On the implementation of an International Curriculum on Hydrogen Safety Engineering into higher education

This paper describes the implementation of an International Curriculum on Hydrogen Safety Engineering into higher education. The curriculum is being developed as part of the educational and training activities of the European Network of Excellence Safety of Hydrogen as an Energy Carrier (HySafe) and has been implemented into a 1-year Postgraduate Certificate Course in Hydrogen Safety Engineering by the University of Ulster. The course is taught in the distance learning mode and comprises of two 30 CATS-point modules, namely, ‘Principles of Hydrogen Safety’ and ‘Applied Hydrogen Safety’. The first delivery of this course began in January 2007 and the second delivery will commence in September 2007.     

Effects of bed materials on the performance of an anaerobic sequencing batch biofilm reactor treating domestic sewage

The objective of this study was to determine the best performance of an anaerobic sequencing batch biofilm reactor (AnSBBR) based on the use of four different bed materials as support for biomass immobilization. The bed materials utilized were polyurethane foam (PU), vegetal carbon (VC), synthetic pumice (SP), and recycled low-density polyethylene (PE). The AnSBBR, with a total volume of 7.2L, was operated in 8-h batch cycles over 10 months, and fed with domestic sewage with an average influent chemical oxygen demand (COD) of 358+/-110mg/L. The average effluent COD values were 121+/-31, 208+/-54, 233+/-52, and 227+/-51mg/L, for PU, VC, SP, and PE, respectively. A modified first-order kinetic model was adjusted to temporal profiles of COD during a batch cycle, and the apparent kinetic constants were 0.52+/-0.05, 0.37+/-0.05, 0.80+/-0.04, and 0.30+/-0.02h(-1) for PU, VC, SP, and PE, respectively. Specific substrate utilization rates of 1.08, 0.11, and 0.86mg COD/mgVS day were obtained for PU, VC, and PE, respectively. Although SP yielded the highest kinetic coefficient, PU was considered the best support, since SP presented loss of chemical constituents during the reactor's operational phase. In addition, findings on the microbial community were associated with the reactor's performance data. Although PE did not show a satisfactory performance, an interesting microbial diversity was found on its surface. Based on the morphology and denaturing gradient gel electrophoresis (DGGE) results, PE showed the best capacity for promoting the attachment of methanogenic organisms, and is therefore a material that merits further analysis. PU was considered the most suitable material showing the best performance in terms of efficiency of solids and COD removal.     

Matrix based fertilizers reduce nitrogen and phosphorus leaching in three soils

We compared the efficacy of matrix based fertilizers (MBFs) formulated to reduce NO3-, NH4+, and total phosphorus (TP) leaching, with Osmocoate 14-14-14, a conventional commercial slow release fertilizer (SRF) and an unamended control in three different soil textures in a greenhouse column study. The MBFs covered a range of inorganic N and P in compounds that are relatively loosely bound (MBF 1) to more moderately bound (MBF 2) and more tightly bound compounds (MBF 3) mixed with Al(SO4)3H2O and/or Fe2(SO4)3 and with high ionic exchange compounds starch, chitosan and lignin. When N and P are released, the chemicals containing these nutrients in the MBF bind N and P to a Al(SO4)3H2O and/or Fe2(SO4)3 starch-chitosan-lignin matrix. One milligram (8000 spores) of Glomus intradices was added to all formulations to enhance nutrient uptake. In all three soil textures the SRF leachate contained a higher amount of NH4+, NO3- and TP than leachate from all other fertilizers. In all three soils there were no consistent differences in the amount of NH4+, NO3- and TP in the MBF leachates compared to the control leachate. Plants growing in soils receiving SRF had greater shoot, root and total biomass than all MBFs regardless of Al(SO4)3H2O or Fe2(SO4)3 additions. Arbuscular mycorrhizal infection in plant roots did not consistently differ among plants growing in soil receiving SRF, MBFs and control treatments. Although the MBFs resulted in less plant growth in this experiment they may be applied to soils growing plants in areas that are at high risk for nutrient leaching to surface waters.     

Assessment of chemical, biochemical and ecotoxicological aspects in a mine soil amended with sludge of either urban or industrial origin

A greenhouse pot experiment was conducted to evaluate the effect of sewage sludge (SS), of sugar beet sludge (SBS), or of a combination of both, in the remediation of a highly acidic (pH 3.6) metal-contaminated soil, affected by mining activities. The SS was applied at 100 and 200 Mg ha(-1) (dry weight basis), and the SBS at 7 Mg ha(-1). All pots were sown with Italian ryegrass (Lolium multiflorum Lam.). After 60 d of growth, shoot biomass was quantified and analysed for Cu, Pb and Zn. The pseudo-total and bioavailable contents of Cu, Pb and Zn and the enzymatic activities of beta-glucosidase, acid phosphatase, cellulase, protease and urease were determined in the soil mixtures. Two indirect acute bioassays with leachates from the soil (luminescent inhibition of Vibrio fischeri and Daphnia magna immobilization) were also used. The SS, in particular when in combination with SBS, corrected soil acidity, while increasing the total organic matter content and the cation exchange capacity. The application of SS led to a decrease in the level of effective bioavailable metals (extracted by 0.01 M CaCl(2), pH 5.7, without buffer), but caused an increase in their potential bioavailability (extracted by a solution of 0.5M NH(4)CH(3)COO, 0.5 M CH(3)COOH and 0.01 M EDTA, pH 4.7). Plant biomass increased more than 10 times in the presence of 100 Mg SS ha(-1), and more than five times with the combined use of 100 Mg SS ha(-1) and SBS, but a considerable phytotoxic effect was observed for the application rate of 200 Mg SS ha(-1). Copper, Pb and Zn concentrations in the shoots of L. multiflorum decreased significantly when using 100 Mg SS ha(-1) or SBS. The activities of beta-glucosidase, urease and protease increased with increasing SS applications rates, but cellulase had a reduced activity when using 200 Mg ha(-1)SS. Both amendments were able to suppress soil toxicity to levels that did not affect D. magna, but increased the soil leachate toxicity towards V. fischeri, especially with the application of 200 Mg SS ha(-1). This study showed that for this type of mine soils, and when using SS of similar composition, the maximum SS application rate should be 100 Mg ha(-1), and that liming the SS amended soil with SBS did not contribute to a further improvement in soil quality.     

Spatial trends of polyfluorinated compounds in guillemot (Uria aalge) eggs from North-Western Europe

Polyfluorinated alkyl compounds (PFCs) are a group of chemicals of growing concern that have been detected in biological and abiotic samples worldwide. This study reports the concentrations of a suite of PFCs: perfluorooctyl sulfonate (PFOS), perfluorooctyl sulfonamide (PFOSA) and perfluorinated carboxylic acids (PFCAs) in guillemot (Uria aalge) eggs, collected in North-Western Europe, from Iceland, the Faroe Islands, Sweden and two locations in Norway. The highest concentrations of PFOS were found in samples from Sweden (mean 400 ng g(-1) wet weight (w.w.)), which were almost five times higher than concentrations found in Norwegian samples (mean 85 ng g(-1)w.w. from both sample sites). The concentrations found in Icelandic and Faroe samples were lowest (mean 16 and 15 ng g(-1)w.w., respectively). Only Swedish samples differed significantly from the other locations. In general, PFCAs show a different spatial trend than PFOS. Perfluorooctanoic acid (PFOA) was not detected in any sample and perfluorononanoic acid (PFNA) was only detected in samples from Sweden. The most abundant PFCA was perfluoroundecanoic acid (PFUA) with highest concentrations in samples from Sweden (mean 82 ng g(-1)w.w.), samples from the Faroe Islands had the second highest concentration (mean 57 ng g(-1)w.w.) and samples from Iceland and Norway had concentrations ranging between 18 and 30 ng g(-1)w.w. The original hypothesis was based on the idea that PFC concentrations are the highest close to more densely populated and industrialized areas and lower levels in remote areas. However, the geographic pattern is more complicated than predicted and varies among different PFCs.     

The effect of nitroaromatics' composition on their toxicity in vivo: novel, efficient non-additive 1D QSAR analysis

Novel 1D QSAR approach that allows analysis of non-additive effects of molecular fragments on toxicity has been proposed. Twenty-eight nitroaromatic compounds including some well-known explosives have been chosen for this study. The 50% lethal dose concentration for rats (LD50) was used as the estimation of toxicity in vivo to develop 1D QSAR models on the framework of Simplex representation of molecular structure. The results of 1D QSAR analysis show that even the information about the composition of molecules provides the main trends of toxicity changes. The necessity of consideration of substituents' mutual impacts for the development of adequate QSAR models of nitroaromatics' toxicity was demonstrated. Statistic characteristics for all the developed partial least squares QSAR models, except the additive ones are quite satisfactory (R2=0.81-0.92; Q2=0.64-0.83; R2 test=0.84-0.87). A successful performance of such models is due to their non-additivity i.e. possibility of taking into account the mutual influence of substituents in benzene ring which plays the governing role for toxicity change and could be mediated through the different C-H fragments of the ring. The correspondence between observed and predicted by these models toxicity values is good. This allowing combine advantages of such approaches and develop adequate consensus model that can be used as a toxicity virtual screening tool.     

Changes in sewage sludge carbon forms along a treatment stream

The behaviour and fate of macronutrients and pollutants in sewage sludge applied to the land are affected by the chemical composition of the sludge organic matter, which in turn is influenced by both sewage source and by sewage treatment processes. In this study, (13)C nuclear magnetic resonance (NMR) spectroscopy was used to characterise the organic matter of sludges collected at three different points along the treatment stream of a municipal sewage works with a domestic catchment. Sludge at the first point, an undigested liquid (UL) sludge, had a substantially different composition to the anaerobically digested (AD) and dewatered sludge cake (DC) materials, which were similar to each other. In particular, the UL sludge contained more alkyl C than the AD or DC sludges. All three sludges were found to contain mobile alkyl C that is poorly observed using the cross polarisation (CP) technique, necessitating the use of the less sensitive, but more quantitatively reliable direct polarisation (DP) technique to obtain accurate distributions of C types.     

Synthesis and analytical follow-up of the mineralization of a new fluorosurfactant prototype

Fluorinated surfactants have become essential in numerous technical applications due to their unparalleled effectiveness and efficiency. The environmental persistence of the non-biodegradable perfluorinated alkyl moiety has become a matter of concern. Therefore, it was searched for new molecules with chemically stable fluorinated end groups which can be microbially transformed into labile fluorinated substances. One prototype substance, 10-(trifluoromethoxy)decane-1-sulfonate, has shown biomineralization. Monitoring the formation of metabolites over time elucidated the mechanism of biotransformation. Analysis was performed utilizing liquid chromatography-single quadrupole mass spectrometry (LC-MS) and quadrupole-time of flight tandem mass spectrometry (QqTOF-MS). It was possible to distinguish between two major degradation pathways of the fluorinated alkylsulfonate derivative: (i) a desulfonation and subsequent oxidation and degradation of the alkyl chain being predominant and (ii) an insertion of oxygen with a subsequent cleavage and degradation of the molecule. The utilized trifluoromethoxy-endgroup resulted in instable trifluoromethanol after degradation of the alkyl chain, which led to a high degree of mineralization of the molecule.     

Sorption of copper, zinc and lead on soil mineral phases

Soil mineral phases play a significant role in controlling heavy metal mobility in soils. The effective study of their relation needs the integrated use of several analytical methods. In this study, analytical electron microscopy analyses were combined with sequential chemical extractions on soils spiked with Cu, Zn and Pb. Our aims were to study the metal sorption capacity of soil mineral phases and the effect of presence of iron oxide and carbonate on this property of soil minerals. Copper and Pb were found to be characterized by higher and stronger sorption on the studied samples than Zn. Only the former two metals showed significant differences in their immobilized metal amounts on the studied samples and soil mineral particles. Highest metal amounts were sorbed on the swelling clay mineral particles (smectites and vermiculites), but iron-oxide phases may also have similar lead sorption capacity. Alkaline conditions due to the carbonate content of soils resulted both in increased sorption on the mineral particles for Cu and in enhanced role of precipitation for all the studied metals. On the other hand, the intimate association of phyllosilicates and iron resulted in significant increase in metal sorption capacity of the given particle. The results of sequential extractions could be successfully completed by the analytical electron microscopy analyses for studying the sorption capacity of discrete mineral particles. Their integrated use helps us in better understanding the heavy metal-mineral interactions in soils.     

Dairy washwater treatment using a horizontal flow biofilm system

In Ireland, dairy farmyard washwater commonly comprises farmyard run-off and dairy parlour washings. Land-spreading is the most widely used method for treating this wastewater. However, this method can be labour intensive and can cause, in some cases, the degradation of surface and ground waters, mainly due to nitrogen contamination. In this study, a horizontal flow biofilm reactor (HFBR) with step-feed was constructed and tested in the laboratory, to remove organic carbon and nitrogen from a agricultural strength synthetic washwater (SWW). The HFBR had an average top plan surface area (TPSA) of 0.1002 m(2) and consisted of a stack of 45 polystyrene horizontal sheets--15 sheets embedded with 25 mm deep frustums above 30 sheets with 10 mm deep frustums. The frustums acted as miniature reservoirs. The sheets were alternately offset to allow the wastewater to flow horizontally along each sheet and vertically from sheet to sheet down through the reactor. Biofilms developed on the sheets and treated the wastewater. During the 212-d study, the total hydraulic loading rate based on the TPSA of the sheets was 35 l m(-2) d(-1). SWW was pumped for 10 min each hour, in a step feed arrangement at a rate of 23.33 l m(-2) d(-1) on to the top sheet during Phases 1 and 2, and 11.67 l m(-2) d(-1) onto Sheet 16 during Phase 1 (days 1-92) and onto Sheet 30 during Phase 2 (days 93-212). The substrate loading rate during Phases 1 and 2 was 94.8 g total chemical oxygen demand (COD) m(-2) d(-1) and 10.5 g total nitrogen (TN) m(-2) d(-1), based on the TPSA. At steady state in Phase 2, the unit achieved excellent carbon removal of 99.7% 5-day biochemical oxygen demand (BOD(5)) and 96.7% total COD, equivalent to TPSA removal rates of 67.5 g BOD(5)m(-2)d(-1) and 91.7 g COD m(-2) d(-1). The nitrogen removal percentages were 98.3% total ammonium-nitrogen (NH(4)-N(t)) and 72.8% TN, which equated to TPSA removal rates of 4.8 g NH(4)-N(t) m(-2) d(-1) and 7.6g TN m(-2) d(-1). No sloughing of solids or clogging of media occurred during the study. The unit was simple to construct and operate, with little maintenance.