Trace metals in soil and leaves of Jacaranda mimosifolia in Tshwane area,South Africa

Plant and soil have been identified as major sink of pollutants in the environment. We evaluated the reliability of biomonitoring of heavy metals in Tshwane area with the use of leaves of Jacaranda mimosifolia. The concentrations of heavy metals such as Ca, Mg, Fe, Pb, Zn, Cu, Sb were measured in leaves of J. mimosifolia and soils collected from 10 sites in the city of Tshwane during two sampling periods. The metals were analyzed with the use of ICP-MS. The result shows significant differences in the concentration of trace metals in all the sites (p < 0.01). The differences between the two sampling periods were statistically significant (p < 0.01). Concentration of metals from high traffic and industrial sites were significantly higher than in the residential areas (p < 0.01). Concentration factor suggests that translocation of metals from roots to leaves could be relevant only for some metals such as Ca, Mg and Sb. The study reveals an anthropogenic source for the trace metals. Leaves of J. mimosifolia were found to be a useful biomonitor of the determined trace metals.     

Seasonal and diurnal measurements of carbon monoxide and nonmethane hydrocarbons at Mt. Wilson,California: Indirect evidence of atomic Cl in the Los Angeles basin

We present a study of the seasonal and diurnal variability of carbon monoxide and selected volatile organic compounds in the Los Angeles area. Measurements were made during four different nine-day field campaigns in April/May, September, and November, 2007, and February, 2008, at the Mt. Wilson sampling site, which is located at an elevation of approximately 1700 m in the San Gabriel Mountains overlooking Pasadena and the Los Angeles basin. The results were used to characterize the Mt. Wilson site as a representative location for monitoring integrated Los Angeles basin emissions, and, by reference to carbon monoxide emissions, to estimate average annual emissions. The considerable seasonal variability of many hydrocarbons, in both their measured mixing ratios and their relationship to carbon monoxide, was indicative of variable source strengths. Most interestingly, perturbation of C₄ hydrocarbon ratios suggested an enhanced role for chlorine chemistry during the month of September, likely as the result of Los Angeles’ coastal location. Such coastal influence was confirmed by observations of enhanced mixing ratios of marine halocarbons, as well as air mass back trajectories.     

A 3D aerosol and visibility information system for urban areas using remote sensing and GIS

Currently, the depiction of urban air quality at boundary layer scale uses modelled climatic and land cover data. However, such models are difficult to verify, and only low to moderate accuracy may be achieved due to the complexity of the input data required and the reliance on assumptions about dispersion patterns. The provision of comprehensive air quality data to urban residents in city districts, at a level of detail commensurate with other Location-Based Services (LBS) which are time- and place-sensitive, has therefore not been possible. A method for urban air quality monitoring over cities at boundary layer scale, other than by the use of air quality models is presented here. The system presented uses empirical Aerosol Optical Thickness (AOT) data in near-real time, combining AOT data from AERONET with aerosol vertical profiles computed from twice-daily MODIS satellite images at 500 m resolution, to give three dimensional (3D) air quality data over the urban landscape. There has been no previous attempt to project the horizontal spatial distribution of aerosols from satellite image pixels into a vertical dimension to give a spatially comprehensive three dimensional record of air quality. The paper describes the sources and accuracy of the AOT data input to the system as well as its storage and retrieval on a Geographic Information System (GIS) platform, to provide air quality and visibility information according to user query at any 3D geographical location, including individual buildings or building floor.     

The seasonal cycles and photochemistry of C2–C5 alkanes at Mace Head

Continuous in-situ measurements of NMHCs at Mace Head, Ireland during two full annual cycles from January 2005 to January 2007 were used to investigate NMHC emission sources and transport including dilution and photochemical oxidation. The Mace Head research station is ideally located to sample a wide range of air masses including polluted European transport, clean North Atlantic and Arctic air masses and the ultra-clean, Southern Atlantic air masses. The variety in air mass sampling is used to investigate interaction of emissions, transport, dilution and photochemistry. Variability of long-lived hydrocarbon ratios is used to assess and estimate typical transport times from emission source to the Mace Head receptor. Seasonality in the ratios of isomeric alkane pairs (for butane and pentanes) are used to assess the effects of atmospheric transport and photochemical ageing. Finally, the natural logarithms of NMHC ratios are used to assess photochemical oxidation.     

Urban tracer dispersion experiments during the second DAPPLE field campaign in London 2004

As part of the DAPPLE programme two large scale urban tracer experiments using multiple simultaneous releases of cyclic perfluoroalkanes from fixed location point sources was performed. The receptor concentrations along with relevant meteorological parameters measured are compared with a three screening dispersion models in order to best predict the decay of pollution sources with respect to distance. It is shown here that the simple dispersion models tested here can provide a reasonable upper bound estimate of the maximum concentrations measured with an empirical model derived from field observations and wind tunnel studies providing the best estimate. An indoor receptor was also used to assess indoor concentrations and their pertinence to commonly used evacuation procedures.     

Economic damages of ozone air pollution to crops using combined air quality and GIS modelling

This study aims at presenting a combined air quality and GIS modelling methodological approach in order to estimate crop damages from photochemical air pollution, depict their spatial resolution and assess the order of magnitude regarding the corresponding economic damages. The analysis is conducted within the Greater Thessaloniki Area, Greece, a Mediterranean territory which is characterised by high levels of photochemical air pollution and considerable agricultural activity. Ozone concentration fields for 2002 and for specific emission reduction scenarios for the year 2010 were estimated with the Ozone Fine Structure model in the area under consideration. Total economic damage to crops turns out to be significant and estimated to be approximately 43 M€ for the reference year. Production of cotton presents the highest economic loss, which is over 16 M€, followed by table tomato (9 M€), rice (4.2 M€), wheat (4 M€) and oilseed rape (2.8 M€) cultivations. Losses are not spread uniformly among farmers and the major losses occur in areas with valuable ozone-sensitive crops. The results are very useful for highlighting the magnitude of the total economic impacts of photochemical air pollution to the area’s agricultural sector and can potentially be used for comparison with studies worldwide. Furthermore, spatial analysis of the economic damage could be of importance for governmental authorities and decision makers since it provides an indicative insight, especially if the economic instruments such as financial incentives or state subsidies to farmers are considered.     

Towards a long-term integrated monitoring programme in Europe: network design in theory and practice

Long-term integrated monitoring is an important approach forinvestigating, detecting and predicing the effects ofenvironmental changes. Currently, European freshwaters,glaciers, forests and other narural and semi-natural ecosystemsand habitats are monitored by a number of networks establishedby different organisations. However, many monitoring programmeshave a narrow focus (e.g. targeting individual ecosystems) andmost have different measurement protocols and sampling design.This has resulted in poor integration of ecosystem monitoring ata European level, leading to some overlapping of efforts and alack of harmonised data to inform policy decisions. The need fora consistent pan-European long-term integrated monitoring ofterrestrial systems programme is recognised in the scientificcommunity. However, the design of such a system can be problematic, not least because of the constraints imposed bythe need to make maximum use of existing sites and networks.Based on the outcomes of the NoLIMITS project (Networking ofLong-term Integrated Monitoring in Terrestrial Systems), thisarticle reviews issues that should be addressed in designing aprogramme based on existing monitoring sites and networks. Fourmajor design issues are considered: (i) users' requirements,(ii) the need to address multiple objectives, (iii) role ofexisting sites and (iv) operational aspects.     

Mechanistic studies of N-nitrosodimethylamine (NDMA) formation in chlorinated drinking water

Studies were conducted to investigate the hypothesis that N-nitrosodimethylamine (NDMA) is a potential disinfection by-product specifically produced during chlorination or chloramination. Experiments were conducted using dimethylamine (DMA) as a model precursor. NDMA was formed by the reaction of DMA with free chlorine in the presence of ammonia and also with monochloramine. We proposed a mechanism for NDMA formation in chlorinated or chloraminated water, which does not require nitrite as in N-nitrosation. The critical NDMA formation reactions consist of (i) the formation of monochloramine by combination of free chlorine with ammonia, (ii) the formation of 1,1-dimethylhydrazine (UDMH) intermediate from the reaction of DMA with monochloramine followed by, (iii) the oxidation of UDMH by monochloramine to NDMA, and (iv) the reversible chlorine transfer reaction between free chlorine/monochloramine and DMA which is parallel with (i) and (ii). A kinetic model was also developed to validate the proposed mechanism.     

Distribution of Chlorinated Organic Pollutants in Harbor Sediments of Livorno (Italy): A Multivariate Approach to Evaluate Dredging Sediments

Dredging is a very important procedure for harbor management. InItaly the guidelines for the offshore dumping of dredged materials are issued by the Ministry of Environment. Theydescribed a few steps of dredging activities, such as thesampling strategy, but do not deal with limits or guide-valuesfor the chemical, physical and biological composition of theresulting sediments. The quality of dredged materials is mainlydependent on the presence of inorganic and organic pollutants.In particular, polychlorinated biphenyls (PCBs) and organo-chlorinated pesticides are seen as a high priority inmarine environment by international organizations because oftheir persistence, toxicity and bioaccumulation capacity.In this article the presence of some PCBs and organo-chlorinatedpesticides in sediment samples collected from the harbor ofLivorno (Northern Tyrrhenian Sea) was investigated. Theconcentration of HCHs, Aldrin, Chlordanes, DDEs, DDTs, and PCBsin 12 representative sites ranged between <1 g kg^–1and 95, 19, 32, 35, 107, and 111 g kg^–1, respectively.The application of univariate and multivariate statisticaltechniques, such as linear regression analysis and principalcomponent analysis, to the experimental data showed a differentdistribution of PCBs in the two sediment layers. On thecontrary, the vertical distribution of the other investigatedpollutants was more homogeneous and affected by randomvariability. The multivariate approach was an important tool to establish more rational criteria for the management of dredged materials.     

Lead Solubilization and Accumulation by Two Strains of Pseudomonas Obtained from a Contaminated Alfisol's Effluent in Southwestern Nigeria

Two strains of Pseudomonas species (B₂ and D₅)selected from an array of lead solubilizing and accumulatingbacteria obtained from the effluent contaminated soil samples of abattery manufacturing factory were studied. Increase in pH between 4.0 and 6.0 favoured the growth of isolates: Peaklog₁₀ cfu mL^–1 values of 7.1, 7.5 and 8.5 wereobtained at pH 4, 5 and 6, respectively.Cell bound lead concentrations for B₂ (0.34 mg mL^–1)and D₅ (0.30 mg mL^–1) obtained by direct contact withPbs were greater than lead concentrations of 0.89 and 0.25 mg mL^–1 for B₂ and D₅, respectively,obtained in dialyzed cultures. These cell bound lead concentration in undialyzed cultures were alsogreater than lead concentrations of 0.03 and 0.07 mg mL^–1 for B₂ and D₅ in culture supernatants. Glucose addition did nor improve lead accumulation in the isolates.Exploitation of such isolates for the biotreatment of lead ladeneffluent was conducted.