Engineered nanomaterials in rivers--exposure scenarios for Switzerland at high spatial and temporal resolution

Probabilistic material flow analysis and graph theory were combined to calculate predicted environmental concentrations (PECs) of engineered nanomaterials (ENMs) in Swiss rivers: 543 river sections were used to assess the geographical variability of nano-TiO₂, nano-ZnO and nano-Ag, and flow measurements over a 20-year period at 21 locations served to evaluate temporal variation. A conservative scenario assuming no ENM removal and an optimistic scenario covering complete ENM transformation/deposition were considered. ENM concentrations varied by a factor 5 due to uncertain ENM emissions (15%-85% quantiles of ENM emissions) and up to a factor of 10 due to temporal river flow variations (15%-85% quantiles of flow). The results indicate highly variable local PECs and a location- and time-dependent risk evaluation. Nano-TiO₂ median PECs ranged from 11 to 1′623 ng L⁻¹ (conservative scenario) and from 2 to 1′618 ng L⁻¹ (optimistic scenario). The equivalent values for nano-ZnO and nano-Ag were by factors of 14 and 240 smaller.     

Regulation (EC) No. 1107/2009 and upcoming challenges for exposure assessment of plant protection products--Harmonisation or national modelling approaches?

In the new European Pesticide Regulation (EC) No. 1107/2009, the harmonisation of approaches for estimation of the environmental exposure of pesticides is considered a major goal. Several member states currently require their own models for the calculation of predicted environmental concentrations (PEC) in surface water. The variety of methods makes risk evaluations rather time-consuming for both notifiers and evaluating authorities. In the present study we compare surface water concentrations of 19 compounds using EU and country-specific models and risk assessment approaches to evaluate to which extent the resulting estimated exposure concentrations differ. Our results show that EU and country specific approaches and the resulting surface water concentrations differ considerably regarding basic model assumptions and assessment methods. The results indicate that the aimed harmonisation of risk assessment approaches within the EU will be difficult based on current models. New scenarios may help to achieve a harmonisation taking country-specific features into account.     

Particulate air pollution from combustion and construction in coastal and urban areas of China

In China, the areas that are undergoing rapid urban growth are faced with increasingly more complicated air pollution problems. Sources of air pollution need to be identified and their contributions quantified. In this study, PM2.5 (particulate matter with aerodynamic diameters < or =2.5 microm), PM2.5-10 (particulate matter with aerodynamic diameters 2.5-10 microm), organic carbon (OC), and elemental carbon (EC) concentrations were measured from April to July 2009 at four selected areas in Xiamen (the downtown area, an industrial park, a suburb, and one remote site). The contributions of carbonaceous aerosols to PM2.5 and PM2.5-10 were 20-30% and 10-20%, respectively, indicating that finer particles contained more carbonaceous aerosols. The EC concentrations in PM2.5 at the downtown, industrial, suburb, and remote sites were 2.16 +/- 0.61, 2.05 +/- 0.45, 1.69 +/- 0.54, and 0.65 +/- 0.43 microg m-3, respectively, showing a decrease from the urban and industrial hotspots to the surrounding areas. These data show that carbonaceous aerosols emitted from the combustion of fossil fuels in urban and industrial hotspots influence air quality at the regional scale. Higher levels of PM2.5 and PM2.5-10 were observed at the suburb site compared to the urban and industrial sites. Peak EC concentrations in PM2.5 were observed during the morning and evening rush hours. However, peak PM2.5 levels at the suburb site were observed around noon, which coincides with construction work hours, instead of the morning and evening rush hours when emissions from combustion dominated. These findings indicate that both fuel combustion and construction have exacerbated air pollution in coastal and urban areas in China.     

Petroleum refinery stripped sour water treatment using the activated sludge process

A pilot study was performed over 91 days to determine if the activated sludge process could treat a segregated stripped sour water (SSW) stream from a petroleum refinery. The study was performed in two periods. The first period was terminated after 19 days, as a result of excessive sludge bulking. The elimination of sludge bulking during the 70-day second period is attributed to operational changes, which included aerating the influent to oxidize reduced sulfur, adjusting the influent pH, and adding micronutrients to satisfy biological requirements. The pilot plant provided a chemical oxygen demand (COD) removal of up to 93%. Nitrification was achieved, with effluent ammonia values < 1 mg-N/L. These results indicate that direct treatment of SSW with the activated sludge process is possible and has direct application to full-scale petroleum refinery wastewater plant upgrades.     

Microwave-assisted synthesis of hydroxyapatite for the removal of lead(II) from aqueous solutions

Purpose

This study has the objective to evaluate the lead(II) removal capacity of hydroxyapatite powder synthesized by microwave as an alternative method to decrease production time and cost.

Methods

Hydroxyapatite (HA) was synthesized by a microwave-assisted precipitation method using calcium nitrate and ammonium hydrogen phosphate as calcium and phosphorus sources, respectively. X-ray diffraction and Fourier transform infrared results clearly revealed that the resulting powder was HA with high purity and crystallinity. The obtained powder was used for the removal of lead(II) from aqueous solutions. The effects of pH, amount of adsorbent, initial lead(II) concentration, and contact time were studied in batch experiments.

Results

In the adsorption experiments, maximum lead(II) retention was obtained at pH 6. Adsorption equilibrium was established after 40 min. It was found that the adsorption of lead(II) on HA was correlated well (R ²?=?0.958) with the Freundlich equation for the concentration range studied. Both ion exchange and adsorption process were thought to exist in the removal process.

Conclusions

This study indicates that easily and rapidly synthesized HA by microwave-assisted precipitation method could be used as an efficient adsorbent for removal of lead(II) from aqueous solutions.     

Detection of antibacterial-like activity on a silica surface: fluoroquinolones and their environmental metabolites

Background, scope, and aims

Antibacterial fluoroquinolones (FQs) are third-generation antibiotics that are commonly used as therapeutic treatments of respiratory and urinary tract infections. They are used far less in intensively farmed animal production systems, though their use may be permitted in the veterinary treatments of flocks or in medicated feeds. When used, only a fraction of ingested parent FQ actually reaches the in vivo target site of infection, while the remainder is excreted as the parent FQ and its metabolized products. In many species?? metabolism, enrofloxacin (EF) is converted into ciprofloxacin (CF) while both FQs are classified as parent FQs in human treatments. It is therefore likely that both FQs and their metabolic products will contribute to a common pool of metabolites in biological wastes. Wastes from intensive farming practices are either directly applied to agricultural land without treatment or may be temporarily stored prior to disposal. However, human waste is treated in sewage treatment plants (STPs) where it is converted into biosolids. In the storage or treatment process of STPs, FQs and their in vivo metabolites are further converted into other environmental metabolites (FQEMs) by ex vivo physicochemical processes that act and interact to produce complex mixtures of FQEMs, some of which have antibacterial-like activities. Biosolids are then often applied to agricultural land as a fertilizer amendment where FQs and FQEMs can be further converted into additional FQEMs by soil processes. It is therefore likely that FQ-contaminated biowaste-treated soils will contain complex mixtures of FQEMs, some of which may have antibacterial-like activities that may be expressed on bacteria endemic to the receiving agricultural soil environment. Concern has arisen in the scientific and in the general community that repeated use of FQ-contaminated biowaste as fertilizer amendments of nutrient-impoverished agricultural land may create a selective environment in which FQ-resistant bacteria might grow. The likelihood of this happening will depend, to some extent, on whether bioactive FQEMs are first synthesized from the parent FQs by the action and interaction of in vivo and ex vivo processes producing bioactive FQEMs in biowastes and biosolids. The postulated creation of a selective environment will also depend, in part, on whether such bioactive FQEMs are biologically available to bacteria, which may, in turn, be influenced by soil type, amendment regime, and the persistence of the bioactive FQEMs. Additionally, soil bacteria and soil processes may be affected in different ways or extents by bioactive FQEMs that could possibly act additively or synergistically at ecological targets in these non-target bacteria. This is an important consideration, since, while parent FQs have well-defined ecological targets (DNA gyrase and topoisomerase IV) and modes of bactericidal action, the FQEMs and their possible modes of action on the many different species of soil bacteria is less well studied. It is therefore understandable that there is a lack of conclusive evidence directly attributing biosolid usage to any increase in FQ-resistant bacteria detected in biowaste-amended agricultural soil. However, a lack of evidence may simply imply that a causal relationship between biosolid usage programs and any detection of low levels of FQ-resistant bacteria in soils has yet to be established, rather than an assumption of no relationship whatsoever. Based on results presented in this paper, the precautionary principle should be applied in the usage of FQ-contaminated biosolids as fertilizer amendments of agricultural land. The aim of this research was to test whether any bioactive FQEMs of EF could be synthesized by aerobic fermentation processes using Mycobacterium gilvum (American Tissue Culture Collection) and a mixed culture of microorganisms derived from an agricultural soil. High-performance thin-layer chromatography (HPTLC) and bioautography were tested as screening techniques in the detection and analysis of bioactive FQEMs.

Materials and methods

FQEMs derived from M. gilvum and mixed (soil) culture aerobic ferments were fractionated using preparative HPTLC. A standard strain of Escherichia coli was then used as the reporter organism in a bioautography assay in the detection of bioactive-FQEMs on a mid-section of the HPTLC plate. Plate sections were reassembled, and a photograph was taken under low-intensity ultraviolet (UV) light to reveal regions that contained analytes that had UV chromophores and antibacterial-like activities.

Results and discussion

Many fractionated FQEMs displayed antibacterial-like activity while bound to silica gel HPTLC plates. These results also provide evidence that sufficient quantities of biologically active FQEMs were biologically available from a silica gel surface to prevent the adherent growth of E. coli. Six to seven FQEMs derived from EF using aerobic fermentation processes had antibacterial-like activities, while two FQEMs were also detectable using UV light. Furthermore, similar banding patterns of antibacterial-like activity were observed in both the monoculture (M. gilvum) and mixed culture bioautography assays, indicating that similar processes operated in both aerobic fermentations, either producing similar biologically active FQEMs or biologically active FQEMs that had similar physicochemical properties in both ferments. The simplest explanation for these findings is that the tested agricultural soil also contained mycobacteria that metabolized EF in a similar way to the purchased standard monoculture M. gilvum. Additionally, the marked contrast between the bioautography results and the UV results indicated that the presence of UV chromophores is not a prerequisite for the detection of antibacterial-like activity.

Conclusions

A reliance on spectrophotometric techniques in the detection of bioactive FQEMs in the environment may underestimate component antibacterial-like activity and, possibly, total antibacterial-like activity expressed by EF and its FQEMs. The described bioautography method provides a screening technique with which antibacterial-like activities derived from EF and possibly other FQs can be detected directly on silica gel HPTLC plates.

Recommendations

It is recommended that both bioassay and instrumental analytical techniques be used in any measurement of hazard and risk relating to antibacterial-like activities in the environment that are derived from fluoroquinolone antibiotics and their environmental metabolites.     

Lead and cadmium accumulation in anuran amphibians of a permanent water body in arid Midwestern Argentina

Purpose

Heavy metals have been detected in water and sediments from the Embalse La Florida, an artificial lake in the arid region of San Luis province, Argentina, representing one of the few sources of permanent water for reproduction of native anuran species. This study assesses lead (Pb) and cadmium (Cd) concentrations in the anuran species found in this water reservoir as well as differences between compounds, species and sites of collection.

Methods

Adult anuran amphibians were collected on the north and south shores of the Embalse La Florida and Pb and Cd concentrations were measured in whole body homogenates digested using wet ashing techniques.

Results

All individuals of the six species assayed had detectable levels of Pb and Cd that ranged from 1.19 to 5.57 ??g/g dry mass and from 1.09 to 6.86 ??g/g dry mass, respectively. Anuran amphibians collected in the more contaminated south shore accumulated 21% more Cd and 40% more Pb than individuals from the less altered north shore. Cd and Pb accumulation was not significantly correlated with the concentration in water at the site of collection.

Conclusions

Amphibians of the Embalse La Florida accumulate Cd and Pb. Between and within species, differences were detected in Cd and Pb concentrations. Differences in metal concentrations between species, metals, and individuals collected on shores of the Embalse La Florida with different contamination, were detected. Therefore, it is crucial to implement adequate policies to protect amphibians from the accelerated urban development experienced in this location.     

Pesticide exposure and serum organochlorine residuals among testicular cancer patients and healthy controls

The incidence of testicular cancer (TC) has been increasing worldwide during the last decades. The reasons of the increase remains unknown, but recent findings suggest that organochlorine pesticides (OPs) could influence the development of TC. A hospital-based case-control study of 50 cases and 48 controls was conducted to determine whether environmental exposure to OPs is associated with the risk of TC, and by measuring serum concentrations of OPs, including p,p'-dichlorodiphenyldichloroethylene (p,p'-DDE) isomer and hexachlorobenzene (HCB) in participants. A significant association was observed between TC and household insecticide use (odds ratio [OR] = 3.01, 95 % CI: 1.11-8.14; OR(adjusted) = 3.23, 95 % CI: 1.15-9.11). Crude and adjusted ORs for TC were also significantly associated with higher serum concentrations of total OPs (OR = 3.15, 95 % CI: 1.00-9.91; OR(adjusted) = 3.34, 95 % CI: 1.09-10.17) in cases compared with controls. These findings give additional support to the results of previous research that suggest that some environmental exposures to OPs may be implicated in the pathogenesis of TC.     

Correction methods for organic carbon artifacts when using quartz-fiber filters in large particulate matter monitoring networks: the regression method and other options

Sampling and handling artifacts can bias filter-based measurements of particulate organic carbon (OC). Several measurement-based methods for OC artifact reduction and/or estimation are currently used in research-grade field studies. OC frequently is not artifact-corrected in large routine sampling networks (e.g., U.S. Environmental Protection Agency (EPA)'s Chemical Speciation Network). In some cases, the OC artifact has been corrected using a regression method (RM) for artifact estimation. In this method, the gamma-intercept of the regression of the OC concentration on the fine particle (PM2.5) mass concentration is taken to be an estimate of the average OC sampling artifact (net of positive and negative artifacts). This paper discusses options for artifact correction in large routine sampling networks. Specifically, the goals are to (1) articulate the assumptions and limitations inherent to the RM, (2) describe other artifact correction approaches, and (3) suggest a cost-effective method for artifact correction in large monitoring networks. The RM assumes a linear relationship between measured OC and PM mass: a constant slope (OC mass fraction) and a constant intercept (RM artifact estimate). These assumptions are not always valid. Additionally, outliers and other individual data points can have a large influence on the RM artifact estimates. The RM yields results within the range of measurement-based methods for some datasets and not for others. Given that the adsorption of organic gases increases with atmospheric concentrations of organics, subtraction of an average artifact from all samples (e.g., across multiple sites) will underestimate OC for lower-concentration samples (e.g., clean sites) and overestimate OC for higher-concentration samples (e.g., polluted sites). For relatively accurate, simple, and cost-effective artifact OC estimation in large networks, the authors suggest backup filter sampling on at least 10% of sampling days at all sites with artifact correction on a sample-by-sample basis as described herein.     

The reactive transport of trichloroethene is influenced by residence time and microbial numbers

The dechlorination rate in a flow-through porous matrix can be described by the species specific dechlorination rate observed in a liquid batch unless mass transport limitations prevail. This hypothesis was examined by comparing dechlorination rates in liquid batch with that in column experiments at various flow rates (3-9-12 cm day(-1)). Columns were loaded with an inoculated sand and eluted with a medium containing 1mM trichloroethene (TCE) for 247 days. Dechlorination in the column treatments increased with decreasing flow rate, illustrating the effect of the longer residence time. Zeroth order TCE or cis-DCE degradation rates were 4-7 folds larger in columns than in corresponding batch systems which could be explained by the higher measured Geobacter and Dehalococcoides numbers per unit pore volume in the columns. The microbial numbers also explained the variability in dechlorination rate among flow rate treatments marked by a large elution of the dechlorinating species' yield as flow increased. Stop flow events did not reveal mass transport limitations for dechlorination. We conclude that flow rate effects on reactive transport of TCE in this coarse sand are explained by residence time and by microbial transport and that mass transport limitations in this porous matrix are limited.