Seaweed sex pheromones and their degradation products frequently suppress amphipod feeding but rarely suppress sea urchin feeding

Summary. A diverse group of brown seaweeds produce bouquets of C₁₁ metabolites, some of which act as pheromones that cue gamete release or attract sperm to eggs following release. We demonstrate that these C₁₁ metabolites and their degradation products also frequently and strongly deter feeding by the herbivorous amphipod Ampithoe longimana, but rarely by the herbivorous sea urchin Arbacia punctulata. Across the range of concentrations tested, seven of twelve C₁₁ metabolites or mixtures that we tested deterred feeding by the amphipod, but only two of eleven deterred the sea urchin. For those compounds where we could rigorously contrast the magnitude of deterrence against the amphipod with the magnitude of deterrence against the urchin, the amphipod was deterred significantly more than the urchin by five of six metabolites. Thus, C₁₁ compounds were more frequently and more strongly deterrent to the amphipod than to the sea urchin. These findings for C₁₁ metabolites conflict with previous investigations, where other classes of seaweed chemical defenses have been shown to deter feeding by large mobile herbivores like urchins and fishes but to be relatively ineffective against mesograzers, especially the species of amphipod that we used here. Our results suggest that C₁₁ metabolites are unusual among the known seaweed chemical defenses in that they are especially effective against mesograzers, which often consume seaweed spores, zygotes, and juveniles. The high concentrations of C₁₁ metabolites in brown algal eggs could allow these defenses to be especially important in defending gametes, zygotes, or young sporelings from herbivorous mesograzers. Received 26 February 1998; accepted 9 April 1998.     

Management of basiphilous dune slack communities in relation to carbonate accumulation and hydrological conditions

In dune slacks in The Netherlands, a decline of rare mesotrophic basiphilous plant species and their plant communities has been observed in combination with an increase of more productive systems with common, taller acidophilous plant species. This has been attributed to both natural and anthropogenic changes. In a humid climate with a precipitation surplus, as in The Netherlands, the calcium carbonate content of a calcareous soil increases with depth. However, soils in coastal dune slacks, may have a higher carbonate content in the topsoil horizon than in the underlying layers. Carbonates which buffer the pH can prolong the presence of mesotrophic basiphilous plant communities which are of high conservation value. To explain the occurrence of calcareous surface horizons in dune slacks, hydrological and micromorphological analyses were carried out in three dune slacks. Two slacks are situated on the Wadden Sea islands in the northern part of The Netherlands; one on Schiermonnikoog and one on Texel. The third slack is situated in the dunes on the island of Goeree in the southwestern part of The Netherlands. In all three slacks, carbonate occurs as mollusc and gastropod fragments (silt- or sand-sized) and as micritic nodules in the topsoil layer, due to aeolian deposition and sedimentation by water.In situ carbonate accumulation (calcitans and calcareous crusts) due to CO₂ release in inundated and/or capillary rise of calcareous groundwater near, or at the soil surface. Accumulation of carbonate also occurs as a result of biological activity by algae in the topsoil of the Goeree site. In general, hydrological processes maintaining high levels of calcareous groundwater are a prerequisite for the maintenance of high carbonate levels in topsoils. Such levels are necessary for the conservation and management of basiphilous pioneer vegetation.     

Comparison of Point Estimation Techniques in the Spatial Analysis of Radium-226, Radium-228 and Potassium-40 in Soil

Many environmental surveys require the implementation of estimation techniques to determine the spatial distribution of the variable being investigated. Traditional methods of interpolation and estimation, for example, inverse distance squared and triangulation often ignore features of the data set such as anisotropy which may have a significant impact on the quality of the estimates produced. Geostatistical techniques may offer an improved method of estimation by modelling the spatial continuity of the variable using semi-variogram analysis. The theoretical model fitted to the semi-variogram is then used in the assignation of weighting factors to the samples surrounding the location to be estimated. This paper outlines the results of a comparison between three common estimation methods, polygonal, triangulation and inverse distance squared and a geostatistical method, in the estimation of soil radionuclide activities. The geostatistical estimation method known as kriging performed best over a range of parameters used to test the performance of the methods. Kriging exhibited the best correlation between actual and estimated values, the narrowest error distribution and the lowest overall estimation error. Polygonal estimation was best at reproducing the data set distribution. Conditional bias was evident in all the methods, low values being over-estimated and high values being under-estimated.     

Modelling and assessment of South African elephant Loxodonta africana population persistence

The use of a quantitative population growth model to investigate the persistence of South African elephant populations is explored. The model provides quantitative assessments of population persistence and confidence intervals for estimated parameters based purely on population size estimates. The analysis supports the view that most of the larger populations in the region are secure. This view is further supported by a lack of density dependent effects in most of the recovering populations and the high population rates of increase observed. This predominantly positive prognosis is in contrast with that emerging from most of the rest of the African continent where the populations are under greater threat because of habitat restriction and direct human conflict. This preliminary assessment of elephant population persistence suggests that “viable” populations may lie between 400 and 6000 individuals. Although not inconsistent with information-greedy genetic and demographic models, the relationship between population growth versus genetic and demographic models should be further investigated. The implementation of a metapopulation management strategy towards these smaller populations is advocated. In addition, as all of the populations included in this analysis have been afforded some degree of protection since the 1920s, continued protection would be a prerequisite for their continued survival.     

Anthropogenic lead distribution in soils under arable land and permanent grassland estimated by Pb isotopic compositions

The role of land use on fate of metals in soils is poorly understood. In this work, we studied the incorporation of lead in two neighboring soils with comparable pedogenesis but under long-term different agricultural management. Distributions of anthropogenic Pb were assessed from concentrations and isotopic compositions determined on bulk horizon samples, systematical 5-10 cm increment samples, and on 24-h EDTA extracts. Minor amounts of anthropogenic lead were detected until 1-m depth under permanent grassland, linked to high earthworm activity. In arable land, exogenous Pb predominantly accumulated at depths <60 cm. Although the proximity between the two sites ensured comparable exposition regarding atmospheric Pb deposition, the isotopic compositions clearly showed the influence of an unidentified component for the cultivated soil. This work highlights the need for exhaustive information on historical human activities in such anthropized agrosystems when fate of metal pollution is considered.     

Variation of MCPA, metribuzine, methyltriazine-amine and glyphosate degradation, sorption, mineralization and leaching in different soil horizons

Pesticide mineralization and sorption were determined in 75 soil samples from 15 individually drilled holes through the vadose zone along a 28 km long transect of the Danish outwash plain. Mineralization of the phenoxyacetic acid herbicide MCPA was high both in topsoils and in most subsoils, while metribuzine and methyltriazine-amine was always low. Organic matter and soil pH was shown to be responsible for sorption of MCPA and metribuzine in the topsoils. The sorption of methyltriazine-amine in topsoil was positively correlated with clay and negatively correlated with the pH of the soil. Sorption of glyphosate was tested also high in the subsoils. One-dimensional MACRO modeling of the concentration of MCPA, metribuzine and methyltriazine-amine at 2 m depth calculated that the average concentration of MCPA and methyltriazine-amine in the groundwater was below the administrative limit of 0.1 μg/l in all tested profiles while metribuzine always exceeded the 0.1 μg/l threshold value.     

Seasonal and spatial occurrence and distribution of atmospheric polycyclic aromatic hydrocarbons (PAHs) in rural and urban areas of the North Chinese Plain

Passive air sampling (PAS) was employed to study the occurrence of gaseous and particle-bound PAHs in the North Chinese Plain. The averaged concentrations of gaseous and particle-bound PAHs were 485 ± 209 ng/m³ and 267 ± 161 ng/m³, respectively. The PAHs concentrations at urban sites were generally higher than those at rural ones with ratios <1.5 in spring, summer and fall, but differences between them were not significant for the wintertime and annually averaged concentrations. This urban-rural distribution pattern was related to the PAHs emission sources. PAHs spatial variation can be partially (49%) explained by emission with a simple linear regression method. Both the gaseous and particle-bound PAHs were highest in winter and lowest in summer, with winter/summer ratios of 1.8 and 8, respectively. Emission strength was the most important factor for the seasonality.     

Bioenergy to save the world

BACKGROUND AND AIM: Following to the 2006 climate summit, the European Union formally set the goal of limiting global warming to 2 degrees Celsius. But even today, climate change is already affecting people and ecosystems. Examples are melting glaciers and polar ice, reports about thawing permafrost areas, dying coral reefs, rising sea levels, changing ecosystems and fatal heat periods. Within the last 150 years, CO2 levels rose from 280 ppm to currently over 400 ppm. If we continue on our present course, CO2 equivalent levels could approach 600 ppm by 2035. However, if CO2 levels are not stabilized at the 450-550 ppm level, the consequences could be quite severe. Hence, if we do not act now, the opportunity to stabilise at even 550 ppm is likely to slip away. Long-term stabilisation will require that CO2 emissions ultimately be reduced to more than 80% below current levels. This will require major changes in how we operate. RESULTS: Reducing greenhouse gases from burning fossil fuels seems to be the most promising approach to counterbalance the dramatic climate changes we would face in the near future. It is clear since the Kyoto protocol that the availability of fossil carbon resources will not match our future requirements. Furthermore, the distribution of fossil carbon sources around the globe makes them an even less reliable source in the future. We propose to screen crop and non-crop species for high biomass production and good survival on marginal soils as well as to produce mutants from the same species by chemical mutagenesis or related methods. These plants, when grown in adequate crop rotation, will provide local farming communities with biomass for the fermentation in decentralized biogas reactors, and the resulting nitrogen rich manure can be distributed on the fields to improve the soil. DISCUSSION: Such an approach will open new economic perspectives to small farmers, and provide a clever way to self sufficient and sustainable rural development. Together with the present economic reality, where energy and raw material prices have drastically increased over the last decade, they necessitate the development and the establishment of alternative concepts. CONCLUSIONS: Biotechnology is available to apply fast breeding to promising energy plant species. It is important that our valuable arable land is preserved for agriculture. The opportunity to switch from low-income agriculture to biogas production may convince small farmers to adhere to their business and by that preserve the identity of rural communities. PERSPECTIVES: Overall, biogas is a promising alternative for the future, because its resource base is widely available, and single farms or small local cooperatives might start biogas plant operation.     

Levels of perfluorochemicals in water samples from Catalonia,Spain: is drinking water a significant contribution to human exposure?

Background, aim, and scope  In recent years, due to a high persistence, biomagnification in food webs, presence in remote regions, and potential toxicity, perfluorochemicals (PFCs) have generated a considerable interest. The present study was aimed to determine the levels of perfluorooctane sulfonate (PFOS), perfluorooctanoic acid (PFOA), and other PFCs in drinking water (tap and bottled) and river water samples from Tarragona Province (Catalonia, Spain). Materials and methods  Municipal drinking (tap) water samples were collected from the four most populated towns in the Tarragona Province, whereas samples of bottled waters were purchased from supermarkets. River water samples were collected from the Ebro (two samples), Cortiella, and Francolí Rivers. After pretreatment, PFC analyses were performed by HPLC-MS. Quantification was done using the internal standard method, with recoveries between 68% and 118%. Results  In tap water, PFOS and PFOA levels ranged between 0.39 and 0.87 ng/L (0.78 and 1.74 pmol/L) and between 0.32 and 6.28 ng/L (0.77 and 15.2 pmol/L), respectively. PFHpA, PFHxS, and PFNA were also other detected PFCs. PFC levels were notably lower in bottled water, where PFOS could not be detected in any sample. Moreover, PFHpA, PFHxS, PFOA, PFNA, PFOS, PFOSA, and PFDA could be detected in the river water samples. PFOS and PFOA concentrations were between <0.24 and 5.88 ng/L (<0.48 and 11.8 pmol/L) and between <0.22 and 24.9 ng/L (<0.53 and 60.1 pmol/L), respectively. Discussion  Assuming a human water consumption of 2 L per day, the daily intake of PFOS and PFOA by the population of the area under evaluation was calculated (0.78–1.74 and 12.6 ng, respectively). It was found that drinking water might be a source of exposure to PFCs as important as the dietary intake of these pollutants. Conclusions  The contribution of drinking water (tap and bottled) to the human daily intake of various PFCs has been compared for the first time with data from dietary intake of these PFCs. It was noted that in certain cases, drinking water can be a source of exposure to PFCs as important as the dietary intake of these pollutants although the current concentrations were similar or lower than those reported in the literature for surface water samples from a number of regions and countries. Recommendations and perspectives  Further studies should be carried out in order to increase the knowledge of the role of drinking water in human exposure to PFCs.     

An Automated Technique for Delineating and Characterizing Valley-Bottom Settings

Accurate delineation and characterization of valley-bottom settings is crucial to the assessment of the biological and geomorphological components of riverine systems; yet, to date, most valley-bottom mapping endeavors have been done manually. To improve this situation, we developed automated techniques in a Geographic Information System (GIS) for delineating and characterizing valley-bottom settings in river basins ranging in size from approximately 1,000–10,000 km². All procedures were developed with ARC/INFO GIS software and fully automated in Arc Macro Language (AML). The GRID module is required for valley-bottom delineation and slope calculations; whereas characterization (i.e., measuring the width of the valley-bottom zone) requires Coordinate Geometry (COGO) in the ARCEDIT module. The process requires three inputs: a polygon coverage of the analysis area; an arc coverage of its hydrography, and a grid representing its digital elevation. The AML is designed to operate within a wide range of computer memory/disk space options, and it allows users to customize several procedures to match the scale and complexity of a given analysis area with available computer hardware.