Potential correlation between perfluorinated acids and liver morphology in East Greenland polar bears (Ursus maritimus)

In this study, residual concentrations of chlorpyrifos (CPF) were determined in feed (40) and fodder (25) samples collected from various locations of Tarai region of Uttarakhand. For extracting residues, liquid–liquid partition followed by alumina column clean up was used and the detection and quantification of residues was undertaken with the help of high-performance liquid chromatography using C18 column and diode array detector at 220?nm. Of the total 40 feed samples analyzed, 7 (17.5%) samples were found positive for CPF with the mean residual concentration of 0.058?µg?g^?1; while out of 25 fodder samples, CPF residues were detected in a single (4%) sample with residual concentration of 0.39?µg?g^?1. However, none of the feed or fodder samples contained CPF residues above the prescribed limit.     

Effect of chromium on the fatty acid composition of two strains of Euglena gracilis

The effect of hexavalent chromium on fatty acid composition was studied in two strains of Euglena gracilis; UTEX 753 (from the Culture Collection of Algae of Texas University, USA) and MAT (isolated from a highly polluted River). Both were grown in photoauxotrophic and photoheterotrophic conditions and exposed to two metal concentrations, one below and one above IC50. The high malondialdehyde (MDA) levels (3 to 7-fold) obtained with chromium concentration above IC50, suggested the existence of metal-induced lipid peroxidation. Total lipid content increased only with concentration below IC50, whereas it was inhibited by higher metal concentration. Photoheterotrophic control strains exhibited a significantly higher proportion of saturated and polyunsaturated fatty acids. Polyunsaturated acids were most affected by chromium, especially those related to chloroplast structures. Ultra-structure studies showed clear thylakoid disorganization in all treated cells. The results indicate that hexavalent chromium affects levels of fatty acids, especially those related to photosynthetic activity.     

Trace element concentrations in soils along urbanization gradients in the city of Wien, Austria

Urban soil is an important component of urban ecosystems. This study focuses on heavy metal contamination in soils of Wien (Austria) and results are compared to those for a few large European cities. We analysed the elemental contents of 96 samples of topsoil from urban, suburban and rural areas in Wien along a dynamic (floodplain forest) and a stable (oak–hornbeam forest) urbanization gradient. The following elements were quantified using ICP-OES technique: Al, As, Ba, Ca, Cd, Co, Cr, Cu, Fe, K, Mg, Mn, Pb, P, S and Zn. For heavy metals PI (pollution index) values were used to assess the level of pollution. The PI values indicated high level of pollution by Pb in the suburban and rural area of stable gradient and in the urban area of dynamic gradient; moderate level of pollution was indicated for Cd in the urban area of stable gradient. The level of pollution was moderate for Co in the suburban and rural area of the stable gradient, and for Cu in suburban area of stable gradient, and urban area of dynamic gradient. The pollution level of Zn was moderate in all areas. Urban soils, especially in urban parks and green areas may have a direct influence on human health. Thus, the elemental analysis of soil samples is one of the best ways to study the effects of urbanization. Our results indicated that the heavy metal contamination was higher in Wien than in a few large European cities.     

Effects of heavy metals and nitroaromatic compounds on horseradish glutathione S-transferase and peroxidase

Glutathione S-transferase (GST) and peroxidase (POX) activities have a direct relation to the effect of stress on plant metabolism. Changes in the activities of the enzymes were therefore studied. Horseradish hairy roots were treated by selected bivalent ions of heavy metals (HMs) and nitroaromatic compounds (NACs). We have shown differences in GST activity when assayed with substrates 1-chloro-2,4-dinitrobenzene (CDNB) and 1,2-dichloro-4-nitrobenzene (DCNB). The conjugation of DCNB catalysed by GST was inhibited in all roots treated with HMs as compared to non-treated roots, whereas NACs caused induction of the activity in dependence on the exposition time and concentration of compounds. The conjugation of CDNB by GST was not affected to the same extent. The increase of GST activity was determined in cultures treated by nickel (0.1 mM) and diaminonitrotoluenes (DANTs, 0.1 mM) for 6 h, whereas the roots treated by 2,4,6-trinitrotoluene (TNT), 4-amino-2,6-dinitrotoluene (ADNT) and dinitrotoluene (DNT, 1.0 mM) needed 27 h treatment to induce the activity. The POX activity of cultures treated by HMs was inhibited to 17-35% in comparison to non-treated cultures. The POX activity of roots treated by TNT (0.1 and 1.0 mM) for 6 and 27 h and by ADNT (0.1 and 1.0 mM) for 6 h was inhibited. A partial increase of POX activity was measured in roots treated by all NACs for 27 h. The content of oxidized glutathione (GSSG) and reduced glutathione (GSH) in the roots differed significantly. It was followed as a symptom of the stress reaction of the plant metabolism to the effect of NACs and HMs.     

Identification of magnetic particulates in road dust accumulated on roadside snow using magnetic, geochemical and micro-morphological analyses

The aim of this study is to test the applicability of snow surveying in the collection and detailed characterization of vehicle-derived magnetic particles. Road dust extracted from snow, collected near a busy urban highway and a low traffic road in a rural environment (southern Finland), was studied using magnetic, geochemical and micro-morphological analyses. Significant differences in horizontal distribution of mass specific magnetic susceptibility (χ) were noticed for both roads. Multi-domain (MD) magnetite was identified as the primary magnetic mineral. Scanning electron microscope (SEM) analyses of road dust from both roads revealed: (1) angular-shaped particles (diameter ∼1-300 μm) mostly composed of Fe, Cr and Ni, derived from circulation of motor vehicles and (2) iron-rich spherules (d ∼ 2-70 μm). Tungsten-rich particles (d < 2 μm), derived from tyre stud abrasion were also identified. Additionally, a decreasing trend in χ and selected trace elements was observed with increasing distance from the road edge.     

Heterogeneous and homogeneous catalytic ozonation of benzothiazole promoted by activated carbon: kinetic approach

Ozone oxidation combined with activated carbon adsorption (O(3)/AC) has recently started to be developed as a single process for water and wastewater treatment. While a number of aspects of aqueous ozone decomposition are well understood, the importance and relationship between aqueous ozone decomposition and organic contaminant degradation in the presence of activated carbon is still not clear. This study focuses on determining the contribution of homogeneous and heterogeneous reactions to organic contaminants removal in O(3)/AC system. Benzothiazole (BT) was selected as a target organic pollutant due to its environmental concern. A reactor system based on a differential circular flow reactor composed by a 19 cm(3) activated carbon fixed bed column and 1 dm(3) storage tank was used. Ozone was produced from pure and dry oxygen using an Ozocav ozone generator rated at 5 g O(3)h(-1). Experimental results show that BT removal rate was proportional to activated carbon dosage. Activated carbon surface contribution to BT oxidation reactions with ozone, increased with pH in absence of radical scavengers. The radical reaction contribution within the pH range 2-11 accounted for 67-83% for BT removal in O(3)/AC simultaneous treatment. Results suggest that at pH higher than the pH of the point of zero charge of the activated carbon dissociated acid groups such as carboxylic acid anhydrides and carboxylic acids present on activated carbon surface could be responsible for the observed increase in the ozone decomposition reaction rate. A simplified mechanism and a kinetic scheme representing the contribution of homogeneous and heterogeneous reactions on BT ozonation in the presence of activated carbon is proposed.     

Treatment of chromium plating process effluents with ion exchange resins.

The surface treatment industry deals with various heavy metals, including the elements Cr, Zn, Ni, Cd, and Cu. Conventional treatments of effluents generate class I solid residue. The aim of this investigation was to study the viability of ion exchange as an alternative process for treatment of rinse water and to determine the efficacy of two ion exchange systems, System 1: "strong" cationic resin-"strong" anionic resin and System 2: "strong" cationic resin-"weak" anionic resin. Commercial resins and solutions taken from rinse tanks of chromium plating companies were used in this investigation. A two-column system, one for the cationic resin and another for the anionic resin, both with 150 ml capacity was mounted. The solution was percolated at a rate of 10 ml/min. The following solutions were used for regeneration of the resins: 2% H2SO4 for the cationic and 4% NaOH for the anionic. The percolated solutions revealed chromium contents of less than 0.25 mg/l, independent of the system used. The "strong" cationic resin-"weak" anionic resin gave excellent regeneration results. The "strong" cationic-"strong" anionic resin presented problems during regeneration, and did not release the retained ions after percolation of 2000 ml of 4% NaOH solution. It is concluded that for this type of treatment, the system composed of "strong" cationic resin and "weak" anionic resin is more appropriate.     

Comparison of Soil Extraction Isotherms of Soil Samples Saturated With Nonpolar Liquids

In multiphase systems capillary pressures play a significant role on fluid movement and retention. The facility to predict the effect of different thermal remediation strategies requires the knowledge of the effect of temperature on capillary pressure-saturation relationships in the soils. The objective of recent study was (a) to develop a technique for routinely measuring the pressure-saturation curves of soil samples saturated with a nonpolar liquid at different regulated temperatures (b) to build a database using the measured pressure-saturation curves and the physical, chemical properties of the model soils (c) to establish the dependence of nonaqueous phase liquid retention on the soil properties and the temperature. The retention curves (extraction isotherms) with nonaqueous phase liquid were determined using a modified pressure plate extractor. The wetting phase was a non-aromatic hydrocarbon distillation product. Pressure plates were designed and constructed in the laboratory of our department. The temperature was held constant at 20, 40 and 60 ^∘C. Statistical analysis was performed involving selected soil parameters and the measured nonaqueous phase liquid retention data. The results show that knowing some easily measurable soil parameters (bulk density, particle size distribution, humus and lime content) we can estimate the nonaqueous phase liquid retention of the soils. The measured “extraction isotherms” provide essential information about the temperature-dependency of pressure-saturation curves.     

Assessing farming eco-efficiency: a Data Envelopment Analysis approach

This paper assesses farming eco-efficiency using Data Envelopment Analysis (DEA) techniques. Eco-efficiency scores at both farm and environmental pressure-specific levels are computed for a sample of Spanish farmers operating in the rain-fed agricultural system of Campos County. The determinants of eco-efficiency are then studied using truncated regression and bootstrapping techniques. We contribute to previous literature in this field of research by including information on slacks in the assessment of the potential environmental pressure reductions in a DEA framework. Our results reveal that farmers are quite eco-inefficient, with very few differences emerging among specific environmental pressures. Moreover, eco-inefficiency is closely related to technical inefficiencies in the management of inputs. Regarding the determinants of eco-efficiency, farmers benefiting from agri-environmental programs as well as those with university education are found to be more eco-efficient. Concerning the policy implications of these results, public expenditure in agricultural extension and farmer training could be of some help to promote integration between farming and the environment. Furthermore, Common Agricultural Policy agri-environmental programs are an effective policy to improve eco-efficiency, although some doubts arise regarding their cost-benefit balance.     

Carbon footprint in corporate logistics operations in the food sector

Global warming is negatively affecting the environment of the planet. This situation has led to the development of international standards, such as the International Organisation for Standardization's DIS 14064‐1 and the Greenhouse Gas Protocol Corporate Standard, both of which measure corporate carbon footprints. These standards provide guidelines that can be applied to different organizational sectors. However, these are not sufficient for controlling the reduction of carbon emissions, because although they propose the use of indicators, they do not explicitly define them. In addition, in the case of emissions from wastewater treatment, they only suggest that the emissions associated with this process be considered. In the present study, an eight‐step, unified methodology based on these two international standards is proposed, focusing on direct emissions. Moreover, the step‐by‐step to data collection, calculations, and the required indicators to control the emissions are defined. The first scope considers direct emissions from sources that are owned or controlled by the company. Methane generation measurement from wastewater treatment has been included in the methodology within Scope 1, as it is the second most polluting gas after carbon dioxide, both of which give rise to global warming. The proposed methodology was tested as a case study in one of the most important companies in the food sector in Colombia.