农药厂周边有机磷农药在生物体中残留的检测方法研究

对中美两国固定源测试技术体系进行总结并按照辅助类参数、烟气类污染物、烟尘类污染物、有机类污染物、元素及卤化物、在线监测规范进行分类并比较,指出两国测试体系的异同。结合目前形势指出中国烟尘、烟气及VOCs类污染物监测体系面临问题并提出建议。     

Quantification of energy related industrial eco-efficiency of China

Improving eco-efficiency is propitious for saving resources and reducing emissions, and has become a popular route to sustainable development. We define two energy-related eco-efficiencies: energy efficiency (ENE) and greenhouse gas (GHG) emission-related eco-efficiency (GEE) using energy consumption and the associated GHG emissions as the environmental impacts. Using statistical data, we analyze China??s energy consumption and GHG emissions by industrial subsystem and sector, and estimate the ENE and GEE values for China in 2007 as 4.871×10⁷ US$/PJ and 4.26×10⁸ US$/TgCO₂eq, respectively. Industry is the primary contributing subsystem of China??s economy, contributing 45.2% to the total economic production, using 79.6% of the energy consumed, and generating 91.4% of the total GHG emissions. We distinguish the individual contributions of the 39 industrial sectors to the national economy, overall energy consumption, and GHG emissions, and estimate their energyrelated eco-efficiencies. The results show that although ferrous metal production contributes only 3.5% to the national industrial economy, it consumes the most industrial energy (20% of total), contributes 16% to the total industrial global warming potential (GWP), and ranks third in GHG emissions. The power and heat sector ranks first in GHG emissions and contributes one-third of the total industrial GWP, although it only consumes about 8% of total industrial energy and, like ferrous metal production, contributes 3.5% to the national economy. The ENE of the ferrous metal and power and heat sectors are only 8 and 2.1×10⁷ US$/PJ, while the GEE for these two sectors are 9 and 4×10⁴ US$/GgCO₂eq, respectively; these are nearly the lowest ENE and GEE values among all 39 industry sectors. Finally, we discuss the possibility of ecoefficiency improvement through a comparison with other countries.     

催化铁应用于草甘膦废水处理工艺改造的可行性研究

针对某化工厂草甘膦废水经厌氧-好氧生物处理后出水总磷浓度高,无法达到该化工区污水纳管标准的情况,应用催化铁方法对该废水现有处理工艺进行改造以提高出水水质。考察了催化铁方法对原处理工艺不同处理工段出水中磷的去除效果,发现该法可有效地去除生物厌氧池出水的总磷及正磷盐,去除率分别达到52．7％和83．13％以上,且使废水的BOD5／COD值显著提高,可从0．08提高至0．31,增强了废水的可生物降解性,有利于后续好氧生物处理的进行。研究表明在原处理工艺的厌氧池后增加催化铁处理段能明显提高最终出水水质。     

石化废水深度处理用臭氧催化氧化体系的研究＊

文章就臭氧催化氧化体系在石化废水处理中的作用进行了深入研究,对催化剂载体、催化剂配伍体系以及臭氧的投加方式进行了优化筛选。根据实验,多元催化掺杂体系较一元催化体系氧化效果好,CODCr的去除率可由一元催化时的20%提高到多元催化时的33%;在臭氧的投加方式上,分段投加要优于单级投加,臭氧投加分配比例为6∶3∶1时,CODCr的去除率可由单一投加时的9%提高到分级投加时的19%。     

河北省县域可持续发展评价指标体系的建立与应用研究

以可持续发展相关理论为基础,利用系统工程的理论和方法建立了河北省县域可持续发展指标体系及其评价标准,并在全省范围应用,对全省136个县(市)可持续发展能力做出了评价。结合评价结果,阐述了河北省县域可持续发展能力的特征,提出了河北省县域可持续发展的方向和思路。     

影响柴油在土壤中挥发的因素

石油污染物进入土壤中后经历一系列物理化学和生物过程,其中发生的挥发过程是一种重要的迁移过程。本文以柴油为石油污染物的代表,研究了温度及土壤质地对柴油挥发行为的影响。通过在不同温度下纯柴油的挥发及柴油从四种不同土质的薄层土壤中的挥发试验,对柴油的挥发量与挥发时间的关系进行了模拟,结果表明:在不同温度下,纯柴油及柴油在四种薄层土壤中的挥发量与挥发时间的关系均可采用二次多项式来拟合。通过对比经相近时间柴油从4种不同土壤表面的挥发后,发现柴油挥发量均大于从纯柴油时的挥发量。在有机质质量分数不同的土壤中进行了柴油挥发试验,结果表明高有机质会抑制土壤中的柴油的挥发。     

pH、溶解氧、叶绿素a之间相关性研究Ⅱ：非养殖水体

利用国内、外近20年的资料和饮用水水源地潘家口水库现场围隔实验结果,分析非养殖水体中pH、溶解氧（DO）和叶绿素a之间的相互关系。结果表明,当水体处于富营养化状态即叶绿素a平均含量高于10μg/L时,pH、DO与叶绿素a呈显著正相关。当叶绿素a平均含量低于10μg/L时,水体交换强或有机重污染的天然水体中DO与叶绿素a...     

Particulate air pollution from combustion and construction in coastal and urban areas of China

In China, the areas that are undergoing rapid urban growth are faced with increasingly more complicated air pollution problems. Sources of air pollution need to be identified and their contributions quantified. In this study, PM2.5 (particulate matter with aerodynamic diameters < or =2.5 microm), PM2.5-10 (particulate matter with aerodynamic diameters 2.5-10 microm), organic carbon (OC), and elemental carbon (EC) concentrations were measured from April to July 2009 at four selected areas in Xiamen (the downtown area, an industrial park, a suburb, and one remote site). The contributions of carbonaceous aerosols to PM2.5 and PM2.5-10 were 20-30% and 10-20%, respectively, indicating that finer particles contained more carbonaceous aerosols. The EC concentrations in PM2.5 at the downtown, industrial, suburb, and remote sites were 2.16 +/- 0.61, 2.05 +/- 0.45, 1.69 +/- 0.54, and 0.65 +/- 0.43 microg m-3, respectively, showing a decrease from the urban and industrial hotspots to the surrounding areas. These data show that carbonaceous aerosols emitted from the combustion of fossil fuels in urban and industrial hotspots influence air quality at the regional scale. Higher levels of PM2.5 and PM2.5-10 were observed at the suburb site compared to the urban and industrial sites. Peak EC concentrations in PM2.5 were observed during the morning and evening rush hours. However, peak PM2.5 levels at the suburb site were observed around noon, which coincides with construction work hours, instead of the morning and evening rush hours when emissions from combustion dominated. These findings indicate that both fuel combustion and construction have exacerbated air pollution in coastal and urban areas in China.     

The presence of Bacillus thuringiensis (Bt) protein in earthworms Eisenia fetida has no deleterious effects on their growth and reproduction

Earthworms Eisenia fetida, bred in substances with stover of two genetically-engineered Bacillus thuringiensis (Bt) corns (5422Bt1 (Event Bt11) and 5422CBCL (MON810)) expressing Cry1Ab and their near-isogenic non-Bt corn (5422), were used to investigate the non-target effects of Bt corn on soil-dwelling organisms. Cry1Ab concentrations in substances, casts and guts of E. fetida were also investigated by Enzyme-linked immunosorbent assay (ELISA). More than 90% individuals of E. fetida survived over a period of 30 d, irrespective of whether they received Bt corn or non-Bt corn. Compared to 5422 treatments, significantly higher relative growth rate and more number of new offspring and cocoons of E. fetida were found in 5422Bt1 and 5422CBCL treatments. These results were unlikely to be directly caused by Cry1Ab released from Bt corns but rather by differences in other factors of plants such as plant components (soluble sugar, total organic carbon, total protein and available phosphorus of Bt corns were more than 5422). ELISA results indicated immunoreactive Cry1Ab was detectable in substances, and the casts, guts of E. fetida from Bt corns treatments, of which the highest levels were detected in substances under the corresponding experimental conditions. With the increase of treated time, a strong decline was observed in Cry1Ab from substances and casts of E. fetida, whereas Cry1Ab in guts of E. fetida from 5422Bt1 treatments gradually increased and that from 5422CBCL treatments increased between 14 and 30 d. Therefore, the presence of Cry1Ab in E. fetida had no deleterious effects on their growth and reproduction.     

Optimizing Cr(VI) adsorption on activated carbon produced from heavy oil fly ash

In order to explore the beneficial utilization of heavy oil fly ash (HOFA) generated in the power plants, the present study is intended to optimize the chromium(VI) [Cr(VI)] adsorption on activated carbon produced from HOFA. The raw HOFA obtained from a power plant was washed by nitric/hydrochloric acid and activated at 800 °C with a holding time of 60 min to produce fly ash activated carbon (FAC). Phosphoric acid was used as a chemical agent to improve the surface characteristics of the HOFA during the activation process. Batch adsorption experiments were employed to evaluate the effects of different parameters such as initial Cr(VI) concentration, pH, and FAC dose on the removal of Cr(VI) from aqueous solution. A total of 17 adsorption experimental runs were carried out employing the detailed conditions followed the response surface methodology based on the Box–Behnken design. The results indicate that developed FAC has the potential for removing Cr(VI) from wastewater. Under the test conditions, a maximum of 91.51 % Cr(VI) removal efficiency was achieved.