The selective catalytic reduction of NO over Ce0.3TiOx-supported metal oxide catalysts

A Ce_(0.3)TiO_xoxide carrier was synthesized via a sol–gel process,and Ce_(0.3)TiO_xsupported metal(M=Cd,Mn,Fe,W,Mo)oxide catalysts were prepared by the method of incipient-wetness impregnation.The catalysts were characterized by means of X-ray diffraction(XRD),Brunauer–Emmett–Teller(BET)analysis,scanning electron microscopy(SEM),transmission electron microscopy(TEM),Fourier transform infrared(FT–IR)spectroscopy,UV–Visdiffusereflectancespectroscopy(UV–VisDRS),and Temperature-programmed reduction with H_2(H_2-TPR).The catalytic activities for de-NO_(x )were evaluated by the NH_3-SCR reaction.Among all the catalysts tested,the 2 wt.%Cd/Ce_(0.3)TiO_xcatalyst exhibited the best NH_3-SCR performance,with a wide temperature window of 250–450°C for NO conversion above 90%.Moreover,the catalyst showed N_2 selectivity greater than 99%from 200 to 450°C.     

活性污泥胞外聚合物提取方法优化

试验对比了不同离子交换树脂(CER)含量和pH条件下胞外聚合物(EPS)的提取效果差异。结果表明,EPS各组分提取浓度均随离子交换树脂用量增加而增加,但各组分趋势不同。TOC的最佳树脂剂量为100 g CER/g VSS,而蛋白质、多糖和DNA的最佳树脂剂量约为70 g CER/g VSS。pH值对TOC、DNA和多糖的提取浓度影响较小,但对蛋白质影响比较大。各提取条件下,EPS各组分提取浓度随时间的变化过程可以分为平稳增长期、快速增长期及稳定期。     

石化企业储罐大呼吸损耗影响因素的分析

储罐是石化行业挥发性有机物(VOCs)无组织排放源的重要组成部分。采用美国环保署推荐的储罐VOCs排放量计算公式,以云南某炼化企业的典型热渣油立式固定顶罐以及北京某石化企业的汽油外浮顶罐和甲苯内浮顶罐为基准案例进行储罐大呼吸损耗量的计算,考察了其影响因素,总结出影响储罐大呼吸损耗的关键参数,并有针对性地提出降耗措施。结果表明:影响固定顶罐大呼吸损耗的关键参数为气相分子摩尔质量、日平均液体表面温度和年周转量;影响外浮顶罐大呼吸损耗的首要关键参数为罐壁黏附系数,其次为年周转量和有机液体的密度;影响内浮顶罐大呼吸损耗的首要关键参数为罐壁黏附系数,其次为年周转量和固定顶支撑柱数量。     

中国排污许可证制度执行现状调查

本研究以广州、石家庄、兰州、哈尔滨和大同5个城市为调研对象,收集各城市20年来许可证相关的法规制度,并与各城市环境保护监管部门负责人及典型企业环保专职人员进行了访谈。研究表明,中国排污许可证制度在提高企业环保守法意识和推动总量减排上起到了明显作用,但也面临着法律体系不完善,行政资源不足、排放量核算方法不明确、处罚力度弱以及公众参与不充分等问题。在此基础上,本研究提出中国排污许可证制度的改进建议,为决策部门制定相应的政策提供科学和技术的支撑。     

岩体裂隙面形貌特征对其渗流特性的影响研究∗

岩体裂隙面的形貌特征直接影响其渗流特性,为了分析二者的相关关系,采用劈裂法制备了单裂隙砂岩试样,进行了裂隙面扫描分析和渗流试验,基于分形维数在定量表达不规则曲线形貌特征方面的优势,提出了考虑裂隙面形貌各向异性特征的分形维数计算方法。研究结果表明:(1)基于矩阵理论的裂隙面综合分形维数,相当于用矩阵网格去覆盖整个裂隙面,可以较好地反映裂隙面的整体形貌特征;(2)裂隙面的形貌特征对其渗流特性影响显著,随着裂隙面综合分形维数逐渐增大,裂隙岩体的渗透系数逐渐减小,而且侧向应力越大,渗透系数的减小趋势越明显;(3)分析建立了裂隙岩样渗透系数kf与裂隙面综合分形维数■的相关关系,验证分析表明,该公式计算得到的裂隙岩样渗透系数与试验结果吻合较好。相关研究成果可为裂隙岩体渗流特性分析提供参考。     

岩石冻融风化作用积累泥石流物源试验研究

风化作用导致地表岩石的破碎,是泥石流固体物质的主要来源之一。研究岩石风化作用对于研究高原泥石流物源的积累效应和泥石流的形成机理具有重要意义。在高寒地区,地表岩石以物理风化为主。温度和水分的变化是物理风化作用的主要原因。该文选择青海省玉树州泥质砂岩,分6级不同含水率,分别开展了循环10次、20次、40次、60次、80次冻融试验,并对冻融岩样进行纵波波速测量、CT扫描和抗拉强度测量,横向比较岩石的风化程度。通过试验得出不同含水率条件下,随着冻融循环次数的增加,岩样的纵波波速、CT数和抗拉强度都呈减小的趋势。综合分析认为温差作用和冰劈效应在高寒地区岩石风化中的主要地质作用。在干燥条件下,温差作用更加明显。在含水条件下,温差风化和冰劈作用同时存在,相互促进。     

Removal of arsenate with hydrous ferric oxide coprecipitation：Effect of humic acid

Insights from the adverse effect of humic acid(HA) on arsenate removal with hydrous ferric oxide(HFO) coprecipitation can further our understanding of the fate of As(V) in water treatment process. The motivation of our study is to explore the competitive adsorption mechanisms of humic acid and As(V) on HFO on the molecular scale. Multiple complementary techniques were used including macroscopic adsorption experiments, surface enhanced Raman scattering(SERS), extended X-ray absorption fine structure(EXAFS) spectroscopy, flow-cell attenuated total reflectance Fourier transform infrared(ATR-FTIR) measurement, and charge distribution multisite complexation(CDMUSIC) modeling. The As(V) removal efficiency was reduced from over 95% to about 10% with the increasing HA concentration to 25 times of As(V) mass concentration. The SERS analysis excluded the HA-As(V) complex formation. The EXAFS results indicate that As(V) formed bidentate binuclear surface complexes in the presence of HA as evidenced by an As-Fe distance of 3.26–3.31 ?. The in situ ATR-FTIR measurements show that As(V) replaces surface hydroxyl groups and forms innersphere complex. High concentrations of HA may physically block the surface sites and inhibit the As(V) access. The adsorption of As(V) and HA decreased the point of zero charge of HFO from 7.8 to 5.8 and 6.3, respectively. The CD-MUSIC model described the zeta potential curves and adsorption edges of As(V) and HA reasonably well.     

Heterogeneous Fenton-like degradation of 4-chlorophenol using iron/ordered mesoporous carbon catalyst

Ordered mesoporous carbon supported iron catalysts(Fe/OMC) were prepared by the incipient wetness impregnation method and investigated in Fenton-like degradation of 4-chlorophenol(4CP) in this work. XRD and TEM characterization showed that the iron oxides were well dispersed on the OMC support and grew bigger with the increasing calcination temperature. The catalyst prepared with a lower calcination temperature showed higher decomposition efficiency towards 4CP and H2O2, but more metals were leached. The effect of different operational parameters such as initial pH, H2O2 dosage, and reaction temperature on the catalytic activity was evaluated. The results showed that 96.1% of 4CP and 47.4% of TOC was removed after 270 min at 30°C, initial pH of 3 and 6.6 mmol/L H2O2. 88% of 4CP removal efficiency was retained after three successive runs, indicating Fe/OMC a stable catalyst for Fenton reaction. 4CP was degraded predominately by the attack of hydroxyl radical formed on the catalyst surface and in the bulk solution due to iron leaching. Based on the degradation intermediates detected by high performance liquid chromatography, possible oxidation pathways were proposed during the 4CP degradation.     

Biogenic C-doped titania templated by cyanobacteria for visible-light photocatalytic degradation of Rhodamine B

Cyanobacteria, which occurred in eutrophic water harvest solar light to carry out photosynthesis with high efficiency. In this work, cyanobacteria （Microcystis sp.） were used as biotemplate to synthesize titania structure. The synthesized titania sample had similar morphology to that of the original template in spite of the fragile unicellular structures and extremely high water content of cyanobacterial cells. Incorporation of biogenic C, as well as the morphology inherited from biotemplate improved visible- light absorbance of the titania structure. The sample exhibited higher visible-light photocatalytic activity than commercial titania photocatalyst Degussa P25 for Rhodamine B （RhB） degradation. Compared with those C-doped titania photocatalysts prepared by other methods, cyanobacteria templated titania photocatalyst offer some potential for competitive advantages. The reported strategy opened up a new use for the cyanobacteria. It could also be used for titania in applications such as treatment of polluted water, dye-sensitized solar cells, or other regions.     

膜生物反应器中膜过滤特征及膜污染机理的研究

以膜生物反应器处理市政污水,通过对活性污泥进行终端过滤来反映膜污染机理,实验表明,最初很短时间内膜污染受膜孔堵塞模型控制,之后受沉积层阻力模型控制,后一阶段是膜污染的主要控制阶段;膜的相对通量随过滤时间呈指数衰减趋势,压力越大,通量衰减越快;污泥沉积层存在压密过程,这一过程中的污泥比阻随压力增大而增大,并得到处理市政污水的污泥压密指数为0.807 8;阻力分布实验表明沉积层阻力占总阻力的90%以上,是膜过滤污染阻力的主要组成部分;活性污泥各组分对膜污染均有贡献,其中悬浮固体、胶体颗粒和溶质产生的阻力分别占87.98%、6.20%和5.82%;根据实验和计算结果,探讨了MBR处理市政污水过程中可能的膜污染机理.