Association between Levels of Fine Particulate and Emergency Visits for Pneumonia and other Respiratory Illnesses among Children in Santiago,Chile

ABSTRACT

Recent evidence has implicated the fine fraction of particulate as the major contributor to the increase in mortality and morbidity related to particulate ambient levels. We therefore evaluated the impact of daily variation of ambient PM_2.5 and other pollutants on the number of daily respiratory-related emergency visits (REVs) to a large pediatric hospital of Santiago, Chile. The study was conducted from February 1995 to August 1996. Four monitoring stations from the network of Santiago provided air pollution data. The PM2.5 24-hr average ranged from 10 to 111 μg/m³ during September to April (warm months) and from 10 to 156 μg/m³ during May to August (cold months). Other contaminants (ozone (O₃), nitrogen dioxide (NO₂), and sulfur dioxide (SO₂)) were, in general, low during the study period. The increase in REVs was significantly related to PM₁₀ and PM_2.5 ambient levels, with the relationship between PM_2.5 levels and the number of REVs the stronger. During the cold months, an increase of 45 ìg/m³ in the PM_2.5 24-hr average was related to a 2.7% increase in the number of REVs (95% CI, 1.1–4.4%) with a two-day lag, and to an increase of 6.7% (95% CI, 1.7–12.0%) in the number of visits for pneumonia with a three-day lag. SO₂ and NO₂ were also related to REVs. We conclude that urban air pollutant mixture, particularly fine particulates, adversely affect the respiratory health of children residing in Santiago.     

The need for innovative strategies to improve immunisation services in rural Zimbabwe

Gokwe South, a rural district in Midlands Province, Zimbabwe, reported the lowest rate of immunisation coverage in the country in 2005: 55 per cent of children vaccinated with three doses of diphtheria/pertussis/tetanus vaccine (DPT3) and 35 per cent dropout between the first and third dose of DPT. In January 2007, the authors assessed local barriers to immunisation and proposed strategies to improve immunisation rates in the district, in the face of nationwide economic and political challenges. A situational analysis was performed to assess barriers to immunisation using focus-group discussions with health workers, key informant interviews with health management and community leaders, and desk reviews of records. Responses were categorised and solutions proposed. Health workers and key informants reported that immunisation service delivery was hampered by insufficient availability of gas for cold-chain equipment, limited transport and fuel to conduct basic activities, and inadequate staff and supervision. Improving coverage will require prioritising gas for vaccine cold-chain equipment, identifying reliable transportation or alternative transportation solutions, and increased staff, training and supervision. Local assessment is critical to pinpointing site-specific barriers, and innovative strategies are needed to overcome existing contextual challenges.     

Trends in primary particulate matter emissions from Canadian agriculture

Particulate matter (PM) has long been recognized as an air pollutant due to its adverse health and environmental impacts. As emission of PM from agricultural operations is an emerging air quality issue, the Agricultural Particulate Matter Emissions Indicator (APMEI) has been developed to estimate the primary PM contribution to the atmosphere from agricultural operations on Census years and to assess the impact of practices adopted to mitigate these emissions at the soil landscape polygon scale as part of the agri-environmental indicator report series produced by Agriculture and Agri-Food Canada. In the APMEI, PM emissions from animal feeding operations, wind erosion, land preparation, crop harvest, fertilizer and chemical application, grain handling, and pollen were calculated and compared for the Census years of 1981–2006. In this study, we present the results for PM₁₀ and PM_2.5, which exclude chemical application and pollen sources as they only contribute to total suspended particles. In 2006, PM emissions from agricultural operations were estimated to be 652.6 kt for PM₁₀ and 158.1 kt for PM_2.5. PM emissions from wind erosion and land preparation account for most of PM emissions from agricultural operations in Canada, contributing 82% of PM₁₀ and 76% of PM_2.5 in 2006. Results from the APMEI show a strong reduction in PM emissions from agricultural operations between 1981 and 2006, with a decrease of 40% (442.8 kt) for PM₁₀ and 47% (137.7 kt) for PM_2.5. This emission reduction is mainly attributed to the adoption of conservation tillage and no-till practices and the reduction in the area of summerfallow land.

Implications: Increasing sustainability in agriculture often means adapting management practices to have a beneficial impact on the environment while maintaining or increasing production and economic benefits. We developed an inventory of primary PM emissions from agriculture in Canada to better quantify the apportionment, spatial distribution, and trends for Census years 1981–2006. We found major reductions of 40% in PM₁₀ and 47% in PM_2.5 emissions over the 25-yr period as a co-benefit of increasing carbon sequestration in agricultural soils. Indeed, farmers adopted conservation tillage/no-till practices, increased usage of cover crops, and reduced summerfallow, in order to increase soil organic matter and reduce carbon dioxide emissions, which also reduced primary PM emissions, although the agricultural production increased over the period.     

Production and partial characterization of bioemulsifier from a chromium-resistant actinobacteria

Surface-active compounds such as synthetic emulsifiers have been used for several decades, both for the degradation of hydrocarbons and increasing desorption of soil-bound metals. However, due to their high toxicity, low degradability, and production costs unaffordable for use in larger ecosystems, synthetic emulsifiers have been gradually replaced by those derived from natural sources such as plants or microbes. In previous studies, the bacterium Streptomyces sp. MC1 has shown the ability to reduce and/or accumulate Cr(VI), a highly promising advance in the development of methods for environmental clean-up of sites contaminated with chromium. Here, new studies on the production of emulsifier from this strain are presented. The cultivation factors that have a significant influence on emulsifier biosynthesis, as well as the interactions among them, were studied by factorial design. Based upon optimization studies, maximum bioemulsifier production was detected in the culture medium having an initial pH of 8 with phosphate 2.0 g L^?1 and Ca⁺² 1.0 g L^?1 added, with an emulsification index about 3.5 times greater compared to the basal value. Interestingly, in the presence of 5.0 g L^?1 Cr(VI), Streptomyces sp. MC1 retained about 65% of its emulsifier production ability. Partially purified emulsifier presented high thermo-stability and partial water solubility. These findings could have promising future prospects for the remediation of organic- and metal-contaminated sites.     

Poly[(R)-3-hydroxy butyrate] Melt Processing: Strategy for Prevention of Degradation Reactions

Poly[(R)-3-hydroxy butyrate] (PHB) as well as all the components of the poly[(R)-3-hydroxy alkanoate]s (PHAs) family tend to degrade during processing at temperatures above their melting point via a hydrolytic mechanism induced by moisture attack and a concerted reaction mechanism induced by temperature. Therefore, the PHAs stabilization in the molten state is particularly important for production of biodegradable ecocompatible plastic items of commercial value. In order to refrain the indicated negative degradation effects, PHB was melt processed in a torque rheometer in the presence of a polymeric carbodiimide agent. Processed specimens were characterized by using FTIR, GPC, DSC, TGA and tensile properties. GPC analysis showed that the increase of the additive content in the formulation resulted in an increase of PHB molecular weight. However, decreasing in PHB thermal stability, glass transition temperature and mechanical properties, was observed with the increase of the additive amount. This behaviour most likely arises from the formation of new chemical structures promoted by the presence of the additive aimed at preventing the onset of hydrolitic processes.     

The effects of elevated carbon dioxide levels on a Vibrio sp. isolated from the deep-sea

Introduction

The effect of oceanic CO₂ sequestration was examined exposing a deep-sea bacterium identified as Vibrio alginolyticus (9NA) to elevated levels of carbon dioxide and monitoring its growth at 2,750 psi (1,846 m depth).

Findings

The wild-type strain of 9NA could not grow in acidified marine broth below a pH of 5. The pH of marine broth did not drop below this level until at least 20.8 mM of CO₂ was injected into the medium. 9NA did not grow at this CO₂ concentration or higher concentrations (31.2 and 41.6 mM) for at least 72 h. Carbon dioxide at 10.4 mM also inhibited growth, but the bacterium was able to recover and grow. Exposure to CO₂ caused the cell to undergo a morphological change and form a dimple-like structure. The membrane was also damaged but with no protein leakage.     

Metal exposures in an inner-city neonatal population

ObjectivesWe measured concentrations of lead (Pb), manganese (Mn), chromium (Cr), and copper (Cu) in umbilical cord whole blood and examined sources of environmental Pb exposures in a predominantly African-American population.MethodsBetween April and July 2006, we collected reproductive histories, questionnaires, and blood samples from 102 women, aged 16–45 years, who delivered at a Memphis, TN hospital.ResultsThe prevalence of preeclampsia and low birth weight infancy in the study population was 11% and 10%, respectively. Twenty-eight percent of mothers reported living near a potential Pb-contaminated area, while 43% lived in a residence built before 1978. Geometric mean (GM) concentrations for umbilical cord blood in the study population were 1.3, 3.5, 9.0, and 52.0 µg/dL for Pb, Mn, Cr, and Cu, respectively. Six neonates had cord blood Pb (CBL) concentrations above 10 µg/dL, while 20 had CBL concentrations ≥ 2 µg/dL. GM umbilical CBL levels were higher in neonates born to women living near a potential Pb-contaminated area (2.2 vs. 1.1 µg/dL) and those with friends, family or household members exposed to lead products (1.6 vs. 1.1 μg/dL). Some evidence of an exposure–response relationship was also detected between all four metal concentrations and an increasing number of maternal lead exposures. After adjustment for confounding, proximity to a Pb-contaminated area was the strongest environmental determinant of CBL levels among neonates with CBL concentrations of ≥ 2 µg/dL (odds ratio = 5.1; 95% CI = 1.6, 16.7).ConclusionsMetal concentrations were elevated in this population, and CBL levels were associated with proximity to Pb-contaminated areas.     

Characterization of Activated Carbon Fiber Filters for Pressure Drop,Submicrometer Particulate Collection,and Mercury Capture

ABSTRACT

The use of activated carbon fiber (ACF) filters for the capture of particulate matter and elemental Hg is demonstrated. The pressure drop and particle collection efficiency characteristics of the ACF filters were established at two different face velocities and for two different aerosols: spherical NaCl and combustion-generated silica particles. The clean ACF filter specific resistance was 153 kg m^-2 sec^-1. The experimental specific resistance for cake filtration was 1.6 × 10⁶ sec^-1 and 2.4 × 10⁵ sec^-1 for 0.5- and 1.5-μm mass median diameter particles, respectively. The resistance factor R was approximately 2, similar to that for the high-efficiency particulate air filters. There was a discrepancy in the measured particle collection efficiencies and those predicted by theory. The use of the ACF filter for elemental Hg capture was illustrated, and the breakthrough characteristic was established. The capacity of the ACF filter for Hg capture was similar to other powdered activated carbons.     

Chicken manure increased concentration of organic sulfur compounds in field-grown onions

A field study was conducted at Kentucky State University (KSU) Research Farm. The soil in five plots was mixed with sewage sludge, five plots were mixed with yard waste compost, five plots were mixed with laying hen manure each at 15 t acre^?1, and five unamended plots that never received soil amendments were used for comparison purposes. Plots were planted with onion, Allium cepa L. var. Super Star-F1. The objectives of this investigation were to: 1) determine the concentrations of two organosulfur compounds (dipropyl disulfide and dipropyl trisulfide) in onion bulbs and 2) investigate the effect of mixing soil with three amendments (sewage sludge, yard waste, and chicken manure) on the concentration of dipropyl disulfide and dipropyl trisulfide in onion bulbs. Gas chromatographic/mass spectrometric (GC/MS) analyses of onion oil in chloroform extracts revealed the presence of two major fragment ions that correspond to dipropyl disulfide and – trisulfide. Concentration of these two organic sulfur compounds was greatest (1.5 and 0.8 mg 100 g^?1 fresh weight, respectively) in onion bulbs of plants grown in chicken manure and lowest (0.4 and 0.07 mg 100 g^?1 fresh weight, respectively) in onion bulbs of plants grown in yard waste compost treatments. We concluded that chicken manure could be exploited in growing onions with health-promoting properties.     

Brominated flame retardants in the Australian population: 1993-2009

Brominated flame retardants, including hexabromocyclododecane (HBCD) and polybrominated diphenyl ethers (PBDEs) are used to reduce the flammability of a multitude of electrical and electronic products, textiles and foams. The use of selected PBDEs has ceased, however, use of decaBDE and HBCD continues. While elevated concentrations of PBDEs in humans have been observed in Australia, no data is available on other BFRs such as HBCD. This study aimed to provide background HBCD concentrations from a representative sample of the Australian population and to assess temporal trends of HBCD and compare with PBDE concentrations over a 16 year period. Samples of human milk collected in Australia from 1993 to 2009, primarily from primiparae mothers were combined into 12 pools from 1993 (2 pools); 2001; 2002/2003 (4 pools); 2003/2004; 2006; 2007/2008 (2 pools); and 2009. Concentrations of ∑HBCD ranged from not quantified (nq) to 19 ng g(-1)lipid while α-HBCD and γ-HBCD ranged from nq to 10 ng g(-1)lipid and nq to 9.2 ng g(-1)lipid. β-HBCD was detected in only one sample at 3.6 ng g(-1)lipid while ∑(4)PBDE ranged from 2.5 to 15.8 ng g(-1)lipid. No temporal trend was apparent in HBCD concentrations in human milk collected in Australia from 1993 to 2009. In comparison, PBDE concentrations in human milk show a peak around 2002/03 (mean ∑(4)PBDEs=9.6 ng g(-1)lipid) and 2003/04 (12.4 ng g(-1)lipid) followed by a decrease in 2007/08 (2.7 ng g(-1)lipid) and 2009 (2.6 ng g(-1)lipid). In human blood serum samples collected from the Australian population, PBDE concentrations did not vary greatly (p=0.441) from 2002/03 to 2008/09. Continued monitoring including both human milk and serum for HBCD and PBDEs is required to observe trends in human body burden of HBCD and PBDEs body burden following changes to usage.