The impact of sequestration on the bioaccessibility of arsenic in long-term contaminated soils

Arsenic (As) contamination of soil poses a potential threat to human health, particularly for small children, through the incidental ingestion of soil from hand-to-mouth activity. In this study, we examined the relationship between As bioaccessibility using the simplified bioaccessibility extraction test (SBET) and the soil fractions that contribute to bioaccessible As in 12 long-term contaminated soils. Sequential fractionation of soils prior to As bioaccessibility assessment found that As was primarily associated with the specifically sorbed (3-26%), amorphous and poorly crystalline (12-82%), and the well crystalline (3-25%) oxyhydroxide Fe/Al phases with proportions varying depending on the mode of As input. Arsenic bioaccessibility in these soils ranged from less than 1% in the gossan soil to 48% in railway corridor soils. Soil fractions contributing to As bioaccessibility were found to be from the non-specifically (<1-11%), the specifically (<1-29%) sorbed and the amorphous and poorly-crystalline (30-93%) oxyhydroxide Fe/Al fractions. Significant correlations (p<0.05) were found between the As bioaccessible fraction and the amorphous and poorly-crystalline oxyhydroxide Fe/Al fractions indicating that this fraction is a key factor influencing As bioaccessibility in many anthropogenically contaminated soils.     

Aging activity of DDE in dissimilar rice soils in a greenhouse experiment

A green-house study was conducted in late 2005 to investigate the aging behavior of p,p'-DDE in two types of soil, Hydragric Anthrosols (An) and Hydragric Acrisols (Ac), according to the World Reference Base (WRB) [FAO/ISRIC/ISSS. 1998. World reference base for soil resources. World soil resources reports, Rome. p. 87]. Paddy rice and dry rice were grown in submerged paddy soils and non-submerged upland soils, respectively. The concentration of extractable p,p'-DDE in fresh DDE-spiked soils was 746.2ngg(-1). During the first few weeks of the experiment, the extractability of p,p'-DDE became increasingly low as the aging period prolonged. However, certain amount of p,p'-DDE that had been captured by soil minerals and organic matter (OM) could be released and became extractable in the later period. The extractability of p,p'-DDE in submerged soils was significantly lower than that in non-submerged soil, because flooding could increase the binding of pollutants to soil particles. The plantation of both dry rice and paddy rice slowed down the aging process of p,p'-DDE. After one month's growth of rice, p,p'-DDE bound to soil particles was released and became extractable. The OM and silt content of An are higher than that of Ac, resulting in more bound residues and relative lower extractability of p,p'-DDE in An. In addition, the extractability of p,p'-DDE could be reduced by the addition of rice straw to soils.     

Investigation of 1,4-dioxane originating from incineration residues produced by incineration of municipal solid waste

As a groundwater contaminant, 1,4-dioxane is of considerable concern because of its toxicity, refractory nature to degradation, and rapid migration within an aquifer. Although landfill leachate has been reported to contain significant levels of 1,4-dioxane, the origin of 1,4-dioxane in leachate has not been clarified until now. In this study, the origins of 1,4-dioxane in landfill leachate were investigated at 38 landfill sites and three incineration plants in Japan. Extremely high levels of 1,4-dioxane 89 and 340 microg l(-1), were detected in leachate from two of the landfill sites sampled. Assessments of leachate and measurement of 1,4-dioxane in incineration residues revealed the most likely source of 1,4-dioxane in the leachate to be the fly ash produced by municipal solid waste incinerators. Effective removal of 1,4-dioxane in leachate from fly ash was achieved using heating dechlorination systems. Rapid leaching of 1,4-dioxane observed from fly ash in a sequential batch extraction indicated that the incorporation of a waste washing process could also be effective for the removal of 1,4-dioxane in fly ash.     

Assessment of the effects of soil PAH accumulation by a battery of ecotoxicological tests

Surface soils were collected at remote, urban and industrial sites in the Southern of Italy in order to evaluate PAH concentrations and assess the toxic effects by a battery of ecotoxicological tests. The tests were performed on whole soils and on both organic and aqueous extracts. Further goal of this study was to integrate the results coming from each test and matrix in a synthetic toxicity index. The highest summation sigmaPAH concentrations were measured at the industrial soil, although this one did not show an high ecotoxicological risk. Among the performed tests, the phytotoxicity tests showed the highest sensitivity. For whole soil, the worst case always has been represented by test through bacteria. Our results could represent the first step toward the selection of a proper battery to characterize the soil ecotoxicological risk.     

Mineralization of the biocide chloroxylenol by electrochemical advanced oxidation processes

Electrochemical advanced oxidation processes (EAOPs) are environmentally friendly methods based on the destruction of organic pollutants in wastewaters with in situ electrogenerated hydroxyl radical. This species is formed in anodic oxidation (AO) from water oxidation at the anode and in indirect electro-oxidation methods like electro-Fenton (EF) and photoelectro-Fenton (PEF) also from reaction between catalytic Fe2+ and H2O2 continuously produced at the O2-diffusion cathode. The PEF method involves the irradiation of the treated solution with UVA light to enhance the photolysis of organics including Fe(III) complexes. In this work, the oxidation power of such EAOPs to decontaminate synthetic wastewaters of the biocide chloroxylenol (4-chloro-3,5-dimethylphenol) at pH 3.0 is comparatively examined with an undivided electrolytic cell containing a Pt or boron-doped diamond (BDD) anode and a stainless steel or O2-diffusion cathode. The initial chlorine is released as Cl(-) ion, which remains stable in the medium using Pt or is oxidized to Cl2 on BDD. The biocide solutions can be completely decontaminated using AO with a BDD anode, as well as PEF with a Pt or BDD anode. The PEF procedure with a BDD anode is the most powerful method leading to total mineralization in about 300 min, practically independent of current density. When current density rises, the degradation rate of processes increases, but they become less efficient due to the larger enhancement of waste reactions of oxidants. Chloroxylenol is much more rapidly removed in EF and PEF than in AO. 2,6-dimethylhydroquinone, 2,6-dimethyl-p-benzoquinone and 3,5-dimethyl-2-hydroxy-p-benzoquinone are identified as aromatic by-products, and maleic, malonic, pyruvic, acetic and oxalic acids are found as generated carboxylic acids. A general pathway for chloroxylenol mineralization by all EAOPs including the above by-products is proposed.     

Neurotoxic effect and metabolic responses induced by a mixture of six pesticides on the earthworm Aporrectodea caliginosa nocturna

The effects of a mixture of insecticides and/or fungicides at different environmental concentrations were investigated on a Aporrectodea caliginosa nocturna population. This laboratory experiment was carried out in order to reproduce Gaillac (France) vineyard conditions. Neurotoxicity (cholinesterase), metabolisation (glutathione-S-transferase) and oxidative stress (catalase) enzymes were studied as biomarkers in earthworms after short-term exposure in terraria. The aim was to observe the global effects of pesticide exposure, as in a vineyard, rather than focus on each isolated biomarker variation, or on each compound's impact. ChE activity was inhibited after a few days of insecticide and/or fungicide exposure, indicative of a neurotoxic effect in earthworms. The significant increase in GST and CAT activities revealed the metabolisation of these products resulting in the production of reactive oxygen species. After a long period of exposure or high concentrations, earthworms were physiologically damaged: they could not cope with the high toxicity (cellular dysfunction, protein catabolism...). Chemical analysis showed that pesticide bioaccumulation in earthworm tissues, even in those exposed to the highest concentrations and for the longest periods, was very low (under LOD) or absent. However, the study of pesticide residues in terraria after 34 days in a climate chamber suggested that earthworms participate in soil pesticide breakdown.     

Removal and degradation of aromatic compounds from a highly polluted site by coupling soil washing with photocatalysis

The possible application of two environmental remediation technologies - soil washing and photocatalysis - to remove and decompose various aromatic pollutants present in excavated soils of a contaminated industrial site has been investigated. Aqueous solutions containing the non-ionic surfactant Brij 35 were used to extract the contaminants from the soil samples. The photocatalytic treatment of the obtained washing wastes, performed in the presence of TiO(2) suspensions irradiated with simulated sunlight, showed a slow abatement of the toxic compounds due to the relevant concentrations of organics in the waste. A neat improvement of the process performances, obtained by operating in the presence of added potassium peroxydisulfate, suggests a feasible treatment route.     

Assessment of chemical, biochemical and ecotoxicological aspects in a mine soil amended with sludge of either urban or industrial origin

A greenhouse pot experiment was conducted to evaluate the effect of sewage sludge (SS), of sugar beet sludge (SBS), or of a combination of both, in the remediation of a highly acidic (pH 3.6) metal-contaminated soil, affected by mining activities. The SS was applied at 100 and 200 Mg ha(-1) (dry weight basis), and the SBS at 7 Mg ha(-1). All pots were sown with Italian ryegrass (Lolium multiflorum Lam.). After 60 d of growth, shoot biomass was quantified and analysed for Cu, Pb and Zn. The pseudo-total and bioavailable contents of Cu, Pb and Zn and the enzymatic activities of beta-glucosidase, acid phosphatase, cellulase, protease and urease were determined in the soil mixtures. Two indirect acute bioassays with leachates from the soil (luminescent inhibition of Vibrio fischeri and Daphnia magna immobilization) were also used. The SS, in particular when in combination with SBS, corrected soil acidity, while increasing the total organic matter content and the cation exchange capacity. The application of SS led to a decrease in the level of effective bioavailable metals (extracted by 0.01 M CaCl(2), pH 5.7, without buffer), but caused an increase in their potential bioavailability (extracted by a solution of 0.5M NH(4)CH(3)COO, 0.5 M CH(3)COOH and 0.01 M EDTA, pH 4.7). Plant biomass increased more than 10 times in the presence of 100 Mg SS ha(-1), and more than five times with the combined use of 100 Mg SS ha(-1) and SBS, but a considerable phytotoxic effect was observed for the application rate of 200 Mg SS ha(-1). Copper, Pb and Zn concentrations in the shoots of L. multiflorum decreased significantly when using 100 Mg SS ha(-1) or SBS. The activities of beta-glucosidase, urease and protease increased with increasing SS applications rates, but cellulase had a reduced activity when using 200 Mg ha(-1)SS. Both amendments were able to suppress soil toxicity to levels that did not affect D. magna, but increased the soil leachate toxicity towards V. fischeri, especially with the application of 200 Mg SS ha(-1). This study showed that for this type of mine soils, and when using SS of similar composition, the maximum SS application rate should be 100 Mg ha(-1), and that liming the SS amended soil with SBS did not contribute to a further improvement in soil quality.     

Synthesis and analytical follow-up of the mineralization of a new fluorosurfactant prototype

Fluorinated surfactants have become essential in numerous technical applications due to their unparalleled effectiveness and efficiency. The environmental persistence of the non-biodegradable perfluorinated alkyl moiety has become a matter of concern. Therefore, it was searched for new molecules with chemically stable fluorinated end groups which can be microbially transformed into labile fluorinated substances. One prototype substance, 10-(trifluoromethoxy)decane-1-sulfonate, has shown biomineralization. Monitoring the formation of metabolites over time elucidated the mechanism of biotransformation. Analysis was performed utilizing liquid chromatography-single quadrupole mass spectrometry (LC-MS) and quadrupole-time of flight tandem mass spectrometry (QqTOF-MS). It was possible to distinguish between two major degradation pathways of the fluorinated alkylsulfonate derivative: (i) a desulfonation and subsequent oxidation and degradation of the alkyl chain being predominant and (ii) an insertion of oxygen with a subsequent cleavage and degradation of the molecule. The utilized trifluoromethoxy-endgroup resulted in instable trifluoromethanol after degradation of the alkyl chain, which led to a high degree of mineralization of the molecule.     

Mercury sorption to sediments: dependence on grain size, dissolved organic carbon, and suspended bacteria

A combination of laboratory scale derived correlations and measurements of grain size distribution, DOC (dissolved organic carbon) concentration, and density of suspended bacteria promises to be useful in estimating Hg(II) sorption in heterogeneous streambeds and groundwater environments. This was found by shaking intact sediment and fractions thereof (<63-2000mum) with solutions of HgCl(2) (1.0-10.0ngml(-1)). The intact sediment was also shaken with the Hg(II) solutions separately in presence of DOC (6.5-90.2mugml(-1)) or brought in contact with suspensions of a strain of groundwater bacteria (2x10(4)-2x10(6)cellsml(-1)). Hg(II) sorption was rather weak and positively correlated with the grain size, and the sorption coefficient (K(d)) varied between about 300 and 600mlg(-1). By using the relative surface areas of the fractions, K(d) for the intact sediment was back calculated with 2% deviation. K(d) was negatively correlated with the concentration of DOC and positively correlated with the number of bacteria. A multiple regression showed that K(d) was significantly more influenced by the number of bacteria than by the grain size. The findings imply that common DOC concentrations in groundwater and streambeds, 5-20mugml(-1), will halve the K(d) obtained from standard sorption assays of Hg(II), and that K(d) will almost double when the cell numbers are doubled at densities that are common in aquifers. The findings suggest that simultaneous measurements of surface areas of sediment particles, DOC concentrations, and bacterial numbers are useful to predict spatial variation of Hg(II) sorption in aquifers and sandy sediments.