Promoting the use of environmental data collected by concerned citizens through information and communication technologies

Public participation within environmental monitoring may contribute to increasing the knowledge on the state of the environment at the same time it promotes citizens' involvement in environmental protection. However, the use of voluntary collected data is limited due to a lack of confidence in data collection procedures. Additionally, data quality is often unknown and the data are usually dispersed and non-structured. Information and communication technologies (ICT) may promote the use of voluntary collected data through the development of a collaborative system that incorporates tools and methodologies to facilitate data collection, access and validation. Furthermore, the use of ICT may promote public involvement within environmental monitoring, since it facilitates communication among all the stakeholders. This paper analyses the role of ICT in developing a system for environmental collaborative monitoring intending to promote the use of volunteer collected data. It starts by analysing the role of volunteers within environmental monitoring and continues analysing the potential of ICT to take advantage of the benefits of using data collected by citizens. A collaborative system that allows the public to express its knowledge on the state of the environment is described. Special emphasis is given to tools that explore non-traditional types of environmental data such as images, sounds and videos in association with spatial information. To illustrate the above mentioned concepts, a case study for beach quality monitoring developed within the Senses@Watch project, is described.     

The Management of a Large Mediterranean Reservoir: Storage Regimens of the Yesa Reservoir,Upper Aragon River Basin,Central Spanish Pyrenees

Agriculture in Mediterranean countries is mainly based upon the irrigation of productive areas in the lowlands. For this reason, it is necessary to store large volumes of water in reservoirs located in mountain headwaters. These reservoirs have a relatively simple regimen of storage, increasing the water stored during the wet season (from October until May) and reaching the maximum volume shortly before the beginning of the hot, very dry season, when the water is released. This paper considers the storage regimen (inflow and outflow) of the Yesa Reservoir in the Spanish Pyrenees as an example of management of a large reservoir in a mountain Mediterranean environment, subject to a strong interannual variability. On average, the highest water storage level is achieved by retaining the high flows of the Aragón River in autumn and spring. Nevertheless, the irregularity of rainfalls and the existence of changes in the hydrological regimen lead to changes in the patterns of reservoir filling. Two patterns were identified in the Yesa Reservoir: (1) a quick increase of the stored volume in autumn, a stabilization in winter, and a new increase in spring; and (2) a continuous increase from October until May. These patterns are distributed in time over different periods since the construction of the reservoir in 1959, demonstrating the adjustment of the reservoir management to changes in the hydrological regimen.     

Ostracoda and foraminifera as short-term tracers of environmental changes in very polluted areas: the Odiel Estuary (SW Spain)

The analysis of 17 cores collected in the Odiel Estuary (SW Spain) permits delimiting the recent evolution of this zone during the past decades and the influence of natural and anthropogenic factors on the distribution of Ostracoda and Foraminifera. In the upper estuary, the coincidence of acid waters, prolonged subaerial exposure, and coarse sediments may explain the absence or the disappearance of these microorganisms during the industrial period (1966-1985) in the major part of this area. In the lower estuary, sedimentary evolution and industrial wastes are the main factors influencing both the distribution and trends of the populations of these two groups. Finally, the main changes observed in the marine estuary are due to the sedimentary effects of the construction of two banks and the dredging of the main estuarine channel.     

Use of sequential extraction to assess the influence of sewage sludge amendment on metal mobility in Chilean soils

In Chile, the increasing number of plants for the treatment of wastewater has brought about an increase in the generation of sludge. One way of sludge disposal is its application on land; this, however involves some problems, some of them being heavy metal accumulation and the increase in organic matter and other components from sewage sludge which may change the distribution and mobility of heavy metals. The purpose of the present study was to determine the effect of sewage sludge application on the distribution of Cr, Ni, Cu, Zn and Pb in agricultural soils in Chile. Three different soils, two Mollisols and one Alfisol, were sampled from an agricultural area in Central Chile. The soils were treated with sewage sludge at the rates of 0 and 30 ton ha(-1), and were incubated at 25 degrees C for 45 days. Before and after incubation, the soils were sequentially extracted to obtain labile (exchangeable and sodium acetate-soluble), potentially labile (soluble in moderately reducing conditions, K4P2O7-soluble and soluble in reducing conditions) and inert (soluble in strong acid oxidizing conditions) fractions. A two-level factored design was used to assess the effect of sludge application rate, incubation time and their interaction on the mobility of the elements under study. Among the metals determined in the sludge, zinc has the highest concentration. However, with the exception of Ni, the total content of metals was lower than the recommended limit values in sewage sludge as stated by Chilean regulations. Although 23% of zinc in sludge was in more mobile forms, the residual fraction of all metals was the predominant form in soils and sludge. The content of zinc only was significantly increased in two of the soils by sewage sludge application. On the other hand, with the exception of copper, the metals were redistributed in the first four fractions of amended soils. The effect of sludge application rate, incubation time and their interaction depended on the metal or soil type. In most cases an increase in more mobile forms of metals in soils was observed as the final effect.     

Prediction of trace element mobility in contaminated soils by sequential extraction

The modified three-step sequential extraction procedure proposed by the Community Bureau of Reference (or Bureau Communautaire de Reference, BCR) was used to predict trace element mobility in soils affected by an accidental spill comprising arsenopyrite- and heavy metal-enriched sludge particles and acid waste waters. The procedure was used to obtain the distribution of both the major (Al, Ca, Fe, Mg, and Mn) and trace elements (As, Bi, Cd, Cu, Pb, Tl, and Zn) in 13 soils of contrasting properties with various levels of contamination and in the sludge itself. The distributions of the major elements enabled us to confirm the main soil fractions solubilized in each of the three steps, and, in turn, to detect the presence of pyritic sludge particles by the high Fe extractability obtained in the third step. Cadmium was identified as being the most mobile of the elements, having the highest extractability in the first step, followed by Zn and Cu, Lead, Tl, Bi, and As were shown to be poorly mobile or nonmobile. In the case of some of the trace elements, the residual fractions decreased at higher levels of contamination, which was attributed to the anthropogenic contributions to the polluted samples. Comparison with soil-plant transfer factors, calculated in plants growing in the affected area, indicated that a relative sequence of trace element mobility was well predicted from data of the first step.     

Contribution of particulate phosphorus to runoff phosphorus bioavailability

Runoff P associated with eroded soil is partly solubilized in receiving waters and contributes to eutrophication, but the significance of particulate phosphorus (PP) in the eutrophying P load is debatable. We assessed losses of bioavailable P fractions in field runoff from fine-textured soils (Cryaquepts). Surface runoff at four sites and drain-flow at two of them was sampled. In addition to dissolved molybdate-reactive phosphorus (DRP) losses, two estimates of bioavailable PP losses were made: (i) desorbable PP, assessed by anion exchange resin-extraction (AER-PP) and (ii) redox-sensitive PP, assessed by extraction with bicarbonate and dithionite (BD-PP). Annual losses of BD-PP and AER-PP were derived from the relationships (R2 = 0.77-0.96) between PP and these P forms. Losses of BD-PP in surface runoff (94-1340 g ha(-1)) were typically threefold to fivefold those of DRP (29-510 kg ha(-1)) or AER-PP (13-270 g ha(-1)). Where monitored, drainflow P losses were substantial, at one of the sites even far greater than those via the surface pathway. Typical runoff DRP concentration at the site with the highest Olsen-P status (69-82 mg kg(-1)) was about 10-fold that at the site with the lowest Olsen P (31-45 mg kg(-1)), whereas the difference in AER-PP per mass unit of sediment was only threefold, and that of BD-PP 2.5-fold. Bioavailable P losses were greatly influenced by PP runoff, especially so on soils with a moderate P status that produced runoff with a relatively low DRP concentration.     

Methane emissions of rice increased by elevated carbon dioxide and temperature

Methane (CH4) effluxes by paddy-culture rice (Oryza sativa L.) contribute about 16% of the total anthropogenic emissions. Since radiative forcing of CH4 at current atmospheric concentrations is 21 times greater on a per mole basis than that of carbon dioxide (CO2), it is imperative that the impact of global change on rice CH4 emissions be evaluated. Rice (cv. IR72) was planted in sunlit, closed-circulation, controlled-environment chambers in which CH4 efflux densities were measured daily. The CO2 concentration was maintained at either 330 or 660 micromol mol(-1). Air temperatures were controlled to daily maxima and minima of 32/23, 35/26, and 38/29 degrees C at each CO2 treatment. Emissions of CH4 each day were determined during a 4-h period after venting and resealing the chambers at 0800 h. Diurnal CH4 effluxes on 77, 98, and 119 d after planting (DAP) were obtained similarly at 4-h intervals. Emissions over four-plant hills and over flooded bare soil were measured at 53, 63, and 100 DAP. Emissions were negligible before 40 DAP. Thereafter, emissions were observed first in high-CO2, high-temperature treatments and reached a sustained maximum efflux density of about 7 mg m(-2) h(-1) (0.17 g m(-2) d(-1)) near the end of the growing season. Total seasonal CH4 emission was fourfold greater for high-CO2, high-temperature treatments than for the low-CO2, low-temperature treatment, probably due to more root sloughing or exudates, since about sixfold more acetate was found in the soil at 71 DAP. Both rising CO2 and increasing temperatures could lead to a positive feedback on global warming by increasing the emissions of CH4 from rice.     

Determination of potentially bioaccumulating complex mixtures of organochlorine compounds in wastewater: a review

Organic chlorine compounds can be persistent environmental contaminants and may be accumulated through the food chain to the aquatic organisms, to fish and humans, depending basically on their hydrophobic properties. Consequently, there is an interest to measure these organic compounds from both the scientific and regulatory communities. The analytical essays have been improved for measuring specific organic chlorine compounds that present the most toxicological potential (polychlorinated biphenyls [PCBs], certain pesticides and dioxins), although they are tedious and time-consuming procedures. The existing tests to measure adsorbable organic halogens (AOX) or extractable organic halogens (EOX) do not distinguish the more hydrophobic organic chlorine matter. The intention of this paper is to make a review of the existing methods to measure the potentially bioaccumulating organochlorine compounds (OCs) from wastewater and propose a methodology to a standardisation procedure for complex mixtures of OCs in wastewater, such as pulp mill effluents. A new method has been proposed for determining the most hydrophobic part of the extractable organic halogens (EOX(fob)), the lowest reported value is 0.6 microg/l, expressed as chloride, and the relative standard deviation at 20 microg/l is 7% on laboratory samples and 30% on real effluents. This new procedure could be a valuable tool to complement environmental risk assessment studies of wastewater discharges.