓度成正相关，且H2O2浓度为2．95mmol／L时14min内就能使PVA的去除率达到98％；pH和温度对PVA的氧化降解效果影响不明显。在此基础上，对建立在高级氧化法基础上的退浆新工艺进行了探讨，结果表明，在65℃和75℃下，高级氧化法条件下的纯棉织物PVA退浆率分别达到70．16％和95．65％；该法不仅可以促进PVA从纯棉织物上的脱附，而且可以达到对PVA的较高降解效果，使得所排退浆废水的生化处理难度明显降低。     

Modeling the Entrepe?as Reservoir.

The Entrepe?as Reservoir is a monomictic reservoir located in River Tagus (Spain). The aim of this work is to establish a feasible model to predict the depth of the thermocline that is developed in the reservoir during the period of natural thermal stratification. Entrainment, eddy diffusion, inflow of external energy, and other factors are considered to calibrate the parameters of the model. The methodology involves the measure of actual temperature and electrical conductivity profiles, use of meteorological data and reservoir parameters, and selection and application of several models from the literature. The calculations and predictions are integrated to a software packet that is able to predict thermocline depth and water temperature profile during a 1-year period on a day-by-day basis. In the thermocline depth, the prediction error, on the basis of real data, is less than 6% and, in the water temperature, it is 2 degrees C.     

Antifungal and anti-aflatoxigenic activity of Heliopsis longipes roots and affinin/spilanthol against Aspergillus parasiticus by downregulating the expression of alfD and aflR genes of the aflatoxins biosynthetic pathway

Abstract

In the present study, ethanolic extract from Heliopsis longipes roots and affinin/spilanthol against Aspergillus parasiticus growth and aflatoxins production were studied in relation to the expression of aflD and aflR, two key genes of aflatoxins biosynthetic pathway. Phytochemical analysis of the ethanolic extract by GC-EIMS identified affinin/spilanthol (7.84?±?0.27?mg g^?1) as the most abundant compounds in H. longipes roots. The antifungal and anti-aflatoxigenic assays showed that affinin/spilanthol at 300?µg mL^?1 produced the higher inhibition of radial growth (95%), as well as, the higher aflatoxins production inhibition (61%) in comparison to H. longipes roots (87% and 48%, respectively). qRT-PCR revealed that the expression of aflD and aflR genes showed a higher downregulation in affinin/spilanthol at 300?µg mL^?1. The expression ratio of alfD was suppressed by affinin/spilanthol in 79% and aflR in 84%, while, a lower expression ratio suppressed by H. longipes was obtained, alfD (55%) and aflR (59%). Affinin/spilanthol possesses higher antifungal and anti-aflatoxigenic activity against A. parasiticus rather than H. longipes roots, and this anti-aflaxotigenic activity occurring via downregulation of the aflD and aflR genes. Thus, H. longipes roots and affinin/spilanthol can be considered potent antifungal agents against aflatoxigenic fungus, especially, affinin/spilanthol.     

The economic benefits of fulfilling the World Health Organization’s limits for particulates: A case study in Algeciras Bay (Spain)

Algeciras Bay is an important industrial and port zone in the south of Spain whose pollution by particulate matter surpasses the threshold levels recommended by the World Health Organization (WHO) in its 2005 Guide on Air Quality. This study analyses the mortality avoided and the economic benefit which would be derived from a reduction of the pollution of PM2.5 and PM10 to the levels recommended by the WHO in Algeciras Bay in the period 2005-2015. The analysis carried out shows that the industrial zones, such as Los Barrios and San Roque, are those which have greater levels of pollution and in which the relative risk is greater. The calculations for Algeciras Bay between 2000 and 2015 show 182 deaths which would be avoided if the particulate matter pollution were reduced to the levels recommended by the WHO. Likewise, the economic valuation which this impact has on health is carried out through two concepts: the cost of illness and the Value of Statistical Life (VSL). The result shows that the economic benefit that would come out with the cost of illness valuation is 5,329,110€ and from the VSL is 414,787,113€.

Implications: PM_2.5 has a greater concentration in industrial localities and is linked to the industrial activity. When the particulate matter pollution is reduced to the levels recommended by the WHO in an industrialised area such as Algeciras (Spain), 182 deaths which would be avoided. The result shows that the economic benefit that would come out with the cost of illness valuation is 5,329,110€ and from the value of statistical life is 414,787,113€.