Examining the agricultural producer identity: utilising the collective occupational identity construct to create a typology and profile of rural landholders in Victoria,Australia

Multifunctional rural landscapes are often characterised by contrasting values, land uses and land management practices of rural property owners. It seems these trends are, in part, an expression of rural landholder's identification as farmers. Existing typologies of rural landholders seldom take into account occupational identity. Research discussed in this paper addresses that gap. The objective was to apply the collective occupational identity construct to address the challenges of profiling rural landholders and test its effectiveness at distinguishing between different types of landholders. A 12-item scale was used to explore the extent rural landholders in south-eastern Australia held an agricultural producer identity. Cluster analysis resulted in the creation of four clusters of rural landholders with distinctive characteristics, suggesting the approach can provide researchers with a theoretically sound construct and practitioners with a useful tool as they attempt to better understand and engage rural landholders in sustainable agriculture.     

Rangeland Fire Protection Associations as disaster response organisations

Rangeland Fire Protection Associations (RFPAs) are volunteer-based groups of trained private landowners who are authorised to respond to events in partnership with governmental agencies. This study analysed the functioning and structure of RFPAs in Idaho and Oregon in the western United States to characterise this under-researched model of disaster response. RFPAs represent an expanding type of disaster response organisation that interfaces with established fire suppression entities, yet ‘emergent behaviour’ manifested in some RFPA response actions. This appeared to lessen and mediate with time, as well as due to recognition of the issues, increased experience of fires, and training that fostered new mutual understandings. There is a need for continued examination of the effect of repeat experience in developing the characteristics of disaster response organisations. In addition, it is crucial to know how the interface between established and other types of organisations may be enhanced to make cooperative disaster response more effective.     

Concentrations of PM2.5-associated OC, EC, and PCDD/Fs measured during the 2003 wildfire season in Missoula, Montana

Throughout August and September, 2003, wildfires burned in close proximity to Missoula, Montana, with smoke emanating from the fires impacting the valley for much of the summer. This presented the perfect opportunity to measure the levels of polychlorinated dibenzodioxins and dibenzofurans (PCDD/F) comprising ambient forest fire smoke particles impacting the Missoula Valley. An air sampler at the Montana Department of Environmental Quality's (DEQ) compliance site in Missoula measured hourly averages of PM₁₀ throughout the fire season. Three collocated PM_2.5 cyclones collected 24-h smoke samples using quartz filters and Polyurethane Foam (PUF) sorbent cartridges. From the quartz filters, concentrations of Organic and Elemental Carbon (OC/EC) were measured, while PCDD/F were measured from one set of a filter (particle phase) and PUF (vapor phase) aggregate of samples in an attempt to also investigate the different phases of PCDD/F in forest fire smoke impaired communities.Hourly PM₁₀ concentrations peaked at 302.9 μg m⁻³ on August 15. The highest OC concentration (115.6 μg m⁻³) was measured between August 21–22, and the highest EC concentration of 10.5 μg m⁻³ was measured August 20–21. Measurable concentrations of PM_2.5 associated PCDD/Fs were not detected from a representative aggregate sample, with the exception of small amounts of 1,2,3,4,6,7,8-heptachlorodibenzodioxin and octachlorodibenzodioxin. PM_2.5 samples collected during the smoke events were composed of approximately 65% OC. However, the OC fraction of the particles collected in the smoke impaired Missoula valley was not composed of significant amounts of PCDD/F.     

Effects of field storage method on <Emphasis Type="Italic">E. coli</Emphasis> concentrations measured in storm water runoff

Storm water runoff is increasingly assessed for fecal indicator organisms (e.g., Escherichia coli, E. coli) and its impact on contact recreation. Concurrently, use of autosamplers along with logistic, economic, technical, and personnel barriers is challenging conventional protocols for sample holding times and storage conditions in the field. A common holding time limit for E. coli is 8 h with a 10 °C storage temperature, but several research studies support longer hold time thresholds. The use of autosamplers to collect E. coli water samples has received little field research attention; thus, this study was implemented to compare refrigerated and unrefrigerated autosamplers and evaluate potential E. coli concentration differences due to field storage temperature (storms with holding times ≤24 h) and due to field storage time and temperature (storms >24 h). Data from 85 runoff events on four diverse watersheds showed that field storage times and temperatures had minor effects on mean and median E. coli concentrations. Graphs and error values did, however, indicate a weak tendency for higher concentrations in the refrigerated samplers, but it is unknown to what extent differing die-off and/or regrowth rates, heterogeneity in concentrations within samples, and laboratory analysis uncertainty contributed to the results. The minimal differences in measured E. coli concentrations cast doubt on the need for utilizing the rigid conventional protocols for field holding time and storage temperature. This is not to say that proper quality assurance and quality control is not important but to emphasize the need to consider the balance between data quality and practical constraints related to logistics, funding, travel time, and autosampler use in storm water studies.     

Sperm precedence and sperm storage in multiply mated red flour beetles

In insects, the last male to mate with a female often gains access to a disproportionate number of subsequent fertilizations. This study examined last-male sperm precedence patterns in doubly and triply mated Tribolium castaneum females. Sperm storage processes were investigated by measuring the quantity of sperm stored within the female spermatheca following single, double, and triple matings. Both doubly mated and triply mated females exhibited high last-male sperm precedence for progeny produced during the first 48 h following the last mating, with females in both groups exhibiting parallel declines in sperm precedence 1 and 2 weeks later. The number of sperm stored by females increased by 33% between singly mated and doubly mated females, indicating that the spermatheca is filled to only two-thirds capacity following insemination by the first male. Based on the proportion of stored sperm from first and second matings, we tested predictions about sperm precedence values based on models of random sperm mixing. High initial last-male sperm precedence strongly supports stratification of last-male sperm. By 1–2 weeks after double matings, sperm precedence declined to levels indistinguishable from values expected under random mixing. These results provide insight into mechanisms of sperm storage and utilization in this species. Received: 20 August 1997 / Accepted after revision: 24 May 1998     

In Situ Remediation of 1,4‐Dioxane Using Electrical Resistance Heating

Recent regulatory changes need more challenging treatment goals for 1,4‐dioxane. However, significant treatment limitations exist in part due to the high solubility and low Henry's law constant of 1,4‐dioxane. Two case studies are reported with substantial 1,4‐dioxane concentration reductions through in situ thermal remediation via electrical resistance heating (ERH). Concentration reductions greater than 99.8 percent of 1,4‐dioxane have been observed in the field using ERH. Concentrations of 1,4‐dioxane in air and steam extracted by an ERH vapor recovery system have also been evaluated. Laboratory studies were conducted to further understand the mechanisms that enable ERH remediation of 1,4‐dioxane. Vapor liquid equilibrium studies in water and soil were conducted and utilized to develop an ERH treatment cost model for 1,4‐dioxane. Existing field data were correlated to the 1,4‐dioxane treatment cost model. Field observations and laboratory testing indicate steam stripping that occurs through ERH remediation is an effective treatment method for 1,4‐dioxane. ©2015 Wiley Periodicals, Inc.     

A Quantitative Review of Urban Ecosystem Service Assessments: Concepts,Models, and Implementation

Although a number of comprehensive reviews have examined global ecosystem services (ES), few have focused on studies that assess urban ecosystem services (UES). Given that more than half of the world’s population lives in cities, understanding the dualism of the provision of and need for UES is of critical importance. Which UES are the focus of research, and what types of urban land use are examined? Are models or decision support systems used to assess the provision of UES? Are trade-offs considered? Do studies of UES engage stakeholders? To address these questions, we analyzed 217 papers derived from an ISI Web of Knowledge search using a set of standardized criteria. The results indicate that most UES studies have been undertaken in Europe, North America, and China, at city scale. Assessment methods involve bio-physical models, Geographical Information Systems, and valuation, but few study findings have been implemented as land use policy.

Electronic supplementary material

The online version of this article (doi:10.1007/s13280-014-0504-0) contains supplementary material, which is available to authorized users.     

Temperature effects on particulate emissions from DPF-equipped diesel trucks operating on conventional and biodiesel fuels

Emissions tests were conducted on two medium heavy-duty diesel trucks equipped with a particulate filter (DPF), with one vehicle using a NOx absorber and the other a selective catalytic reduction (SCR) system for control of nitrogen oxides (NOx). Both vehicles were tested with two different fuels (ultra-low-sulfur diesel [ULSD] and biodiesel [B20]) and ambient temperatures (70ºF and 20ºF), while the truck with the NOx absorber was also operated at two loads (a heavy weight and a light weight). The test procedure included three driving cycles, a cold start with low transients (CSLT), the federal heavy-duty urban dynamometer driving schedule (UDDS), and a warm start with low transients (WSLT). Particulate matter (PM) emissions were measured second-by-second using an Aethalometer for black carbon (BC) concentrations and an engine exhaust particle sizer (EEPS) for particle count measurements between 5.6 and 560 nm. The DPF/NOx absorber vehicle experienced increased BC and particle number concentrations during cold starts under cold ambient conditions, with concentrations two to three times higher than under warm starts at higher ambient temperatures. The average particle count for the UDDS showed an opposite trend, with an approximately 27% decrease when ambient temperatures decreased from 70ºF to 20ºF. This vehicle experienced decreased emissions when going from ULSD to B20. The DPF/SCR vehicle tested had much lower emissions, with many of the BC and particle number measurements below detectable limits. However, both vehicles did experience elevated emissions caused by DPF regeneration. All regeneration events occurred during the UDDS cycle. Slight increases in emissions were measured during the WSLT cycles after the regeneration. However, the day after a regeneration occurred, both vehicles showed significant increases in particle number and BC for the CSLT drive cycle, with increases from 93 to 1380% for PM number emissions compared with tests following a day with no regeneration.

Implications:?The use of diesel particulate filters (DPFs) on trucks is becoming more common throughout the world. Understanding how DPFs affect air pollution emissions under varying operating conditions will be critical in implementing effective air quality standards. This study evaluated particulate matter (PM) and black carbon (BC) emissions with two DPF-equipped heavy-duty diesel trucks operating on conventional fuel and a biodiesel fuel blend at varying ambient temperatures, loads, and drive cycles.     

Mercury uptake and accumulation by four species of aquatic plants

The effectiveness of four aquatic plants including water hyacinth (Eichornia crassipes), water lettuce (Pistia stratiotes), zebra rush (Scirpus tabernaemontani) and taro (Colocasia esculenta) were evaluated for their capabilities in removing mercury from water. The plants were exposed to concentrations of 0 mg/L, 0.5 mg/L or 2 mg/L of mercury for 30 days. Assays were conducted using both Microtox (water) and cold vapor Atomic Absorption Spectroscopy (AAS) (roots and water). The Microtox results indicated that the mercury induced acute toxicity had been removed from the water. AAS confirmed an increase of mercury within the plant root tissue and a corresponding decrease of mercury in the water. All species of plants appeared to reduce mercury concentrations in the water via root uptake and accumulation. Water lettuce and water hyacinth appeared to be the most effective, followed by taro and zebra rush, respectively.