Winter arsenic pollution in 10 forest ecosystems in the mountainous border regions of the Czech Republic

Environmental Science and Pollution Research - Arsenic (As) concentrations and deposition fluxes were measured in snow and rime at 10 mountain-top sites near the borders between the Czech Republic...     

Is ionizing radiation effective in removing pharmaceuticals from wastewater?

Environmental Science and Pollution Research - Wastewater and effluent discharges are the main causes of receiving water body pollution and important challenges in water quality management. Among...     

不同横截面形状异形纤维捕集颗粒物的数值模拟

基于离散相模型(DPM),模拟研究了不同横截面形状异形纤维在拦截和惯性碰撞2种机制下对颗粒物的捕集效率;考察了颗粒物粒径、入口风速、纤维填充率和纤维放置方式对不同横截面形状异形纤维捕集颗粒物效率的影响.结果 表明,当颗粒物粒径为0.5～2.5 μm,入口风速为0.5m·s-1时,异形纤维对颗粒物的捕集效率随粒径的增加而...     

Detailed Ecological Footprint Accounting of Liaoning in 2006

Ecological footprint （EF） has received considerable attention as a useful indicator in the context of sustainable development. So far, EF has been used in numerous studies by academies, organizations and government authorities. However, the results of these studies failed to be comparable directly with each other due to imprecise data sets, unmodified accounting methods of pasture and fossil energy, ignored secondary products, undefined process Of calculating yield factors and improper biocapacity for biodiversity. In this paper, we elaborated on EF estimating methods from six categories of consumption in order to overcome the limitations above. We adopted precise data and revised methods, calculated EF of some secondary products, introduced weighted factor to calculate yield factors and adjusted biocapacity by an appropriate amount. Meanwhile, we investigated the resource consumption of Liaoning Province in 2006 to assess EF. Its results showed that Liaoning Province overused its natural capital and was in an unsustainable state. We concluded that two specific problems that had arisen in EF assessment and gave some suggestions for Liaoning Province to improve its unsustainable state.     

Assessment of tin and butyltin species in estuarine superficial sediments from Gipuzkoa,Spain

Ten superficial sediments from river estuaries of Gipuzkoa (North Spain) were collected and analyzed for nine metals (including tin, Sn) and butyltin compounds (monobutyltin, MBT; dibutyltin, DBT; tributyltin, TBT). Total metal concentration in the fine fraction (<63 micrometer) of the sediment was determined in aqua regia--hydrofluoric acid extracts by atomic absorption spectrometry. The butyltin species (BTs) were firstly extracted from the sediments with hydrochloric acid-methanol mixture. After derivatization with sodium tetraethyl borate, the organotin compounds were extracted by solid phase microextraction (SPME) in headspace mode. A fiber coated with 100 micrometer poly(dimethylsiloxane) was used for SPME. The organotin species were analyzed by gas chromatography-flame ionization detection. Analysis of the certified reference sediment (PACS-2) shown the suitability of the procedures for determination of metal contents and DBT-TBT species in contaminated sediments. Factorial analysis was used to examine the main sources of metals. Three factors represented more than 89% of the total variance of the metal system, and the Sn was related with Cu-Zn-Pb suggesting the same pollution source. The BTs concentrations in the area were high (TBT ranged from 0.05 to 5.48 mg Sn kg(-1)). The percentage of total butyltin species ( summation operator BTs) respect to the total Sn amount was higher than 4% in all the sediments, showing in the Bidasoa river estuary a remarkable value higher than 20%. Hence, the studied estuarine sediments reflect a pollution that is related with historical industrial and fishing activities of the area.     

Evaluation of boron removal from water by hydrotalcite-like compounds

Layered double hydroxides (LDHs) or hydrotalcite (HT)-like compounds with different kinds of metal ions (Mg-Al and Mg-Fe) in the brucite-like sheets were prepared and their adsorption properties were studied in the boron removal from aqueous solution under laboratory conditions. The hydrotalcites were synthesized by the coprecipitation method and were characterized by chemical analyses, X-ray diffraction (XRD), Fourier Transform infrared spectroscopy (FTIR) and specific surface area measurements (BET). The affinity of these materials with a mixture of B(OH)(3) and B(OH)(4)(-) was studied as a function of contact time, initial pH of the solutions, HT quantity and B concentration (adsorption isotherms). It was found that 120 min is enough time for the equilibrium state to be reached in boron adsorption. Boron removal was independent of the initial pH of the solutions because of the high buffering capacity of the LDHs. On the other hand, the adsorption capacity increases with increasing the adsorbent quantity. The adsorption isotherms, described by the Langmuir model, are of L-type, suggesting that B(OH)(4)(-) is adsorbed preferentially on HT-like materials. Besides, Mg-Al hydrotalcites showed higher adsorption capacity than Mg-Fe. We proposed that in Mg-Al hydrotalcites, the boron removal occurs by both adsorption on external surface and ion exchange, whereas for Mg-Fe it occurs only by surface adsorption. After treatment of a solution containing 5.2 mgBl(-1) with Mg-Al hydrotalcites the final boron concentration reached the recommended limit by WHO for drinking water (0.5 mgl(-1)).     

Reductive dehalogenation of tetrabromobisphenol-A by sediment from a contaminated ephemeral streambed and an enrichment culture

This study was aimed at improving our understanding of the physiology of the microorganisms that reductively dehalogenate tetrabromobisphenol-A (TBBPA). Activity was followed in contaminated sediments from a polluted streambed as well as from fracture filling material underlying the stream. Reductive dehalogenation was observed in surface sediments but not in fracture filling samples from a depth of 3m. Likewise, anaerobic microbial activity, represented by sulphate reduction, was much higher in the surface sediment. In the culture enriched from the surface sediment, optimal microbial debromination of TBBPA took place at a salinity of 2% and 3% NaCl, temperature of 30 degrees Celsius, and pH of 7-8. Ethanol, pyruvate and the combination of hydrogen with acetate were the most suitable electron donors and carbon sources for this culture. Alternative electron acceptors like Fe(3+), SO(4)(2-), SO(3)(2-), NO(3)(-) and 2,4,6-tribromophenol inhibited TBBPA debromination. The debrominating bacteria were heat sensitive (80 degrees Celsius, for 10min) but were not inhibited by bromoethanesulphonate or molybdate. This study allowed optimisation of our culturing conditions, but was also important for understanding the factors which influence TBBPA debromination in situ.     

Dissolution behavior of nutrient elements from dephosphorization slag in the weakly acidic solution

Journal of Material Cycles and Waste Management - Dephosphorization slag is primarily composed of CaO–SiO2–FeO–P2O5 slag system. As it contains abundant valuable components,...