Toward Integrative Management Advice of Water Quality, Oil Spills, and Fishery in the Gulf of Finland: A Bayesian Approach

Understanding and managing ecosystems affected by several anthropogenic stressors require methods that enable analyzing the joint effects of different factors in one framework. Further, as scientific knowledge about natural systems is loaded with uncertainty, it is essential that analyses are based on a probabilistic approach. We describe in this article about building a Bayesian decision model, which includes three stressors present in the Gulf of Finland. The outcome of the integrative model is a set of probability distributions for future nutrient concentrations, herring stock biomass, and achieving the water quality targets set by HELCOM Baltic Sea Action Plan. These distributions can then be used to derive the probability of reaching the management targets for each alternative combination of management actions.     

Microbial contamination of drinking water in Pakistan—a review

Water pollution with pathogenic microorganisms is one of the serious threats to human health, particularly in developing countries. The main objective of this article is to highlight microbial contamination of drinking water, the major factors responsible for microbial contamination, and the resulting health problems in Pakistan. Furthermore, this study will be helpful for researchers and administrative agencies to initiate relevant studies and develop new policies to protect further deterioration of water supply with pathogenic microbes and ensure clean and safe drinking water to the public in Pakistan. In Pakistan, water at the source, in the distribution network, and at the consumer tap is heavily polluted with coliforms and fecal coliforms all over the country. An overview of more than 7,000 water samples reviewed here reveals that an average of over 71 and 58 % samples in the country was contaminated with total coliforms and fecal coliforms, respectively. Drinking water contamination accounts for 20 to 40 % of all diseases in the country, which causes national income losses of Rs 25–58 billion annually (US$0.25–0.58 billion, approximately 0.6–1.44 % of the country’s GDP). Improper disposal of industrial and municipal wastes is the most important factor responsible for water pollution in the country followed by cross-contamination due to old and leaking pipes and lack of water filtration and disinfection facilities. There is an urgent need for emergency steps to stop further deterioration of water quality and improve the existing water quality so as to protect the public from widespread waterborne diseases.     

Mineral wool waste in Europe: a review of mineral wool waste quantity,quality, and current recycling methods

The construction and demolition (C&D) industry has been identified as a major source of waste. European Union legislation states that, by 2020, 70 % of C&D waste must be prepared for reuse, recycled or recovered. European Union member states must increase their C&D waste recycling percentages in order to meet this binding target. Utilization of mineral wool waste, often considered unrecyclable, could improve the recycling percentage of C&D waste. In this article, mineral wool production and waste volumes are estimated based on information from the Eurostat database. A literature survey is conducted to collect information about mineral wool material properties, current recycling methods, and barriers to recycling of mineral wool, and suitable methods for separating mineral wool from C&D waste streams and the economic viability of mineral wool recycling are discussed. It is noted that accurate estimation of mineral wool waste volumes is problematic due to the fragmented nature of available data. Based on the literature review, current methods for recycling mineral wool waste include utilization of mineral wool waste as a raw material in various products. Barriers to recycling include economic questions and issues related to the purity and health effects of mineral wool waste. Material properties of mineral wool waste, such as fire resistance, could provide improved properties in products utilizing mineral wool waste as a raw material.     

Biochemical and standard toxic effects of acetaminophen on the macrophyte species Lemna minor and Lemna gibba

Acetaminophen is globally one of the most prescribed drugs due to its antipyretic and analgesic properties. However, it is highly toxic when the dosage surpasses the detoxification capability of an exposed organism, with involvement of an already described oxidative stress pathway. To address the issue of the ecotoxicity of acetaminophen, we performed acute exposures of two aquatic plant species, Lemna gibba and Lemna minor, to this compound. The selected biomarkers were number of fronds, biomass, chlorophyll content, lipid peroxidation (TBARS assay), and proline content. Our results showed marked differences between the two species. Acetaminophen caused a significant decrease in the number of fronds (EC₅₀?=?446.6 mg/L), and the establishment of a dose-dependent peroxidative damage in L. minor, but not in L. gibba. No effects were reported in both species for the indicative parameters chlorophyll content and total biomass. However, the proline content in L. gibba was substantially reduced. The overall conclusions point to the occurrence of an oxidative stress scenario more prominent for L. minor. However, the mechanisms that allowed L. gibba to cope with acetaminophen exposure were distinct from those reported for L. minor, with the likely involvement of proline as antioxidant.     

Heavy-duty,off-road diesel engine low-load particle number emissions and particle control

Exhaust gas particle and ion size distributions were measured from an off-road diesel engine complying with the European Stage IIIB emission standard. The measurements were performed at idling and low load conditions on an engine dynamometer. Nucleation-mode particles dominated the diesel exhaust particle number emissions at idle load. The nonvolatile nucleation-mode geometric mean diameter was detected at 10 nm or below. The nonvolatile nucleation-mode charge state implied that it has evolved through a highly ionizing environment before emission from the engine. The determined charging probabilities were 10.0 ± 2.2% for negative and 8.0 ± 2.0% for positive polarity particles. The nonvolatile nucleation particle concentration and size was also shown to be dependent on the lubricant oil composition. The particle emissions were efficiently controlled with a partial filter or with partial filter + selective catalytic reduction (SCR) combination. The particle number removal efficiencies of the aftertreatment systems were over 95% for wet total particle number (>3nm) and over 85% for dry particle total number. Nevertheless, the aftertreatment systems’ efficiencies were around 50% for the soot-mode particles. The low-load nonvolatile nucleation particle emissions were also dependent on the engine load, speed, and fuel injection pressure. The low load particle number emissions followed the soot-core trade-off, similar to medium or high operating loads.

Implications:Idling and low-load diesel engine exhaust emissions affect harmfully the ambient air quality. The low-load particle number emissions are here shown to peak in the 10-nm size range for a modern off-road engine. The particles are electrically charged and nonvolatile and they originate from the combustion process. Tailpipe particle control by open channel filter can remove more than 85% of the nonvolatile 10-nm particles and about 50% of the soot-mode particles, while the fuel injection pressure increase can lead to particle number increase. The study provides a new viewpoint for low-load particle emissions and control.     

Media Representations of Climate Change: A Meta-Analysis of the Research Field

A flurry of studies in recent years has analyzed the role of media in climate change communication. This article provides a systematic, large-scale, and up-to-date overview of the objects and characteristics of this research field through a meta-analysis. It identifies 133 relevant studies and analyzes them empirically. The results show that research activity has risen strongly over time, and that the analytical spectrum has expanded to include an increasing number of countries, more types of media including online and social media, and different methodological approaches. The analysis also demonstrates, however, that scholarship in the field still concentrates strongly on Western countries and print media.     

Declining coastal piscivore populations in the Baltic Sea: Where and when do sticklebacks matter?

Intraguild predation interactions make fish communities prone to exhibit alternative stable states with either piscivore or prey fish dominance. In the Baltic Sea, local declines of coastal piscivores like perch (Perca fluviatilis) have been observed to coincide with high densities of sticklebacks (Gasterosteus aculeatus). Mechanisms behind this shift between piscivore and stickleback dominance were studied both experimentally and in field. Results showed that predation by sticklebacks has a strong negative effect on perch larvae survival, but this effect rapidly decreases with increasing perch size, likely due to gape limitations and digestion constraints in sticklebacks. Large spatial and temporal variations in patterns of stickleback migration into perch spawning sites were observed. Whether or not high density of sticklebacks will cause declines in coastal piscivore populations is suggested to depend on the availability of spawning sites in which sticklebacks do not migrate into or arrive late in the reproduction season of coastal piscivores.     

Cyclo-stationary maximum cross-covariance analysis for exogenously forced environmental systems

The response of an ecological system to external forcings shows marked seasonality and complex time delays. In order to take seasonality into account, the assumption of stationarity inherent in most statistical models for time series is replaced here by more flexible cyclo-stationarity. To describe the dominant modes of the cross-covariance structure of the system and the forcing, temporal (orthonormal) patterns are derived. They are estimated by a singular value decomposition of the cyclo-stationary sample cross-covariance matrix. These patterns allow to formulate a prediction scheme for the system once the forcing is known. The method has comparatively little tendency for multi-collinearity, so that it is well applicable also for multivariate settings and shorter data records. The method is illustrated for an aquatic ecosystem with distinct phases of a biological succession.     

Bewertung der Umweltgefährlichkeit von Stoffen

By sending a questionnaire to all companies of the pulp and paper, textile finishing and leather industries in Germany a study ascertained wastewater data concerning the general situation, treatment processes and specific amounts. With these data standard figures used in the EU for the assessment of chemical substances were checked. The volume flows of the industrial sewage treatment were determined for the facilities of all three branches which discharge their wastewater directly to the receiving waters. The 10 percentile score of these facilities amounted to only a quarter of the EU standard figure of 2,000 m³/d. This value is related to a standardised waste water treatment plant within the EU, which treated the wastewater of 200 l/d from 10,000 inhabitants. The analyses of the entire branch in each case yield dilution factors of 20–70% of the EU standard value of 10. Only the full tanning leather companies yielded a dilution factor of 10. The volume flows of the sewage treatment plants of the facilities discharging to the sewer system exceeds 2,000 m³/d in call cases.