Stochastic modeling of diffuse pesticide losses from a small agricultural catchment

The objective of this study was to identify the main sources of variation in pesticide losses at field and catchment scales using the dual permeability model MACRO. Stochastic simulations of the leaching of the herbicide MCPA (4-chloro-2-methylphenoxyacetic acid) were compared with seven years of measured concentrations in a stream draining a small agricultural catchment and one year of measured concentrations at the outlet of a field located within the catchment. MACRO was parameterized from measured probability distributions accounting for spatial variability of soil properties and local pedotransfer functions derived from information gathered in field- and catchment-scale soil surveys. At the field scale, a single deterministic simulation using the means of the input distributions was also performed. The deterministic run failed to reproduce the summer outflows when most leaching occurred, and greatly underestimated pesticide leaching. In contrast, the stochastic simulations successfully predicted the hydrologic response of the field and catchment and there was a good resemblance between the simulations and measured MCPA concentrations at the field outlet. At the catchment scale, the stochastic approach underestimated the concentrations of MCPA in the stream, probably mostly due to point sources, but perhaps also because the distributions used for the input variables did not accurately reflect conditions in the catchment. Sensitivity analyses showed that the most important factors affecting MACRO modeled diffuse MCPA losses from this catchment were soil properties controlling macropore flow, precipitation following application, and organic carbon content.     

Workers' involvement--a missing component in the implementation of occupational safety and health management systems in enterprises.

Effective implementation of occupational safety and health (OSH) legislation based on European Union directives requires promotion of OSH management systems (OSH MS). To this end, voluntary Polish standards (PN-N-18000) have been adopted, setting forth OSH MS specifications and guidelines. However, the number of enterprises implementing OSH MS has increased slowly, falling short of expectations, which call for a new national policy on OSH MS promotion. To develop a national policy in this area, a survey was conducted in 40 enterprises with OSH MS in place. The survey was aimed at identifying motivational factors underlying OSH MS implementation decisions. Specifically, workers' and their representatives' involvement in OSH MS implementation was investigated. The results showed that the level of workers' involvement was relatively low, which may result in a low effectiveness of those systems. The same result also applies to the involvement of workers' representatives and that of trade unions.     

Soil erosion under different vegetation covers in the Venezuelan Andes

This comparative study of soil erosion considered different environments in an ecological unit of the Venezuelan Andes. The soils belong to an association of typic palehumults and humic dystrudepts. Soil losses were quantified by using erosion plots in areas covered by four types of vegetation, including both natural and cultivated environments. The highest soil erosion rate evaluated corresponded to horticultural crops in rotation: reaching a value of 22 Mg ha^–1 per year. For apple tree (Malus sylvestris Miller) plots, soil losses reached values of 1.96 Mg ha^–1 per year. Losses from pasture (Pennisetum clandestinum Hochst. ex Chiov.) plots, without livestock grazing, were as high as 1.11 Mg ha^–1 during the second year of the experiment. The highest soil losses generated from plots under natural forest were equal to 0.54 Mg ha^–1 per year. Environmental factors such as total and effective rainfall, runoff, and some soil characteristics as those related to soil losses by water erosion were evaluated. The type of management applied to each site under different land use type and the absence of conservation practices explain, to a large extent, the erosive processes and mechanisms.     

Comparison of periphytic biofilm and filter-feeding bivalve metal bioaccumulation (Cd and Zn) to monitor hydrosystem restoration after industrial remediation: a year of biomonitoring

Despite a significant decrease in the metallic waste emissions from an industrial site and a remediation process initiated in 2007, the Riou-Mort watershed (southwest France) still exhibits high Cd and Zn concentrations. Metal wastes have long been proven to significantly disturb aquatic communities. In this study, bioaccumulation capacities and responses to the chemical improvement of the hydrosystem were assessed for a year along the contamination gradient through the comparison of two biological models: Corbicula fluminea and periphytic biofilms, both considered as good bioindicators. Bioaccumulation results confirmed the persistence of water contamination in Corbicula fluminea and biofilms with, respectively, maximum Cd concentrations reaching 80.6 and 861.2 μg gDW(-1), and Zn concentrations 2.0 and 21.3 mg gDW(-1). Biofilms exhibited bioaccumulation in close correlation with water contamination, while Corbicula fluminea presented Cd bioaccumulation clearly regulated by water temperature and metal concentrations, affecting the ventilatory activity, as revealed by condition indices measurements. Also, a linear regression using Cd bioaccumulation and temperature () showed that below approximately 6 °C Corbicula fluminea did not appear to accumulate metals. Bioconcentration factors (BCFs) were higher in biofilms in comparison with Corbicula fluminea and showed the great accumulation capacity of suspended particulate matter in biofilms. However, bioaccumulation capacities are known to be influenced by many factors other than metal concentrations, such as temperature, water oxygenation or plankton and nutrient concentrations. Thus, this study demonstrates the power of a combined assessment using both Corbicula fluminea and biofilms as bioindicators to give a more integrated view of water quality assessment. Finally, when comparing our results with previous studies, the start of hydrosystem restoration could be shown by decreasing bioaccumulation in organisms.     

Modified CDKN2B (p15) and CDKN2A (p16) DNA methylation profiles in urban pesticide applicators

Environmental Science and Pollution Research - Gene-specific changes in DNA methylation by pesticides in occupationally exposed populations have not been studied extensively. Of particular concern...     

Respiratory health assessment and exposure to polycyclic aromatic hydrocarbons in Mexican indigenous population

Environmental Science and Pollution Research - Indoor air pollution is an important risk factor for the generation of lung diseases in developing countries. The indigenous population is...     

Mechanical properties and microstructure of cement mortars incorporating Cd-zeolitized fly ash

Journal of Material Cycles and Waste Management - A solid enriched with NaA zeolite was synthesized from a coal fly ash, and the so-obtained zeolitized material was used as ion exchanger for...     

Numerical Modeling of the Impact of a Pumped-Storage Hydroelectric Power Plant on the Reservoirs’ Thermal Stratification Structure: a Case Study in NW Spain

Pumped-storage hydroelectric power plants are generally perceived as an environmentally respectful technology. Nevertheless, the pumping of water from a lower reservoir to an upper impoundment, and the return of that water during power generation, can strongly affect the water quality of the reservoirs. In particular, plant operation can alter their thermal structure, deep water mixing, and water circulation characteristics. The objective of this study is to quantify, through the use of 3D hydrodynamic modeling, the potential impacts of a pumped-storage hydroelectric plant on the thermal stability and mixing of two reservoirs in Galicia, northwest of Spain. To this end, three-dimensional hydrodynamic simulations were conducted using the model Delft3D. Two different coupled models, one for each reservoir, were constructed and subsequently tested for several stratification scenarios, according to measured temperature profiles during the spring and summer season. Several reservoir minimum and maximum operation water levels were also considered. Model simulations demonstrated a high level of mixing in the vicinity of the intake-outlet structures, in particular during startup of the power plant, regardless of the water level in the reservoir. Beyond this area, the results showed a limited overall effect on stratification and mixing in the upper reservoir, owing to the relation between the inflow temperatures and the initial temperature profile of this reservoir. A more significant alteration of the thermal structure is expected in the lower reservoir due to its narrow shape and shallow depth at the structure location, as well as the temperature differences between receiving waters and inflow.     

Infrared thermography reveals effect of working posture on skin temperature in office workers

Introduction. Musculoskeletal symptoms related to using traditional computer workstations are common. Quantitative methods for measuring muscle stress and strain are needed to improve ergonomics of workstations. We hypothesize that infrared thermography (IRT) is suited for this purpose. Methods. This hypothesis was evaluated by estimating muscle activity in upright and traditional working postures with IRT and surface electromyography (sEMG). IRT and sEMG measurements were conducted in 14 female participants with both working postures. First, measurements with the traditional posture were performed. Later, participants had 1?month to adjust to the upright working posture before repeating the measurements. IRT images were acquired before and after a full working day, with sEMG recordings being conducted throughout the measurement days. Participants evaluated their neck pain severity using neck disability index (NDI) questionnaires before the first and after the second measurement day. Results. Spatial variation in upper back temperature was higher (p?=?0.008) when working in traditional posture and the upright working posture reduced (p?p?=?0.003) after working in the upright posture. Conclusion. IRT was found suitable for evaluating muscle activity and upright working posture to reduce the NDI and muscle activity in the upper back.