Chloromuconolactone dehalogenase ClcF of actinobacteria

This work investigated the distribution of the clcF gene in actinobacteria isolated from different ecotopes. The gene encodes chloromuconolactone dehalogenase (CMLD) ClcF, the enzyme found to date in only one representative of Gram‐positive bacteria, Rhodococcus opacus 1CP, adapted to 2‐chlorophenol (2CP). Using primers specific to the clcF gene, from the DNA matrix of rhodococcal strains closely related to species Rhodococcus wratislaviensis (P1, P12, P13, P20, G10, KT112, KT723, BO1) we obtained PCR products whose nucleotide sequences were 100% identical to that of the clcF gene from strain R. opacus 1CP. CMLDs isolated from the biomass of strains Rhodococcus spp. G10 and P1 grown on 2CP did not differ by their subunit molecular mass deduced from the known amino acid sequence of the clcF gene from the ClcF of strain R. opacus 1CP. Matrix‐assisted laser dissociation/ionization time‐of‐flight mass spectrometry showed the presence of a peak with m/z 11,194–11,196 Da both in whole cells and in protein solutions with a ClcF activity. Thus, we have first time shown the distribution of ClcF among actinobacteria isolated from geographically distant habitats.     

环境措施对拉丁美洲咖啡生产成本的影响

咖啡种植、加工和流通既有积极的环境影响也有消极的环境影响.寿命周期分析是可以用来找到缓解这些消极影响的途径的手段之一.一个简单模式的系统化应当有社会经济性质的附加分析加以补充.当提请人们注意与咖啡生产链有关的问题时,即使旨在找到和提出与当地需要相适应的替代办法,也不应当忘记咖啡业给咖啡种植地区以及加工(洗涤、选择、炒制、研磨和掺合)地区带来很多效益.     

Influence of temperature on the chemical removal of 3-methylbutanal,trans-2-methyl-2-butenal,and 3-methyl-2-butenal by OH radicals in the troposphere

Absolute rate coefficients for the gas-phase reactions of OH radical with 3-methylbutanal (k₁), trans-2-methyl-2-butenal (k₂), and 3-methyl-2-butenal (k₃) have been obtained with the pulsed laser photolysis/laser-induced fluorescence technique. Gas-phase concentration of aldehydes was measured by UV absorption spectroscopy at 185 nm. Experiments were performed over the temperature range of 263–353 K at total pressures of helium between 46.2 and 100 Torr. No pressure dependence of all k_i (i = 1–3) was observed at all temperatures. In contrast, a negative temperature dependence of k_i (i.e., k_i increases when temperature decreases) was observed in that T range. The resulting Arrhenius expressions (±2σ) are: k₁(T) = (5.8 ± 1.7)×10^?12 exp{(499 ± 94)/T} cm³ molecule^?1 s^?1, k₂(T)=(6.9 ± 0.9)×10^?12 exp{(526 ± 42)/T} cm³ molecule^?1 s^?1, k₃(T)=(5.6 ± 1.2)×10^?12 exp{(666 ± 54)/T} cm³ molecule^?1 s^?1.The tropospheric lifetimes derived from the above OH-reactivity trend are estimated to be higher for 3-methylbutanal than those for the unsaturated aldehydes. A comparison of the tropospheric removal of these aldehydes by OH radicals with other homogeneous degradation routes leads to the conclusion that this reaction can be the main homogeneous removal pathway. However, photolysis of these aldehydes in the actinic region (λ > 290 nm) could play an important role along the troposphere, particularly for 3-methyl-2-butenal. This process could compete with the OH reaction for 3-methylbutanal or be negligible for trans-2-methyl-2-butenal in the troposphere.     

Detecting improvement in ambient air toxics: An application to ambient benzene measurements in Houston,Texas

Traditional regulatory methods for evaluating air toxics have several limitations. Two common methods rely either on self-reported industrial emissions from the Toxics Release Inventory or a single summary statistic such as the average or arithmetic mean. A novel statistical approach for detecting overall long term improvement in ambient air quality is demonstrated using measurements of the air toxic benzene evaluated over five years in Houston, Texas. Through trends of seven key statistical measures, long term improvements were detected at more monitors than would have been found using traditional methods while lack of improvement is highlighted at other monitors. This new approach includes analysis of high and low end concentrations, as well as central tendency, evaluated at specific air toxic human health risk thresholds.     

Investigation of partitioning mechanism for volatile organic compounds in a multiphase system

Laboratory experiments were performed to investigate the partitioning behavior of a set of diverse volatile organic compounds (VOCs). After equilibration at a temperature of 25 °C, the VOC concentrations were measured by headspace method in combination with gas chromatography/mass spectrometry (GC/MS). The obtained data were used to determine the partition coefficients (K_P) of VOCs in a gas-liguid-solid system. The results have shown that the presence and nature of solid materials in the working solution control the air-water partitioning of dissolved VOCs. The air/solution partitioning of BTEX and C₉-C₁₀ aldehydes was most affected in the presence of diesel soot. K_P values decreased by a factor ranging from 1.5 for toluene to 3.0 for ethylbenzene. The addition of mineral dust in the working solution exhibited greater influence on the partitioning of short aldehydes. K_P values decreased by a factor of 1.8. The experimental partition coefficients were used to develop a predictive model for partitioning of BTEX and n-aldehydes between air, water and solid phases.     

Retrieving surface deformation by PSInSAR™ technology: A powerful tool in reservoir monitoring

Reservoir monitoring improves our understanding of reservoir behaviour and helps achieve more effective reservoir management and prediction of future performance with obvious economic benefits. It relies on an integrated approach involving both surveillance (well or surface based; seismic, electrical, leakage, flow and deformation measurements, etc.) and modelling. Surface deformation monitoring can provide valuable constraints on the dynamic behaviour of a reservoir enabling the evaluation of volumetric changes in the reservoir through time. Levelling campaigns, tiltmeters, GPS permanent stations and Permanent Scatterer SAR Interferometry (PSInSAR™) are the techniques most widely used to determine surface displacements. Whatever the surveying technique, the detection of millimetre-level surface deformation is required to monitor small surface displacement rates that could impact risk evaluation and land use planning. Depending on depth and reservoir/overburden rheology, volumetric changes in reservoirs due to fluid extraction and injection can induce either subsidence or uplift that could trigger fault reactivation and threaten well integrity; deformation may also be detectable at the surface. Mapping surface effects accurately requires hundreds of observation points per km² which cannot be delivered by traditional monitoring methods without unacceptably large expenditure. PSInSAR™ is one of the most promising and cost-effective techniques capable of providing high precision and high areal density displacement measurements over long periods of time. Moreover, the availability of PS data for both ascending and descending orbits enables the estimation of both vertical and E–W horizontal displacement fields. Two case histories will be presented to illustrate the advantages of PSInSAR™ technology for the detection of surface deformation induced by reservoir exploitation and monitoring of its evolution though time.     

Ozone exposure and stomatal sluggishness in different plant physiognomic classes

Gas exchange responses to static and variable light were tested in three species: snap bean (Phaseolus vulgaris, two cultivars), California black oak (Quercus kelloggii), and blue oak (Q. douglasii). The effects of 1-month (snap beans) and 2-month (oaks) O₃ (ozone) exposure (70 ppb over 8 h per day in open-top chambers) were investigated. A delay in stomatal responses (i.e., ‘sluggish’ responses) to variable light was found to be both an effect of O₃ exposure and a reason for increased O₃ sensitivity in snap bean cultivars, as it implied higher O₃ uptake during times of disequilibrium. Sluggishness increased the time to open (thus limiting CO₂ uptake) and close stomata (thus increasing transpirational water loss) after abrupt changes in light level. Similar responses were shown by snap beans and oaks, suggesting that O₃-induced stomatal sluggishness is a common trait among different plant physiognomic classes.     

Variability of ozone concentration in a montane environment,northern Italy

To evaluate the spatial variability of ozone concentrations, two studies were undertaken in the montane environment of Trentino region, northern Italy, in 2007. In the first study, a 225 km² area was considered. Here, a randomized design was used to evaluate the variability of ozone concentration at 1 and 225 km² scale. Measurements were carried out by passive samplers between May and June 2007. In a second study, the whole 6207 km² area of Trentino was considered. The area is covered by five grid cells of the European Monitoring and Evaluation Programme (EMEP). A systematic 15 × 15 km grid was used to allocate 15 passive samplers over the entire province, resulting into 1–4 samplers for each of the 5 EMEP grid cells (2500 km² each) overlapping the study area. Measurements were carried out between June and September 2007. Accuracy of passive samplers was checked by direct comparison with conventional ozone analysers. Significant differences (P = 0.034) were found in ozone concentration among 1 × 1 km quadrates within the 225 km² study area, while variability within the 1 × 1 km grid cells (coefficient of variation, CV′ = 0.12) slightly exceed the measurement error (CV′ = 0.08). At larger scales (225, 2500 and 6207 km²), ozone concentration shows much higher variability (CV′ from 0.18 to 0.28, with peak values at 0.40). Reported differences lead to very different AOT40 estimates even within the same EMEP grid cell. These findings suggest that 1 × 1 km resolution seems appropriate for ozone concentration modelling. On the other hand, significant sub-grid variation may exist at the resolution adopted by the EMEP model. Coupled with the likely variability of other important meteorological, soil and vegetation variables, our findings suggest that ozone risk assessment for vegetation based on large-scale modelled AOT40 and flux needs to be considered with great caution. The evidence reported in this paper asks for more detailed national-scale modelling, and the development of methods to incorporate local scale variations into large-scale models.     

Fish from industrially polluted freshwater as the main source of organochlorinated pollutants and increased frequency of thyroid disorders and dysglycemia

In a certain area of Michalovce district in East Slovakia, heavy industrial pollution by polychlorinated biphenyls (PCBs) developed in 1955-1984 and very high PCB levels in environmental and human samples are still persisting. Recently, a total of 2045 adults from this and the surrounding background pollution area have been examined using questionnaire data, thyroid volume by ultrasound (ThV), urinary iodine and serum levels of 15 PCB congeners, hexachlorobenzene (HCB), 2,2'-2-bis(4-chlorobiphenyl)-1,1-dichloroethylene (DDE), 2,2'-bis(4-chlorophenyl)-1,1,1-trichloroethane (DDT), alpha-, beta- and gamma-hexachlorocyclohexane (HCH), thyrotropin (TSH), free thyroxine (FT4), anti-thyroperoxidase antibodies (TPOab) and fasting glucose. As based on our previous findings of strikingly high level of PCBs in fish from high pollution area (e.g. mean level of 375430 ng/g lipid) and considerably lower, but still relatively high level in background pollution area (e.g. mean PCB level of 5150 ng/g), the information on the frequency of fish meals and approximate annual consumption of fish from local waters was obtained by questionnaires. The association of contaminated fish consumption with very high blood levels of PCBs, DDE and HCB and increased ThV as well as with increased frequency of positive TPOab, high values of FT4 and impaired fasting glucose (IFG) was found. These associations were also confirmed in 16 marital pairs from high pollution area with very high PCB level in both members associated with high fish consumption. It was concluded that, due to persistent heavy pollution of waters, soil and food chain namely by PCBs, but also by pesticides (e.g. DDE and HCB) resulting from their previous extensive use in agriculture, the fish from local waters still remains the most important source of these toxic pollutants which results in considerable adverse health effects.