Comparison of analytical descriptions of nocturnal low-level jets within the Ekman model framework

This study focuses on the inertial oscillation aspect of the nocturnal low-level jet (NLLJ). In the context of the Ekman model solutions, conceptual NLLJ inertial oscillation analytical frameworks proposed by Blackadar in 1957 and Shapiro and Fedorovich and van de Wiel et al. in 2010 are compared. Considering a NLLJ produced via direct numerical simulation over flat terrain with no baroclinic influence as a reference case, the deficiencies of each framework in representing a realistic NLLJ are assessed. The Blackadar theory results in unrealistic wind profiles near the surface. While extensions of Blackadar’s framework by Shapiro and Fedorovich and van de Wiel et al. produce more realistic NLLJs, the simpler approach taken by van de Wiel et al. does not describe the NLLJ wind hodograph at later times sufficiently in qualitative terms.     

Analysis of short-term ozone and PM2.5 measurements: Characteristics and relationships for air sensor messaging

Air quality sensors are becoming increasingly available to the general public, providing individuals and communities with information on fine-scale, local air quality in increments as short as 1 min. Current health studies do not support linking 1-min exposures to adverse health effects; therefore, the potential health implications of such ambient exposures are unclear. The U.S. Environmental Protection Agency (EPA) establishes the National Ambient Air Quality Standards (NAAQS) and Air Quality Index (AQI) on the best science available, which typically uses longer averaging periods (e.g., 8 hr; 24 hr). Another consideration for interpreting sensor data is the variable relationship between pollutant concentrations measured by sensors, which are short-term (1 min to 1 hr), and the longer term averages used in the NAAQS and AQI. In addition, sensors often do not meet federal performance or quality assurance requirements, which introduces uncertainty in the accuracy and interpretation of these readings. This article describes a statistical analysis of data from regulatory monitors and new real-time technology from Village Green benches to inform the interpretation and communication of short-term air sensor data. We investigate the characteristics of this novel data set and the temporal relationships of short-term concentrations to 8-hr average (ozone) and 24-hr average (PM_2.5) concentrations to examine how sensor readings may relate to the NAAQS and AQI categories, and ultimately to inform breakpoints for sensor messages. We consider the empirical distributions of the maximum 8-hr averages (ozone) and 24-hr averages (PM_2.5) given the corresponding short-term concentrations, and provide a probabilistic assessment. The result is a robust, empirical comparison that includes events of interest for air quality exceedances and public health communication. Concentration breakpoints are developed for short-term sensor readings such that, to the extent possible, the related air quality messages that are conveyed to the public are consistent with messages related to the NAAQS and AQI.

Implications: Real-time sensors have the potential to provide important information about fine-scale current air quality and local air quality events. The statistical analysis of short-term regulatory and sensor data, coupled with policy considerations and known health effects experienced over longer averaging times, supports interpretation of such short-term data and efforts to communicate local air quality.     

Value chain for next-generation biofuels: resilience and sustainability of the product life cycle

Multiple factors including climate change, price uncertainties, and geopolitical instability have prompted many industries to investigate the feasibility of replacing traditional petroleum-based fuels with biofuel alternatives. However, to make this transition successful, these new biofuels must be environmentally sustainable and the necessary support infrastructure must be in place to make the production, distribution, and storage of these biofuels technologically feasible and cost effective. Developing a value chain, spanning from feedstock production to distribution to end users, requires garnering buy-in from multiple stakeholders by demonstrating environmental, economic, and social benefits and incentives. Two critical factors are the environmental benefits achieved from the use of the biofuel technology and the degree of resilience of the value chain to emergent conditions to ensure steady supply to consumers. Moreover, different biofuel pathways have different costs, benefits, and risks which must be compared. In this paper, we describe how environmental sustainability can be modeled using life cycle assessment (LCA) and how the resilience of value chain initiatives can be modeled using a scenario-based decision model. We then describe how sustainability and resilience assessments can be integrated in an iterative, anticipatory LCA framework. These assessments can be used as the basis for a business case for various investments, as well as a means for promoting responsible innovations, with the aviation industry used as a case study.     

Does Zoning Winter Recreationists Reduce Recreation Conflict?

Environmental Management - Parks and protected area managers use zoning to decrease interpersonal conflict between recreationists. Zoning, or segregation, of recreation—often by non-motorized...     

Exposure Times to the Spring Atrazine Flush Along a Stream-Reservoir System1

Stoeckel, James A., Jade Morris, Elizabeth Ames, David C. Glover, Michael J. Vanni, William Renwick, and María J. González, 2012. Exposure Times to the Spring Atrazine Flush Along a Stream-Reservoir System. Journal of the American Water Resources Association (JAWRA) 48(3): 616-634. DOI: 10.1111/j.1752-1688.2011.00633.x Abstract: We used enzyme-linked immunosorbent assay to examine reservoir-mediated shifts in spring to fall exposure of aquatic organisms to the spring atrazine pulse over four years in a Midwestern stream-reservoir system. Peak atrazine concentrations in the major inflowing stream exceeded 10 μg/l in all four years. The reservoir had a beneficial effect in two of four years by diluting atrazine below the 10 μg/l threshold. However, during the other two years, exposure times above 10 μg/l were approximately doubled in the reservoir compared to the major inflowing stream. Thresholds of 3 and 5 μg/l were exceeded during all four years in the reservoir. The uplake and downlake reservoir sites were four to five times more likely to exceed these thresholds and aquatic organisms were subjected to longer exposure times above these thresholds compared to the inflowing stream. Release of elevated atrazine concentrations from the reservoir extended exposure times in the outflowing stream. This effect was most pronounced just below the dam. Aquatic organisms upstream of the reservoir were most likely to experience acute exposures whereas organisms within and immediately downstream of the reservoir were more likely to experience chronic exposures. The ubiquity of reservoirs and the annual spring herbicide flush highlight the importance of considering the presence and relative location of reservoirs when assessing risk to aquatic communities as well as locations of drinking water intakes.     

Simultaneous immobilization of metals and arsenic in acidic polluted soils near a copper smelter in central Chile

Introduction  

Acidic and metal(oid)-rich topsoils resulted after 34 years of continuous operations of a copper smelter in the Puchuncaví valley, central Chile. Currently, large-scale remediation actions for simultaneous in situ immobilization of metals and As are needed to reduce environmental risks of polluted soils. Aided phytostabilization is a cost-effective alternative, but adequate local available soil amendments have to be identified and management options have to be defined.     

Isolation and characterization of a Rhodococcus strain with phenol-degrading ability and its potential use for tannery effluent biotreatment

Introduction

Wastewater derived from leather production may contain phenols, which are highly toxic, and their degradation could be possible through bioremediation technologies.

Materials, methods and results

In the present work, microbial degradation of phenol was studied using a tolerant bacterial strain, named CS1, isolated from tannery sediments. This strain was able to survive in the presence of phenol at concentrations of up to 1,000?mg/L. On the basis of morphological and biochemical properties, 16S rRNA gene sequencing, and phylogenetic analysis, the isolated strain was identified as Rhodococcus sp. Phenol removal was evaluated at a lab-scale in Erlenmeyer flasks and at a bioreactor scale in a stirred tank reactor. Rhodococcus sp. CS1 was able to completely remove phenol in a range of 200 to 1,000?mg/L in mineral medium at 30 ± 2?°C and pH 7 as optimal conditions. In the stirred tank bioreactor, we studied the effect of some parameters, such as agitation (200?C600 rpm) and aeration (1?C3?vvm), on growth and phenol removal efficiency. Faster phenol biodegradation was obtained in the bioreactor than in Erlenmeyer flasks, and maximum phenol removal was achieved at 400?rpm and 1 vvm in only 12?h. Furthermore, Rhodococcus sp. CS1 strain was able to grow and completely degrade phenols from tannery effluents after 9?h of incubation.

Conclusion

Based on these results, Rhodococcus sp. CS1 could be an appropriate microorganism for bioremediation of tannery effluents or other phenol-containing wastewaters.     

Phytoremediation of a Petroleum‐Hydrocarbon Contaminated Shallow Aquifer in Elizabeth City,North Carolina,USA

A former bulk fuel terminal in North Carolina is a groundwater phytoremediation demonstration site where 3,250 hybrid poplars, willows, and pine trees were planted from 2006 to 2008 over approximately 579,000 L of residual gasoline, diesel, and jet fuel. Since 2011, the groundwater altitude is lower in the area with trees than outside the planted area. Soil‐gas analyses showed a 95 percent mass loss for total petroleum hydrocarbons (TPH) and a 99 percent mass loss for benzene, toluene, ethylbenzene, and xylenes (BTEX). BTEX and methyl tert‐butyl ether concentrations have decreased in groundwater. Interpolations of free‐phase, fuel product gauging data show reduced thicknesses across the site and pooling of fuel product where poplar biomass is greatest. Isolated clusters of tree mortalities have persisted in areas with high TPH and BTEX mass. Toxicity assays showed impaired water use for willows and poplars exposed to the site's fuel product, but Populus survival was higher than the willows or pines on‐site, even in a noncontaminated control area. All four Populus clones survived well at the site. © 2014 Wiley Periodicals, Inc.*     

Strontium isotope study of coal utilization by-products interacting with environmental waters

Sequential leaching experiments on coal utilization by-products (CUB) were coupled with chemical and strontium (Sr) isotopic analyses to better understand the influence of coal type and combustion processes on CUB properties and the release of elements during interaction with environmental waters during disposal. Class C fly ash tended to release the highest quantity of minor and trace elements-including alkaline earth elements, sodium, chromium, copper, manganese, lead, titanium, and zinc-during sequential extraction, with bottom ash yielding the lowest. Strontium isotope ratios ((87)Sr/(86)Sr) in bulk-CUB samples (total dissolution of CUB) are generally higher in class F ash than in class C ash. Bulk-CUB ratios appear to be controlled by the geologic source of the mineral matter in the feed coal, and by Sr added during desulfurization treatments. Leachates of the CUB generally have Sr isotope ratios that are different than the bulk value, demonstrating that Sr was not isotopically homogenized during combustion. Variations in the Sr isotopic composition of CUB leachates were correlated with mobility of several major and trace elements; the data suggest that arsenic and lead are held in phases that contain the more radiogenic (high-(87)Sr/(86)Sr) component. A changing Sr isotope ratio of CUB-interacting waters in a disposal environment could forecast the release of certain strongly bound elements of environmental concern. This study lays the groundwork for the application of Sr isotopes as an environmental tracer for CUB-water interaction.     

Interactions between chromium and sulfur metabolism in Brassica juncea

The effects of chromate on sulfate uptake and assimilation were investigated in the accumulator Brassica juncea (L.) Czern. Seven-day-old plants were grown for 2 d under the following combination of sulfate and chromate concentration: (i) no sulfate and no chromate (-S), (ii) no sulfate and 0.2 mmol L(-1) chromate (-S +Cr), (iii) 1 mmol L(-1) sulfate and no chromate (+S), or (iv) 1 mmol L(-1) sulfate and 0.2 mmol L(-1) chromate (+S +Cr). Despite the toxic effects exerted by chromate as indicated by altered level of reducing sugars and proteins in leaves, the growth of B. juncea was only weakly reduced by chromate, and no variation in chlorophyll a and b was measured, regardless of S availability. Chromium (Cr) was stored more in roots than in leaves, and the maximum Cr accumulation was measured in -S +Cr plants. The significant decrease of the sulfate uptake rates observed in Cr-treated plants was accompanied by a repression of the root low-affinity sulfate transporter (BjST1), suggesting that the transport of chromate in B. juncea may involve sulfate carriers. Once absorbed, chromate induced genes involved in sulfate assimilation (ATP-sulfurylase: atps6; APS-reductase: apsr2; Glutathione synthethase: gsh2) and accumulation of cysteine and glutathione, which may suggest that these reduced S compounds play a role in Cr tolerance. Together, our findings indicate that when phytoremediation technologies are used to recover Cr-contaminated areas, the concentration of sulfate in the plant growth medium must be considered because it may influence the ability of plants to accumulate and tolerate Cr.