Environmental management system vs green specifications: How do they complement each other in the construction industry?

Environmental Management System (EMS) has been one of the important tools for sustainable construction for around two decades. However, many issues concerning sustainable development have not been properly addressed, and there is a need for the introduction of green specifications to advance green performance in construction through contract management. This paper defines green specifications, identifies the reasons for adopting green specifications and highlights the environmental issues that may not be addressed by solely adopting EMS. It also presents the results of a recent survey of practitioners concerning their opinions towards green specifications and possible impacts arising from their adoption. From the results of the survey, a framework for developing green specifications is deemed valuable for the cities striving for sustainability. Interestingly, the level of acceptable changes brought about by green specifications as perceived by different industry stakeholders is found to be unrelated to whether they were from organizations implementing EMS or not.     

Assessment of ambient ozone effects on vegetation using snap bean as a bioindicator species

Tropospheric ozone is an air pollutant that is toxic to plants, causing visible injury to foliage and a reduction in growth and yield. The use of plant bioindicators is one approach to assess the ozone impacts in diverse geographical areas. The objective of this study was to evaluate snap bean (Phaseolus vulgaris L.) as a potential bioindicator species. Three snap bean genotypes known to exhibit a range of ozone sensitivity were grown in pots under charcoal-filtered (CF) or nonfiltered (NF) treatments in open-top chambers, or under ambient air (AA) conditions. Treatment effects on biomass were not significant at 56 days after planting (DAP), but midseason foliar injury increased in the NF and AA treatments relative to CF controls. An increase in ozone from 25 to 30 nL L(-1) in CF controls to approximately 50 nL L(-1) in the NF and AA treatments was found to suppress final pod dry weight per plant by 40 to 60% in the most sensitive genotype S156. The same treatments suppressed final pod dry weight by 20 to 30% in a moderately sensitive genotype Oregon-91, and by 10% or less in a tolerant genotype R123. An S156 to R123 yield ratio of approximately one was observed under CF conditions. The S156 to R123 yield ratio declined to 0.6 to 0.7 in the NF treatment and declined further to 0.4 to 0.5 in the AA treatment, suggesting that ozone impact was underestimated in the open-top chambers. The results suggest that a snap bean bioindicator system has the potential to detect ambient ozone effects at present-day ozone concentrations.     

PARTIAL AREA HYDROLOGY AND ITS APPLICATION TO WATER RESOURCES1

ABSTRACT: According to a concept known as partial area hydrology, watershed areas are separated into hydrologically active and passive subareas. The literature relating to the development of the partial area concept is reviewed briefly and the relationship of partial area hydrology to geology, soils, and micrometeorology is illustrated. The potential application of partial area hydrology is discussed with respect to present hydrologic techniques, future hydrologic models, urban hydrology, water quality, and water management. Suggestions for identifying and delineating the contributing areas are discussed.     

Characterization of urea SCR using Taguchi technique and computational methods

Use of biodiesel in diesel engine helps to reduce HC, CO, and smoke emissions due to their enormous oxygen content, whereas NOx emissions formed by Zeldovich mechanism shoot up. Implementation of Bharat Stage (BS) VI by April 2020 in India has created extreme pressure on automobile manufacturers to include after treatment technology in their systems. Selective catalytic reduction (SCR), a NOx control technology, is operated using aqueous urea solution as the reductant. There are several parameters that need to be monitored to enhance the NOx conversion efficiency of SCR retrofit. The uniformity index of ammonia, which determines the conversion efficiency, is greatly influenced by parameters like exhaust gas temperature, injection angle, injector position, mass flow rate, and SCR geometry. This paper considers two types of SCR design, namely SCR with and without mixer design and their impact on NOx reduction. The effect of mass flow rate on urea conversion in SCR design without mixer is 27%, but the impact is reduced greatly in SCR design with mixer with less than 2% variation. The UI resulting from different cases ranges from 0.59 to 0.83. Using Taguchi technique and CFD tool, the impact of parameters on both the SCR designs has been investigated and the optimum SCR design is reported.

     

Why emotional intelligence is an invalid concept

In this paper I argue that the concept of emotional intelligence (EI) is invalid both because it is not a form of intelligence and because it is defined so broadly and inclusively that it has no intelligible meaning. I distinguish the so‐called concept of EI from actual intelligence and from rationality. I identify the actual relation between reason and emotion. I reveal the fundamental inadequacy of the concept of EI when applied to leadership. Finally, I suggest some alternatives to the EI concept. Copyright © 2005 John Wiley & Sons, Ltd.     

The environmental audit. II. Application to stream network design

The planning and execution of water quality management programs requires careful collection and analysis of data coupled with a systematic review and analysis of programmatic success. The environmental audit is a tool which facilitates improved water quality planning and management. This article demonstrates the utility of the environmental audit by reviewing portions of a comprehensive review of the water quality management program for the state of Idaho. The audit is a tool which forces careful design of a sampling program before data are collected. In the audit approach, program objectives are clearly stated prior to initiation of sampling. Stated objectives are also evaluated regularly to identify tension points, that is, conflicts between expectations and reality. In the example taken from Idaho, a management review team followed a directive to redesign the water quality monitoring program. We present a summary of the redesign as proposed by that team, to illustrate the results of a typical review of monitoring programs. That summary is followed by an example of how the proposed program would differ if the audit approach had been used. The two approaches offered both coincident and conflicting recommendations. Management review team and audit recommendations for lake sampling programs were similar even though a different process was used to develop the recommendations. The most striking contrast between the two results lies in the review team's approach to the problem. The directives followed, and the team's responses, concentrate on tools, such as increasing biological monitoring or reliance on monthly BWMP stations. In contrast, the audit results stress addressing management questions for which clear objectives have been stated, depending on specific tools only as needed to meet stated objectives. Although the audit does integrate externalities in its structure, it is little affected by economic or political influences. A major strength of the audit approach is its ability to provide defensible data for management decision making.     

Cognitive and motivational effects of participation: A mediator study

Previous experimental studies of participation have typically examined its motivational (especially commitment) benefits. These studies showed that these benefits are neither large nor consistent. The present study focused on the cognitive benefits of participation in decision making (pdm) and on the role of a different motivational mediator, self-efficacy. Unlike previous research which claimed to study the cognitive (informational) effects of participation, the present experiment: (a) allowed the information concerning task strategies to emerge from group discussion rather than being manipulated by the experimenter; (b) measured the actual strategies that were developed and used by subjects in the pdm condition; and (c) measured self-efficacy which was associated with the discovery and use of these strategies. It was found that the strategies developed by the subjects and their self-efficacy completely mediated the effect of participation on performance. Further, participation in setting goals, consistent with previous studies, did not affect performance but did affect self-efficacy.     

Optimizing carbon sequestration in commercial forests by integrating carbon management objectives in wood supply modeling

This paper provides a methodology for generating forest management plans, which explicitly maximize carbon (C) sequestration at the forest-landscape level. This paper takes advantage of concepts first presented in a paper by Meng et al. (2003; Mitigation Adaptation Strategies Global Change 8:371–403) by integrating C-sequestration objective functions in existing wood supply models. Carbon-stock calculations performed in Woodstock^TM (RemSoft Inc.) are based on C yields generated from volume table data obtained from local Forest Development Survey plots and a series of wood volume-to-C content conversion factors specified in von Mirbach (2000). The approach is used to investigate the impact of three demonstration forest-management scenarios on the C budget in a 110,000 ha forest in south-central New Brunswick, Canada. Explicit demonstration scenarios addressed include (1) maximizing timber extraction either by clearcut or selection harvesting for greatest revenue generation, (2) maximizing total C storage in the forest landscape and in wood products generated from harvesting, and (3) maximizing C storage together with revenue generation. The level of clearcut harvesting was greatest for scenario 1 (≥15 × 10⁴ m³ of wood and ≥943 ha of land per harvesting period), and least for scenario 2 (=0 m³ per harvesting period) where selection harvesting dominated. Because softwood saw logs were worth more than pulpwood ($60 m⁻³ vs. $40 m⁻³) and were strategic to the long-term storage of C, the production of softwood saw logs exceeded the production of pulpwood in all scenarios. Selection harvesting was generally the preferred harvesting method across scenarios. Only in scenario 1 did levels of clearcut harvesting occasionally exceed those of selection harvesting, mainly in the removal of old, dilapidated stands early in the simulation (i.e., during periods 1 through 3). Scenario 2 provided the greatest total C-storage increase over 80 years (i.e., 14 × 10⁶ Mg C, or roughly 264 Mg ha⁻¹) at a cost of $111 per Mg C due to lost revenues. Scenarios 3 and 1 produced reduced storage rates of roughly 9 × 10⁶ Mg C and 3 × 10⁶ Mg C, respectively; about 64% and 22% of the total, 80-year C storage calculated in scenario 2. The bulk of the C in scenario 2 was stored in the forest, amounting to about 76% of the total C sequestered.     

Sequestration of priority pollutant PAHs from sediment pore water employing semipermeable membrane devices

Semipermeable membrane devices (SPMDs) were employed to sample sediment pore water in static exposure studies under controlled laboratory conditions using (control pond and formulated) sediments fortified with 15 priority pollutant polycyclic aromatic hydrocarbons (PPPAHs). The sediment fortification level of 750 ng/g was selected on the basis of what might be detected in a sediment sample from a contaminated area. The sampling interval consisted of 0, 4, 7, 14, and 28 days for each study. The analytical methodologies, as well as the extraction and sample cleanup procedures used in the isolation, characterization, and quantitation of 15 PPPAHs at different fortification levels in SPMDs, water, and sediment were reported previously (Williamson, M.S. Thesis, University of Missouri-Columbia, USA; Williamson et al., Chemosphere (This issue--PII: S0045-6535(02)00394-6)) and used for this project. Average (mean) extraction recoveries for each PPPAH congener in each matrix are reported and discussed. No procedural blank extracts (controls) were found to contain any PPPAH residues above the method quantitation limit, therefore, no matrix interferences were detected. The focus of this publication is to demonstrate the ability to sequester environmental contaminants, specifically PPPAHs, from sediment pore water using SPMDs and two different types of fortified sediment.