Variability of sediment-contact tests in freshwater sediments with low-level anthropogenic contamination - Determination of toxicity thresholds

Freshwater sediments with low levels of anthropogenic contamination and a broad range of geochemical properties were investigated using various sediment-contact tests in order to study the natural variability and to define toxicity thresholds for the various toxicity endpoints. Tests were performed with bacteria (Arthrobacter globiformis), yeast (Saccharomyces cerevisiae), nematodes (Caenorhabditis elegans), oligochaetes (Lumbriculus variegatus), higher plants (Myriophyllum aquaticum), and the eggs of zebrafish (Danio rerio). The variability in the response of some of the contact tests could be explained by particle size distribution and organic content. Only for two native sediments could a pollution effect not be excluded. Based on the minimal detectable difference (MDD) and the maximal tolerable inhibition (MTI), toxicity thresholds (% inhibition compared to the control) were derived for each toxicity parameter: >20% for plant growth and fish-egg survival, >25% for nematode growth and oligochaete reproduction, >50% for nematode reproduction and >60% for bacterial enzyme activity.     

Selection of adsorbents for treatment of leachate: batch studies of simultaneous adsorption of heavy metals

The simultaneous adsorption of copper (Cu), cadmium (Cd), nickel (Ni), and lead (Pb) ions from spiked deionized water and spiked leachate onto natural materials (peat A and B), by-product or waste materials (carbon-containing ash, paper pellets, pine bark, and semi-coke), and synthetic materials (based on urea-formaldehyde resins, called blue and red adsorbents) or mixtures thereof was investigated. The adsorbents that gave the highest metal removal efficiencies were peat A, a mixture of peat B and carbon-containing ash, and a mixture of peat A and blue. At an initial concentration of 5 mg/l for each metal, the removal of each species of metal ion from spiked water and spiked leachate solutions was very good (>90%) and good (>75%), respectively. When the initial concentration of each metal in the solutions was twenty times higher (100 mg/l), there was a noticeable decrease in the removal efficiency of Cu²⁺, Cd²⁺, and Ni²⁺, but not of Pb²⁺. Langmuir monolayer adsorption capacities, q_m, on peat A were found to be 0.57, 0.37, and 0.36 mmol/g for Pb²⁺, Cd²⁺, and Ni²⁺, respectively. The order of metal adsorption capacity on peat A was the same in the case of competitive multimetal adsorption conditions as it was for single-element adsorption, namely Pb²⁺ > Cd²⁺ ≥ Ni²⁺. The results show that peat alone (an inexpensive adsorbent) is a good adsorbent for heavy metal ions.     

Alternating copolymers and alternative device geometries for organic photovoltaics

The efficiency of conversion of light to electrical energy with the help of conjugated polymers and molecules is rapidly improving. The optical absorption properties of these materials can be designed, and implemented via molecular engineering. Full coverage of the solar spectrum is thus feasible. Narrow absorption spectra allow construction of tandem solar cells. The poor transport properties of these materials require thin devices, which limits optical absorption. Alternative device geometries for these flexible materials compensate for the optical absorption by light trapping, and allow tandem cells.     

Concentrations of (137)Cs in summer pasture plants that reindeer feed on in the reindeer management area of Finland

Samples of summer pasture plants that reindeer feed on were collected in order to study ¹³⁷Cs concentrations in different plant species and in species nested in certain site types, and to study the regional distribution of ¹³⁷Cs in the Finnish reindeer management area. Plant species were categorized by the site types of mineral soil forest (xeric heath forest and mesic heath forest) and peatland. A third category called ’other plant species’ included plants with various site types, poorly determined species and species with poor statistics. The ¹³⁷Cs concentrations in different site types differed significantly. The mean ¹³⁷Cs concentrations of the whole reindeer management area in the xeric heath forest plant species was 44 ± 27 Bq/kg dw, in the mesic heath forest plant species 75 ± 59 Bq/kg dw and in the peatland plant species 219 ± 150 Bq/kg dw. The peatland species uptake ¹³⁷Cs more efficiently than plant species of mineral soil forests. A particularly efficient collector of ¹³⁷Cs was Trichophorum sp. It is suggested that Trichophorum sp. could be used as an indicator species for reindeer summer fodder plants. The highest concentrations of ¹³⁷Cs were found in Southern Lapland and the lowest in Northern Lapland. Today, the concentrations of ¹³⁷Cs in summer pasture plants that reindeer feed on in Finland are at such a level that there is no need to avoid any plant species. In the case of future nuclear fallout, reindeer grazing in peatlands would increase concentrations of ¹³⁷Cs in reindeer meat.     

Microbial Contamination of Groundwater at Small Community Water Supplies in Finland

The raw water quality and associations between the factors considered as threats to water safety were studied in 20 groundwater supplies in central Finland in 2002-2004. Faecal contaminations indicated by the appearance of Escherichia coli or intestinal enterococci were present in five small community water supplies, all these managed by local water cooperatives. Elevated concentrations of nutrients in raw water were linked with the presence of faecal bacteria. The presence of on-site technical hazards to water safety, such as inadequate well construction and maintenance enabling surface water to enter into the well and the insufficient depth of protective soil layers above the groundwater table, showed the vulnerability of the quality of groundwater used for drinking purposes. To minimize the risk of waterborne illnesses, the vulnerable water supplies need to be identified and appropriate prevention measures such as disinfection should be applied.     

Occurrence of PCDD/F, PCB, PBDE, PFAS, and organotin compounds in fish meal, fish oil and fish feed

We analysed polychlorinated dibenzo-p-dioxins and furans (PCDD/F, dioxins), and polychlorinated biphenyls (PCB) in 13 fish meal, five fish oil, and seven fish feed samples. Polybrominated diphenyl ethers (PBDE), organotin compounds (OTC), and perfluoroalkylated substances (PFAS) were analysed in ten fish meal, two fish oil, and two fish feed samples. All measured TEQ concentrations of PCDD/F and PCB were below the maximum levels set by Directive 2002/32/EC. There was no correlation between concentrations of WHOPCDD/F-TEQ and indicator PCB in our samples. The most common congeners among PBDEs were BDE-47 and BDE-100. BDE-209 was present in five fish meals of the ten analysed. Tributyltin (TBT) was the predominant congener in all samples except in three fish meals, where monobutyltin (MBT) was the major congener. Perfluorooctane sulphonate (PFOS) was the predominant congener in six fish meals of the ten analysed. There was large variation in concentrations and congener distributions of the studied compounds between our samples. Our results underline a need to pay special attention to the origin and purity of feed raw material of marine origin.     

Still present after all these years: persistence plus potential toxicity raise questions about the use of atrazine

As one of the worlds’ most heavily applied herbicides, atrazine is still a matter of controversy. Since it is regularly found in ground and drinking water, as well as in sea water and the ice of remote areas, it has become the subject of continuous concern due to its potential endocrine and carcinogenic activity. Current findings prove long-held suspicions that this compound persists for decades in soil. Due to the high amount applied annually all over the world, the soil burden of this compound is considered to be tremendous, representing a potential long-term threat to the environment. The persistence of chemicals such as atrazine has long been underestimated: Do we need to reconsider the environmental risk?     

Concentrations and diversity of microbes from four local bioaerosol emission sources in Finland

Microbial particles can readily be released into the air from different types of man-made sources such as waste operations. Microbiological emissions from different biological sources and their dispersion may be an issue of concern for area planning and for nearby residents. This study was designed to determine the concentrations and diversity of microbiological emissions from four different man-made source environments: waste center with composting windrows, sewage treatment plant, farming environment, and cattle manure spreading. Samples of airborne particles were collected onto polyvinyl chloride filters at three distances along the prevailing downwind direction, from each source environment during a period of approximately 1 week. These samples were analyzed for 13 species or assay groups of fungi, bacterial genus Streptomyces, and Gram-positive and -negative bacteria using quantitative polymerase chain reaction (PCR). Samples for determining the concentrations of viable fungi and bacteria were collected from all environments using a six-stage impactor. The results show that there were variations in the microbial diversity between the source environments. Specifically, composting was a major source for the fungal genera Aspergillus and Penicillium, particularly for Aspergillus fumigatus, and for the bacterial genus Streptomyces. Although the microbial concentrations in the sewage treatment plant area were significantly higher than those at 50 or 200 m distance from the plant area, in the farming environment or cattle manure spreading area, no significant difference was observed between different distances from the source. In summary, elevated concentrations of microbes that differ from background can only be detected within a few hundred meters from the source. This finding, reported earlier for culturable bacteria and fungi, could thus be confirmed using molecular methods that cover both culturable and nonculturable microbial material.     

An analysis of seismic risk from a tourism point of view

Global awareness of natural calamities increased after the destructive Indian Ocean tsunami of December 2004, largely because many foreigners lost their lives, especially in Thailand. This paper explores how best to communicate the seismic risk posed by different travel destinations to crisis management personnel in tourists' home countries. The analysis of seismic risk should be straightforward enough for non-specialists, yet powerful enough to identify the travel destinations that are most at risk. The output for each location is a point in 3D space composed of the natural and built-up environment and local tourism. The tourism-specific factors can be tailored according to the tourists' nationality. The necessary information can be collected from various directories and statistics, much of it available over the Internet. The output helps to illustrate the overall seismic risk conditions of different travel destinations, allows for comparison across destinations, and identifies the places that are most at risk.     

Trophic transfer of pyrene metabolites and nonextractable fraction from Oligochaete (Lumbriculus variegatus) to juvenile brown trout (Salmo trutta)

Cell lines of Etroplus suratensis established in our laboratory were evaluated for their potential use as screening tools for the ecotoxicological assessment of tannery effluent. The cytotoxic effect of tannery effluent in three cell lines derived from eye, kidney and gill tissue of E. suratensis was assessed using multiple endpoints such as Neutral Red (NR) assay, Coomassie Blue (CB) protein assay and Alamar Blue (AB) assay. Acute toxicity tests on fish were conducted by exposing E. suratensis for 96 h to tannery effluent under static conditions. The toxic effect of tannery effluent on the survival of fish was found to be concentration and time dependent. The tannery effluent at the concentration of 15% caused 100% mortality at 96 h whereas the lower concentration (0.5%) caused 13.33% mortality. The cytotoxicity of tannery effluent was found to be similar in the three cell lines tested, independent of the toxic endpoints employed. EC₅₀ values, the effective concentration of tannery effluent resulting in 50% inhibition of cytotoxicity parameters after 48 h exposure to tannery effluent were calculated for eye, kidney and gill cell lines using NR uptake, AB and cell protein assays. Statistical analysis revealed good correlation with r² = 0.95-0.99 for all combinations between endpoints employed. Linear correlations between each in vitro EC₅₀ and the in vivo LC₅₀ data, were highly significant p < 0.001 with r² = 0.977, 0.968 and 0.906 for AB₅₀, NR₅₀, and CB₅₀, respectively.