Determination of organophosphorus fire retardants and plasticizers in wastewater samples using MAE-SPME with GC-ICPMS and GC-TOFMS detection

Determination of organophosphorus fire retardants and plasticizers at trace levels in wastewater is described. In this work, microwave assisted extraction (MAE) and solid-phase microextraction (SPME) are used for sample preparation to extract and preconcentrate the analytes, followed by analysis by gas chromatography coupled to inductively coupled plasma mass spectrometry (GC-ICP-MS) for phosphorus-specific detection. Gas chromatography coupled to time of flight mass spectrometry (GC-TOF-MS) was used to confirm the organphosphorus fire retardants in wastewater. The detection limits of organophosphorus fire retardants (OPFRs) were 29 ng L(-1) for tri-n-butyl phosphate (TnBP), 45 ng for L(-1) for tris(2-butoxyethyl)phosphate (TBEP), and 50 ng L(-1) for tris(2-ethylhexyl)phosphate (TEHP). Optimized extraction conditions were performed at 65 degrees C for 30 min and with 10% NaCl. Application of MAE during the sample preparation prior to the SPME allowed the detection of tris(2-ethylhexyl) phosphate, which has been difficult to determine in previous work. Application of the method to wastewater samples resulted in detecting 3.1 microg L(-1) P from TnBP, 5.0 microg L(-1) P from TBEP, and 4.0 microg L(-1) P from TEHP. The presence of these compounds were also confirmed by SPME-GC-TOF-MS.     

Sulfur Dioxide Air Pollution in New York City: Statistical Analysis of Twelve Years

During the heating season SO₂ levels at three stations in New York City exhibit irregular hourly and daily variation about a long-term repeating annual sine wave which peaks in mid-January. This sine wave varies slightly in phase from station to station, but is nearly coincident in time with long term Normal Temperature observed at Central Park. During summer, SO₂ levels at these stations remain relatively constant at their lowest values. On a daily basis, SO₂ levels tend to exhibit a characteristic bimodality during the heating season. The paper concludes with suggestions for further analysis. Mathematical convenience suggests defining “pollution winter” and ”pollution summer” in agreement with the high and low regions of the sine wave. The frequency distribution for the pollution winter lies considerably above, and that for pollution summer lies considerably below the twelve year distribution for all seasons combined     

EPA SITE Demonstration of the BioTrol Soil Washing Process

A pilot-scale soil washing process, patented by BioTrol, Inc., was demonstrated on soil contaminated by wood treating waste, primarily pentachlorophenol (PCP) and creosote-derived polynuclear aromatic hydrocarbons (PAHs). Although soil washing was the main object of this demonstration, the treatment train that was evaluated included two other BioTrol technologies for treatment of waste streams from the soil washer. The three technologies were: ? The BioTrol Soil Washer (BSW)—a volume reduction process, which uses water to separate contaminated soil fractions from the bulk of the soil.

? The BioTrol Aqueous Treatment System (BATS)—a biological water treatment process.

? The Slurry Bioreactor (SBR)—a BioTrol biological slurry treatment process conducted in an EIMCO BIOLIFT^tm reactor.

The sandy soil at the site, consisting of less than 10 percent of fines, was well suited for treatment by soil washing. The soil washer was evaluated in two tests on soil samples containing 130 ppm and 680 ppm of PCP, respectively.

The BSW successfully separated the feed soil (dry weight basis) into 83 percent of washed soil, 10 percent of woody residues, and 7 percent of fines. The washed soil retained about 10 percent of the feed soil contamination while 90 percent of the feed soil contamination was contained within the woody residues, fines, and process water.

The soil washer achieved up to 89 percent removal of PCP and 88 percent of total PAHs, based on the difference between their levels in the as-is (wet) feed soil and the washed soil. PCP concentrations of 14 ppm and 87ppm in the washed soil were achieved from PCP concentrations of 130 ppm and 680ppm in the feed soil. Concentrations of total PAHs were reduced from 247 ppm to 42 ppm and 404 ppm to 48 ppm, respectively, in the two tests.

The BATS degraded up to 94 percent of PCP in the process water from soil washing. PAH removal could not be determined due to low influent concentrations.

The SBR achieved over 90 percent removals of PCP and 70 to 90 percent removals of PAHs from the slurry of contaminated fines from soil washing. However, steady state operation was not achieved during the single test and the results were variable.

Cost of a commercial-scale soil washing, assuming use of all three technologies, was estimated to be $168 per ton of soil treated. Incineration of woody material accounts for 76 percent of the cost.     

Lessons learned from classroom training on natural attenuation of chlorinated solvents

Technology and information transfer are critical functions within the remediation industry. Researchers in the private sector, academia, and government all struggle to have their findings accepted and put to good use by the remediation industry at large but must work even harder to have their findings accepted and put into practice by state and federal regulators in the environmental agencies overseeing cleanups. Unfortunately, many technology and information transfer efforts fail to reach state and federal regulators, and even fewer achieve regulatory acceptance. A two‐year‐long campaign to deliver a training class on the natural attenuation of chlorinated solvents in groundwater is one prominent example of very effective technology and information transfer. Several of the elements and aspects of that successful training class are presented and discussed in order to provide others with a proven and workable template. © 2010 Wiley Periodicals, Inc.     

Gas phase precursors to anthropogenic secondary organic aerosol: Using the Master Chemical Mechanism to probe detailed observations of 1,3,5-trimethylbenzene photo-oxidation

A detailed gas-phase photochemical chamber box model, incorporating the Master Chemical Mechanism (MCMv3.1) degradation scheme for the model anthropogenic aromatic compound 1,3,5-trimethylbenzene, has been used to simulate data measured during a series of aerosol chamber experiments in order to evaluate the mechanism under a variety of VOC/NO_x conditions.The chamber model was used in the interpretation of comprehensive high (mass and time) resolution measurements of 1,3,5-trimethylbenzene and its photo-oxidation products recorded by a Chemical Ionisation Reaction Time-of-Flight Mass Spectrometer (CIR-TOF-MS). Supporting gas and aerosol measurements have also enabled us to explore the ‘missing link’ between the gas and aerosol phases. Model-measurement comparisons have been used to gain insight into the complex array of oxygenated products formed, including the peroxide bicyclic ring opening products (α,β-unsaturated-γ-dicarbonyls and furanones) and the O₂-bridged peroxide bicyclic ring-retaining products. To our knowledge this is the first time such high molecular weight species, corresponding to various peroxide bicyclic products represented in the MCMv3.1, have been observed in the gas-phase. The model was also used to give insight into which gas-phase species were participating in SOA formation, with the primary and secondary peroxide products, formed primarily under low NO_x conditions, identified as likely candidates.     

DDT levels in human milk in Hong Kong, 2001-02

High levels of p,p'-DDT were detected in Hong Kong breast milk sampled in 1976 and 1985. Monitoring DDT levels in human breast milk in this region is important to identify trends in exposure. As part of the 2002-03 WHO/EURO coordinated exposure study, the concentrations of DDT and its metabolites were determined in 10 pooled milk samples classified by geographic origin and dietary history, comprising milk samples from 238 primiparous mothers giving birth in Hong Kong. Analysis was performed by Gas Chromatography (GC) with electron capture detector and confirmed by GC/Mass Spectrometry. The sum-DDT concentration (range: 0.92-2.05mg/kg fat) was age-dependent and indicated a decreasing trend since the 1970s. Mothers who recently came from mainland China had higher p,p'-DDT to p,p'-DDE ratios, suggesting a more recent exposure compared to women mainly residing in Hong Kong. The average Hong Kong sum-DDT level (1.50mg/kg fat) was among the highest of the contemporary levels (range: 0.12-1.97mg/kg fat; median: 0.40mg/kg fat) in the 16 countries/regions participating in the 2002-03 WHO/EURO exposure study. This is probably due to the previous extensive DDT exposure and continuing use of DDT in agriculture in mainland China. Despite the apparent decrease of DDT body load over 30 years, the environmental health hazard from DDT contamination in the Pearl River Delta region remains a concern. Measures to eradicate illegal use of DDT in mainland China and regular food monitoring programs are needed in the region. Despite the presence of DDT and other persistent organic pollutants in human breast milk, breastfeeding should continue to be strongly supported for its life-long benefits to infants.     

Quantifying Diffuse Pollution Sources and Loads for Environmental Quality Standards in Urban Catchments

The paper explores the application of a unit area loading (UAL) approach to address the requirements of the US Clean Water Act (CWA) and the EU Water Framework Directive (WFD) for the identification and quantification of diffuse urban pollution sources. The UAL approach defines the spatial distribution of pollutant loadings within an urban catchment as a basis for the assessment of in-stream hazards and the implementation of source control BMP measures. Calculated annual outflow concentrations for a specific catchment for two pollutants, zinc and hydrocarbons, illustrate the different levels of dilution/control, which can be required to achieve receiving water quality standards and objectives. Methodological issues relating to traditional volume-concentration probabilistic modelling on which the UAL approach is based are discussed, and the application of the UAL approach to non-point diffuse pollution load management is reviewed.     

Evaluating the cost-effectiveness of a monitoring system for improved evacuation from passenger ships

This paper presents an evaluation of the cost-effectiveness of a novel passenger monitoring system based on RFID technology for implementation onboard passenger ships. Such a system will be able to detect and keep track of passengers onboard the ship in emergency situations in order to provide crucial decision support to the officer in charge of evacuation. This will lead to increased safety and security on passenger ships. However, this increased safety will come at a certain cost. A methodology in line with Formal Safety Assessment is employed in order to assess the cost-effectiveness of the system, involving a thorough risk analysis.     

Parental mosaic trisomy 21 detected following maternal cell contamination of an amniotic fluid specimen from a normal male pregnancy

We report a case of maternal mosaic trisomy 21 ascertained at prenatal diagnosis as a result of maternal cell contamination of an amniotic fluid sample. A 34 year old female was referred for karyotyping because of a previous trisomy 21 pregnancy. Chromosome analysis of primary in situ cultures showed a karyotype of 47,XX, + 21[6]/46,XY[32]/46,XX[2]. Molecular testing demonstrated maternal cell contamination of the amniotic fluid sample and G-banded karyotyping of maternal blood showed that 3/200 cells had trisomy 21, consistent with the mother being a Down syndrome mosaic. A normal male baby with a 46,XY chromosome complement was delivered at 30 weeks. This case emphasises the need for close collaboration between cytogenetic and molecular genetics laboratories in resolving unusual cases of mosaicism. Copyright © 2007 John Wiley & Sons, Ltd.