Finite element analysis of knee injury risks in car-to-pedestrian impacts

In vehicle-pedestrian collisions, lower extremities of pedestrians are frequently injured by vehicle front structures. In this study, a finite element (FE) model of THUMS (total human model for safety) was modified in order to assess injuries to a pedestrian lower extremity. Dynamic impact responses of the knee joint of the FE model were validated on the basis of data from the literature. Since in real-world accidents, the vehicle bumper can impact the lower extremities in various situations, the relations between lower extremity injury risk and impact conditions, such as between impact location, angle, and impactor stiffness, were analyzed. The FE simulation demonstrated that the motion of the lower extremity may be classified into a contact effect of the impactor and an inertia effect from a thigh or leg. In the contact phase, the stress of the bone is high in the area contacted by the impactor, which can cause fracture. Thus, in this phase the impactor stiffness affects the fracture risk of bone. In the inertia phase, the behavior of the lower extremity depends on the impact locations and angles, and the knee ligament forces become high according to the lower extremity behavior. The force of the collateral ligament is high compared with other knee ligaments, due to knee valgus motions in vehicle-pedestrian collisions.     

Study of the presence of fluorine in the recycled fractions during carbothermal treatment of EAF dust

Carbothermal treatment tests of electric arc furnace dusts (EAFD) using the Waelz kiln process were carried out in pilot-scale for the production of zinc oxide. The association of halides in the EAFD, and the recycled products, such as zinc oxide fumes and high-grade iron contents fractions were examined by X-ray diffraction (XRD), scanning electron microscope (SEM) and transmission electron microscope (TEM) analysis. XRD reveals the presence of chlorine and fluorine in the dusts in the form of KCl, NaCl and CaF2. An ultra-pure fraction of zinc was obtained after the Double Leaching Waelz Oxide (DLWO) process was performed on the zinc oxide fumes. The halide contents were reduced to approximately 100 ppm Cl and 700 ppm F. The rest of these elements are in the form of CaF2. About 65% F is volatilised as lead and zinc fluorides, 15% is expected in the magnetic fractions and 20% in non-magnetic fractions as CaF2 and MnF2, respectively.     

Solid waste management practices and review of recovery and recycling operations in Turkey

This paper provides a general overview of solid waste data and management practices employed in Turkey during the last decade. Municipal solid waste statistics and management practices including waste recovery and recycling initiatives have been evaluated. Detailed data on solid waste management practices including collection, recovery and disposal, together with the results of cost analyses, have been presented. Based on these evaluations basic cost estimations on collection and sorting of recyclable solid waste in Turkey have been provided. The results indicate that the household solid waste generation in Turkey, per capita, is around 0.6 kg/year, whereas municipal solid waste generation is close to 1 kg/year. The major constituents of municipal solid waste are organic in nature and approximately 1/4 of municipal solid waste is recyclable. Separate collection programmes for recyclable household waste by more than 60 municipalities, continuing in excess of 3 years, demonstrate solid evidence for public acceptance and continuing support from the citizens. Opinion polls indicate that more than 80% of the population in the project regions is ready and willing to participate in separate collection programmes. The analysis of output data of the Material Recovery Facilities shows that, although paper, including cardboard, is the main constituent, the composition of recyclable waste varies strongly by the source or the type of collection point.     

Biosolids-derived nitrogen mineralization and transformation in forest soils

Utilization of biosolids through land application is becoming increasingly popular among wastewater managers. To minimize the potential contamination of receiving waters from biosolids-derived nitrogen (N), it is important to understand the availability of N after land application of biosolids. In this study, four secondary biosolids (two municipal and two pulp and paper industrial biosolids) were used in a laboratory incubation experiment to simulate N mineralization and transformation after land application. Municipal biosolids were from either aerobically or anaerobically digested sources, while pulp and paper industrial biosolids were from aerated wastewater stabilization lagoons. These biosolids were mixed with two New Zealand forest soils (top 100 mm of a volcanic soil and a brown soil) and incubated at two temperatures (10 and 20 degrees C) for 26 wk. During incubation, mineralized N was periodically leached from the soil-biosolids mixture with 0.01 M CaCl2 solution and concentrations of NH4 and NO3 in leachate were determined. Mineralization of N from aerobically digested municipal biosolids (32.1%) was significantly more than that from anaerobically digested biosolids (15.2%). Among the two pulp and paper industrial biosolids, little N leached from one, while as much as 18.0% of total organic N was leached from the other. As expected, mineralization of N was significantly greater at 20 degrees C (average 22.8%) than at 10 degrees C (average 9.7%). It was observed that more N in municipal biosolids was mineralized in the brown soil, whereas more N in pulp and paper industrial biosolids mineralized in the volcanic soil. Transformation of NH4 to NO3 was affected by soil type and temperature.     

Nitrous oxide emission and denitrification in chronically nitrate-loaded riparian buffer zones

Riparian buffer zones are known to reduce diffuse N pollution of streams by removing and modifying N from agricultural runoff. Denitrification, often identified as the key N removal process, is also considered as a major source of the greenhouse gas nitrous oxide (N2O). The risks of high N2O emissions during nitrate mitigation and the environmental controls of emissions have been examined in relatively few riparian zones and the interactions between controls and emissions are still poorly understood. Our objectives were to assess the rates of N2O emission from riparian buffer zones that receive large loads of nitrate, and to evaluate various factors that are purported to control N emissions. Denitrification, nitrification, and N2O emissions were measured seasonally in grassland and forested buffer zones along first-order streams in The Netherlands. Lateral nitrate loading rates were high, up to 470 g N m(-2) yr(-1). Nitrogen process rates were determined using flux chamber measurements and incubation experiments. Nitrous oxide emissions were found to be significantly higher in the forested (20 kg N ha(-1) yr(-1)) compared with the grassland buffer zone (2-4 kg N ha(-1) yr(-1)), whereas denitrification rates were not significantly different. Higher rates of N2O emissions in the forested buffer zone were associated with higher nitrate concentrations in the ground water. We conclude that N transformation by nitrate-loaded buffer zones results in a significant increase of greenhouse gas emission. Considerable N2O fluxes measured in this study indicate that Intergovernmental Panel on Climate Change methodologies for quantifying indirect N2O emissions have to distinguish between agricultural uplands and riparian buffer zones in landscapes receiving large N inputs.     

Forest certification--an instrument to promote sustainable forest management?

Forest certification was introduced in the early 1990s to address concerns of deforestation and forest degradation and to promote the maintenance of biological diversity, especially in the tropics. Initially pushed by environmental groups, it quickly evolved as a potential instrument to promote sustainable forest management (SFM). To date about 124 million ha or 3.2% of the world's forests have been certified by the different certification schemes created over the last decade.Forest certification shares the aim of promoting SFM with another tool, namely criteria and indicators (C&I) for SFM. C&I sets are mainly developed for the national level to describe and monitor status and trends in forests and forest management. They also provide an essential reference basis for forest certification standards, which set performance targets to be applied on a defined area. Progress in developing these two different tools has been significant.After 10 years of implementation, it is evident that the original intention to save tropical biodiversity through certification has largely failed to date. Most of certified areas are in the temperate and boreal zone, with Europe as the most important region. Only around ten per cent is located in tropical countries.The standards used for issuing certificates upon compliance are diverse, both between certification schemes and within one and the same scheme when applied in different regions. However, they are at least equal to legal requirements and often include elements that set actually higher standards.While the quality of actual audits of the standards is of varying quality, there are indications that independent audits are an incentive for improving forest management. As a voluntary market-based tool, forest certification is depending on the ability to cover the costs incurred and thus on often-elusive green consumer sentiment.Regardless of many difficulties, forest certification has been very successful in raising awareness and disseminating knowledge on a holistic SFM concept, embracing economic, environmental and social issues, worldwide. It also provides a tool for a range of other applications than assessment of sustainability, such as e.g. verifying carbon sinks.     

Wildfire effects on hiking and biking demand in New Mexico: a travel cost study

We use a travel cost model to test the effects of wild and prescribed fire on visitation by hikers and mountain bikers in New Mexico. Our results indicate that net benefits for mountain bikers is $150 per trip and that they take an average of 6.2 trips per year. Hikers take 2.8 trips per year with individual net benefits per trip of $130. Both hikers' and mountain bikers' demand functions react adversely to prescribed burning. Net benefits for both groups fall as areas recover from prescribed burns. Because both visitation and annual recreation benefits decrease to these two types of visitors, this gives rise to multiple use costs associated with prescribed burning. With respect to wildfire, hikers and mountain bikers both exhibit decreased visitation as areas recover from wildfires, however, only hikers indicate an increase in per trip net benefits. Bikers' demand effectively drops to zero. These results differ from previous findings in the literature and have implications for efficient implementation of the National Fire Plan and whether prescribed burning is a cost effective tool for multiple use management of National Forests. Specifically, that fire and recreation managers cannot expect recreation users to react similarly to fire across recreation activities, or different geographic regions. What is cost effective in one region may not be so in another.     

Impact of busy roads on breeding success in pied flycatchers Ficedula hypoleuca

The impact of dense traffic on the breeding success in pied flycatchers (Ficedula hypoleuca) was studied using roadside nest-boxes. Nest site selection and breeding success of flycatchers were observed in relation to the distance from the road. The number of occupied territories was no higher closer to the road than it was deeper inside the forest. The distance to the road had no effect on the laying date, clutch size, or brood size. However, nests closer to the road were more likely to fail at the chick stage. The number of broods that were closer to roads and were lost completely was significantly higher than those further away. As a consequence, the number of fledglings per breeding attempt decreased closer to roads. The nestlings typically died as older chicks when the parent birds were providing them with maximum quantities of food. A possible reason for the declining reproductive success was the traffic-related mortality of parent birds, as weather conditions were not especially adverse for raising healthy offspring.     

The effect of clock-shift on the initial orientation of wild rock doves (<Emphasis Type="Italic">Columba l. livia</Emphasis>)

Previous experiments on wild rock doves ( Columba l. livia Gmelin) released within their familiar area revealed an evident effect of fast-shifting, although shifted doves, but not controls, tended to orient homeward. Such an outcome suggested a possible influence of the release time per se on the directional choices of the tested doves. In the present study, this hypothesis was investigated by comparing the orientation of slow-shifted birds to that of two control groups released at different times of the day. As would be expected if doves make use of a time-compensated sun compass, the bearings of shifted birds were deflected clockwise with respect to controls. The time of release itself seemed to influence only the scatter of the vanishing bearings of controls. These findings testify to the substantial similarity of clock-shift effects on the initial orientation of rock doves to those on homing pigeons released from familiar sites.