Satellite change detection analysis of deforestation rates and patterns along the Colombia-Ecuador border

This study uses Landsat satellite data to document the rates and patterns of land-cover change along a portion of the Colombia-Ecuador border during a 23-yr period (1973-1996). Human colonization has resulted in extensive deforestation in both countries. Satellite change detection analysis showed that the annual rates of deforestation were considerably higher for the Colombian side of the border. In addition, loss of forest cover on the Colombian side for the study period was almost 43%, while only 22% on the Ecuadorian side. The study found that there is no single factor driving deforestation on either side of the border, but concluded that the higher rates on the Colombian side may be due to higher colonization pressures and intensification of illegal coca cultivation. On the Ecuador side of the border the satellite images documented patterns of deforestation that reflected road networks associated with oil exploration and development.     

Heavy metals monitoring at a Mediterranean natural ecosystem of Central Italy. Trends in different environmental matrixes

The study deals with the evaluation of the impact of heavy metal pollution on a Mediterranean natural ecosystem, and presents the results derived from a monitoring of heavy metals in different environmental matrixes (atmospheric dry depositions, suspended particulate matter (SPM) and stemflow of forest trees). Two sites in Castelporziano Presidential Estate (Rome), one internal and one near the sea-side, were chosen in order to assess the differences in pollutant load. Results showed that heavy metal contamination can arise from local anthropogenic activities, in particular road traffic, and long-range pollution, from industrial and artisan activities near Rome.     

On the sensitivity of a marine dispersion model to parameters describing the transfers of radionuclides between the liquid and solid phases

The sensitivity of a marine dispersion model for non-conservative radionuclides, previously developed and validated for the English Channel, to parameters describing the exchanges between the liquid and solid phases (suspended matter and bottom sediments) has been studied using a Monte Carlo method. A probability distribution is assigned to each parameter. They are sampled to obtain a set of model parameters and a model run is carried out. This process is repeated to obtain a distribution of model outputs. Partial correlation coefficients are calculated to assess the relative influence of each parameter on model output. Errors are also assigned to model results. Three situations are studied: an instantaneous release of radionuclides, a continuous release and the case of a contaminated sediment behaving as a long-term source of radionuclides. Calculations have also been carried out for two radionuclides with different geochemical behaviour: (137)Cs and (239,240)Pu. The results indicate that all parameters are relevant, depending on the phase we are interested in obtaining the result and on the source term (instantaneous, continuous or due to sediments). However, parameters that are, in general, more influential are kinetic rates, mixing depth in the sediment and mean radius of suspended and sediment particles. This suggests that including several particle sizes in future radionuclide dispersion models could lead to an improvement in model results. Differences have also been found with respect to the relevance of some parameters depending on the geochemical behaviour of the radionuclide.     

Polychlorobiphenyls and other organochlorine compounds in human follicular fluid

Based on observations in animals, there is an increasing evidence that a number of persistent organochlorine pollutants can alter the endocrine homeostasis, this resulting in toxic effects in particular in the developing organism. However, the role of these chemicals in determining endocrine-related diseases in humans, and possibly a decrease of fertility, is still controversial. Exposure data concerning the human reproductive system are essential for risk assessment. Based on this, the occurrence in follicular fluid of polychlorobiphenyls (PCBs), 2,3,7,8-chlorosubstituted polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs), 1,1,1-trichloro-2,2-bis(4-chlorophenyl)-ethane (p,p'-DDT) and its metabolites, and hexachlorobenzene (HCB) was investigated. With respect to PCBs, the sum of the three most abundant congeners (PCBs 138, 153 and 180) was 1230 ng/g, lipid basis (0.37 ng/g, wet weight). Congener distribution profile overlapped what is usually observed in other human tissues, as blood and milk. PCDDs, PCDFs, p,p'-DDT and 1,1-dichloro-2,2-bis(4-chlorophenyl)-ethane (p,p'-DDD) were below their determination limits. 1,1-dichloro-2,2-bis(4-chlorophenyl)-ethene (p,p'-DDE) and HCB were detected in concentrations respectively in the order of 700 and 70 ng/g, lipid basis (approximately 0.2 and approximately 0.02 ng/g, wet weight).     

Environmental assessment of biodegradable multilayer film derived from carbohydrate polymers

Multilayer films exhibit excellent properties for food packaging. However, existing products are not biodegradable. Conventional plastics, manufactured from fossil fuels, not only consume non-renewable and finite resources, but also impact heavily on waste disposal. For this reason, a new multilayer film has been developed in the Multibio Project for the production of food packaging. In this paper, the environmental impacts of the new biodegradable multilayer film—based on modified starch and polylactic acid (PLA)—and those of the conventional multilayer film—based on PP and PA6—are quantified in the categories of climate change, fossil fuel depletion, acidification and eutrophication. Conventional multilayer film has a 90% higher impact than the Multibio multilayer film. The main difference between the LCA presented and the cited literature is the inventory data obtained in the phase of polymer processing to obtain multilayer film, and the assessment of the disposal phase of the multilayer film wastes.     

Invasion of Gleditsia triacanthos in Lithraea ternifolia Montane Forests of Central Argentina

Gleditsia triacanthos and the native dominant Lithraea ternifolia in montane forests of central Argentina, considering life history and demographic traits of both the alien and the native species and different site conditions for population growth (good and bad sites). Matrix models are applied to project the consequences of differences in vital rates for population growth. Analyzing these models helps identify which life cycle transitions contributed most to population growth. Obtained population growth rates are considered to assess predicted rates of spread using the reaction-diffusion (R-D) model. G. triacanthos presents many of the life history traits that confer plants high potential for invasiveness: fast growth, clonal and sexual reproduction, short juvenile period, high seed production, and high seed germinability. These traits would ensure G. triacanthos invasive success and the displacement of the slow-growing, relatively less fecund native L. ternifolia. However, since disturbance and environmental heterogeneity complicate the invasibility pattern of G. triacanthos in these montane forests, the outcome of the invasion process is not straightforward as could be if only life history traits were considered. Great variation in demographic parameters was observed between populations of each species at good and bad sites. Though both good and bad sites signified increasing or at least stable populations for G. triacanthos, for L. ternifolia bad sites represented local extinction. Analyzing the results of matrices models helps design the optimal management for the conservation of L. ternifolia populations while preventing the invasion by G. triacanthos. The predicted asymptotic rate of spread for G. triacanthos at the good site was fourfold greater than the predicted one for L. ternifolia, although the difference was much smaller considering the bad site. The usefulness of the R-D model to study this invasion system is discussed.     

Sediment accumulation rate and radiological characterisation of the sediment of Palmones River estuary (southern of Spain)

Chemical analyses and radioecological methods were combined in order to estimate the sediment accumulation rate in the upper 20 cm depth of the Palmones River estuary. Organic matter, total carbon, C:N and (137)Cs vertical profiles showed changes at 13 cm depth. These changes could be associated with the decrease in river input since 1987 when a dam situated in the upper part of the estuary started to store water. Using 1987 as reference to date the sediment, accumulation rate was 1.2 cm yr(-1). As alternative method, two layer model of (210)Pb(xs) vertical distribution showed a sedimentation rate of 0.7 cm yr(-1) with a surface mixing layer of 7 cm thickness. The high ammonium, potassium and sodium content in pore water and the strong correlation between (137)Cs activities and organic matter in dry sediment suggests that (137)Cs (the only anthropogenic product detected) is mainly accumulated in the estuary associated with the particulate organic material from the catchment area.     

Role of aluminous component of fly ash on the durability of Portland cement-fly ash pastes in marine environment

The durability, of mixtures of two kinds of Spanish fly ashes from coal combustion (ASTM class F) with 0, 15 and 35% replacement of Portland cement by fly ash, in a simulated marine environment (Na(2)SO(4)+NaCl solution of equivalent concentration to that of sea water: 0.03 and 0.45 M for sulphate and chloride, respectively), has been studied for a period of 90 days. The resistance of the different mixtures to the attack was evaluated by means of the Koch-Steinegger test. The results showed that all the mixtures were resistant, in spite of the great amount of Al(2)O(3) content of the fly ash. The diffusion of SO(4)(2-), Na+ and Cl- ions through the pore solution activated the pozzolanic reactivity of the fly ashes causing the corresponding microstructure changes, which were characterized by X-ray diffraction (XRD), mercury intrusion porosimetry (MIP) and scanning electron microscopy (SEM). As a result, the flexural strength of the mixtures increased, principally for the fly ash of a lower particle size and 35% of addition.     

Ability of biosolids and a cationic surfactant to modify methidathion leaching. Modelling with pescol

Packed columns were prepared with an agricultural soil to examine the ability of two organic soil modifiers, biosolid and the cationic surfactant tetradecyl trimethyl ammonium bromide (TDTMA), to alter the leaching of the insecticide methidathion. Ion chloride was used as a tracer of water flow and the mathematical model PESCOL was selected to predict the mobility of the insecticide. The biosolid addition (SB column) delayed the breakthrough curves for methidathion with respect to the non-amended soil (S) column. The cationic surfactant TDTMA, alone or combined with the biosolid (SS and SBS) and previously incorporated in the soil column, caused the highest retardation of this pesticide in the soil columns. Theoretical retardation factors (TRf) were similar to the experimental Rf values for the S and SB columns, and predicted the high retention observed in the SBS and SS columns. The simulation with PESCOL predicted the experimental results.