On the feasibility of producing polymer–metal composites via novel variant of friction stir processing

In this study a novel variant of friction stir processing was developed for producing of polymer metal surface or bulk composites in order to enhance the mechanical, electrical and thermal properties. For this purpose, a novel tooling system was designed consists of a rotating pin, a stationary shoulder and a heating system located inside the shoulder. In present paper, for preliminary study high-density polyethylene and copper powder was selected as polymeric matrix and metallic additive, respectively. Surface quality, microstructure, ultimate tensile strength and the modulus of elasticity were determined for each prepared sample. From experimental tests, it was found that this approach is an efficient method for producing of polymer–metal composites.     

Simultaneous mobilization of heavy metals and polychlorinated biphenyl (PCB) compounds from soil with cyclodextrin and EDTA in admixture

This study evaluated the efficacy of a washing process with cyclodextrin in combination with ethylenediaminetetraacetate (EDTA) for the simultaneous mobilization of heavy metals and PCBs from a field contaminated soil. Ultrasonically aided mixing of the field contaminated soil with a combination of cyclodextrin solution (10%, w/v) and a sparing quantity (2 mmol) of EDTA, simultaneously mobilized appreciable quantities of PCBs and much of the analyte metal (Cd, Cr, Cu, Mn, Ni, Pb, Zn) burdens. Relative to the action of individual reagents, a combination of randomly methylated (RAMEB) or hydroxypropyl beta-cyclodextrin (HPCD) with EDTA did not alter the PCB extraction efficiency nor did the presence of cyclodextrin change the efficiency of mobilization of most heavy metals (Al, Cd, Cr, Fe, Mn, Ni, and Zn) but did increase the recovery of Cu and Pb modestly. Three sonication-washes with the same charge of reagents mobilized appreciable quantities of PCBs (40-76%) and quantitatively extracted the labile fraction of Cd, Cu, Mn, and Pb. RAMEB proved to be more efficient than HPCD for PCB extractions. Three successive extractions with a single charge of cyclodextrin mobilized almost as much PCB (RAMEB, 76%; HPCD, 40%) as did the companion extractions that used fresh reagents each time (RAMEB, 78%; HPCD, 42%). Collectively, these studies demonstrated that PCB compounds and selected heavy metals can be co-extracted efficiently from soil with three successive washes with the same washing suspension containing EDTA and cyclodextrin.     

Investigation on the role of traffic volume in accidents on urban highways

Introduction

Roadway safety is a major concern for the general public and public agencies, as roadway crashes claim many lives and cause substantial economic loss each year. In Iran, a large number of vehicles are involved in road accidents each year, which cause many deaths and extensive property damage; such accidents are among the major causes of death and disability in the country. Method: To reduce roadway accidents, the factors that affect the occurrence and severity of accidents should be scrutinized to prevent or reduce their effect. The method that many researchers have adopted to determine the effective parameters surrounding road accidents in recent years is through statistical modeling of accidents. In this article, the role of different kinds of vehicles in traffic flow are investigated separately in terms of the likelihood of crashes on urban highways, and the vehicles are divided into three groups: passenger cars, heavy vehicles, and light non-passenger car vehicles. Poisson and negative binomial (NB) regression models were applied to model the accidents in this research, which were categorized into two groups: no injury (property damage only) accidents and more severe (injury and fatal) accidents. Results: Ultimately, we conclude that light non-passenger car vehicles (i.e., taxis and motorcycles) play the largest role in the occurrence of crashes on urban highways for both types of accidents.     

DBP formation from degradation of DEET and ibuprofen by UV/chlorine process and subsequent post-chlorination

The formation of disinfection by-products(DBPs) from the degradation of N,N-diethyl-3-methyl benzoyl amide(DEET) and ibuprofen(IBP) by the ultraviolet irradiation(UV)/chlorine process and subsequent post-chlorination was investigated and compared with the UV/H_2O_2 process.The pseudo first-order rate constants of the degradation of DEET and IBP by the UV/chlorine process were 2 and 3.1 times higher than those by the UV/H_2O_2 process, respectively, under the tested conditions. This was due to the significant contributions of both reactive chlorine species U(RCS) and hydroxyl radicals(HO) in the UV/chlorine process. Trichloromethane, 1,1,1-trichloro-2-propanone and dichloroacetic acid were the major known DBPs formed after 90% of both DEET and IBP that were degraded by the UV/chlorine process. Their yields increased by over 50%after subsequent 1-day post-chlorination. The detected DBPs after the degradation of DEET and IBP comprised 13.5% and 19.8% of total organic chlorine(TOCl), respectively, and the proportions increased to 19.8% and 33.9% after subsequent chlorination, respectively. In comparison to the UV/H_2O_2 process accompanied with post-chlorination, the formation of DBPs and TOCl in the UV/chlorine process together with post-chlorination was 5%–63% higher,Ulikely due to the generation of more DBP precursors from the attack of RCS, in addition to HO.     

An overview on the enhanced gas condensate recovery with novel and green methods

Environmental Science and Pollution Research - A consideration of the negative environmental aspects of fossil fuels has made natural gas the best choice to meet the human demand for energy. The...     

Chemistry,abundance, detection and treatment of per- and polyfluoroalkyl substances in water: a review

Per- and polyfluoroalkyl substances (PFAS) encompass a wide range of compounds containing carbon–fluorine bonds. Due the strength of this bond and the high electronegativity of fluorine atoms, PFAS display stability, wettability and other characteristics that are unique for industrial applications and products. However, PFAS induce adverse effects on the environment and human health. Here we review the chemistry, synthesis, properties, analysis, occurrence in water, filtration, removal and oxydation of PFAS.  We highlight emerging hybrid treatments to remove PFAS from water.

     

Porous materials for the recovery of rare earth elements,platinum group metals,and other valuable metals: a review

Environmental Chemistry Letters - The demand for valuable metals such as rare earth elements and platinum group metals is rising fast in the context of the depletion of natural resources...     

Comparison of API650-2008 provisions with FEM analyses for seismic assessment of existing steel oil storage tanks

API650-2008 is one of the prominent codes consisting of seismic specifications to design steel storage tanks for earthquakes resistance. In spite of the code's broad application, there are some failure modes such as slide bottom, elephant-foot buckling, sloshing and uplift needing more evaluation. In this paper, 161 existing tanks in an oil refinery complex have been classified into 24 groups and investigated using both API650-2008 rules and numerical FEM models. Failure modes and dynamic characteristics of studied models have been calculated by numerical FEM analysis and compared with code requirements. The results demonstrate that, in some cases, there are some imperfections in the code requirements that require further investigation.     

Russia-EU gas game analysis: evidence from a new proposed trade model

Environmental Science and Pollution Research - This paper represents a new proposed trade model of “Intercountries Trade Force (ITF)” which is inspired by Intermolecular Interaction...     

A washing procedure to mobilize mixed contaminants from soil: I. Polychlorinated biphenyl compounds

We conducted a laboratory study to assess the feasibility of a washing process with nonionic and anionic surfactants in combination with ethylenediaminetetraacetate (EDTA) for the simultaneous mobilization of heavy metals and polychlorinated biphenyls (PCBs) from a field-contaminated soil. Unit processes consisting of complexometric extraction and surfactant-assisted mobilization were combined with reagent regeneration and detoxification steps to generate innocuous products. Ten minutes of ultrasonic mixing of the soil with a combination of 30 mL L(-1) surfactant suspension and a sparing quantity (2 mmol) of EDTA mobilized appreciable quantities of PCBs, virtually all of the available Cd, Cu, Mn, and Pb, and lesser amounts of the Zn, Ni, and Cr but only small quantities of Al and Fe. Relative to individual reagents, combinations of surfactant (Brij 98, Triton X-301, or Triton XQS-20) with EDTA did not influence PCB extraction efficiencies perceptibly. Of the three surfactants, the Brij 98 proved to be the most efficient for three successive extractions with a single charge, mobilizing 83% of the PCBs, whereas companion extractions that used fresh reagent each time mobilized 87% of the soil PCB content. The decreased PCB mobilization with the same quantity of anionic surfactant (71 or 68%) resulted from losses during the EDTA regeneration process with zero-valent Mg. In toto, these studies demonstrate that PCB compounds and selected heavy metals can be coextracted efficiently from soil with three successive washes with the same washing suspension containing EDTA and a nonionic surfactant.