Decomposition of paper wastes in presence of ceramics and cement raw material

Paper recycling is an environmental important activity that is carried out in all the countries, but during the recycling process a paper waste is produced. Generally these wastes are placed in landfill sites but it is possible to profit it as secondary fuel and raw material in manufacture furnaces.

In this work the combustion of the waste papers with cement and ceramic raw material has been studied with the objective to analyse the interaction of these substances with the emitted pollutants like PAHs and PCDD/Fs.

The results of the study show that the presence of inorganic material produces an increment in the lighter PAH emission but chlorinated compounds are not affected. The PCDD/F emission level found in the combustion of this waste is quite low compared with other wastes subjected to similar conditions.     

Levels of PCDDs, PCDFs and dioxin-like PCBs in raw cow's milk collected in France in 2006

Polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) as well as polychlorinated biphenyls (PCBs) are widespread environmental contaminants. A French national survey was carried out in April 2006 to assess the concentrations of PCDD/Fs and dioxin-like PCBs (DL-PCBs) in raw cow's milk. A random sampling scheme stratified by region was applied to collect 239 raw milk samples from 93 plants belonging to 17 dairy companies. Compared to a previous survey led in 1998 analyzing half-skimmed drinking milk in France, the PCDD/Fs level was cut by half, with an average concentration of 0.33 pg toxic equivalent (TEQ)/g fat in 2006. The mean DL-PCBs concentration was 0.57 pg TEQ/g fat and subsequently the sum of PCDD/Fs and DL-PCBs was 0.90 pg/g fat, values below the thresholds defined by the European Union regulations.     

Analysis of perfluorooctanoate (PFOA) and other perfluorinated compounds (PFCs) in the River Po watershed in N-Italy

C7-C11 perfluorinated carboxylates (PFACs) and perfluorooctansulfonate (PFOS) were analysed in selected stretches of the River Po and its major tributaries. Analyses were performed by solid-phase extraction (SPE) with Oasis HLB cartridges and methanol elution followed by LC-MS-MS detection using 13C-labelled internal standards. High concentration levels ( approximately 1.3 microg l(-1)) of perfluorooctanoate (PFOA) were detected in the Tánaro River close to the city Alessandria. After this tributary, levels between 60 and 337 ng l(-1) were measured in the Po River on several occasions. The PFOA concentration close to the river mouth in Ferrara was between 60 and 174 ng l(-1). Using the river discharge flow data in m3 s(-1) at this point (average approximately 920 m3 s(-1) for the year 2006), a mass load of approximately 0.3 kg PFOA per hour or approximately 2.6 tons per year discharged in the Adriatic Sea has been calculated. PFOS concentration levels in the Po River at Ferrara were approximately 10 ng l(-1).     

Combined photo-Fenton and biological oxidation for pesticide degradation: effect of photo-treated intermediates on biodegradation kinetics

Biodegradability of a partially photo-oxidized pesticide mixture is demonstrated and the effect of photo-Fenton treatment time on growth and substrate consumption of the bacteria Pseudomonas putida CECT 324 is shown. Four commercial pesticides, laition, metasystox, sevnol and ultracid, usually employed in citric orchards in eastern Spain, were chosen for these experiments. The active ingredients are, respectively, dimethoate, oxydemeton-methyl, carbaryl and methidathion. Judging by biomass measurements, dissolved organic carbon measurements and biodegradation efficiency, it may be concluded that 90min相似文献   

Comparison of arsenic resistance in Mediterranean woody shrubs used in restoration activities

Myrtus communis, Arbutus unedo and Retama sphaerocarpa are Mediterranean shrubs widely used in revegetation of semiarid degraded soils. The aim of this work is to study the resistance of these plants to arsenic under controlled conditions, in order to evaluate their potential use in revegetation and/or phytoremediation of As-polluted soils. R. sphaerocarpa showed higher resistance to As than M. communis or A. unedo according to its higher EC50, P status and P/As molar ratio in both, roots and shoots, and the lower increases in lipid peroxidation and decrease of chlorophyll levels in response to arsenic, while the highest arsenate sensitivity was obtained for A. unedo. Arsenic was mainly retained in roots, and, although M. communis accumulated higher arsenic amounts than the other two species, R. sphaerocarpa showed the highest root to shoot transfer. Most of the studied parameters (chlorophylls, MDA and total thiols) showed significant correlation with arsenic concentration in roots and leaves of plants, so they can be useful indexes in the diagnosis of arsenic toxicity in these species. According to our results, both M. communis and R. sphaerocarpa could be used in the revegetation of moderately arsenic contaminated sites.     

Traffic and catalytic converter - related atmospheric contamination in the metropolitan region of the city of Rio de Janeiro, Brazil

In this work, 24-h PM10 samples were collected in Rio de Janeiro, Brazil, and analysed for trace elements (Cd, Ce, Cu, La, Mo, Ni, Pb, Pd, Rh, Sb and Sn). The sampling was carried out at five locations (Bonsucesso; Centro, downtown city; Copacabana; Nova Igua?u and Sumaré) with different traffic densities and anthropogenic activities. An analytical method based on the EPA method for the determination of trace elements in airborne particulate matter (PM), using ultrasonic-assisted extraction and inductively coupled plasma mass spectrometry (ICP-MS) was applied. Our results suggest that vehicular traffic is the most important source of environmental pollution at the studied sites. The presence of Mo, Pd and Rh in the analysed filters reflects an additional source of pollution caused by the erosion and deterioration of automotive catalytic converters.     

Coupled solar photo-Fenton and biological treatment for the degradation of diuron and linuron herbicides at pilot scale

A coupled solar photo-Fenton (chemical) and biological treatment has been used to remove biorecalcitrant diuron (42 mg l(-1)) and linuron (75 mg l(-1)) herbicides from water at pilot plant scale. The chemical process has been carried out in a 82 l solar pilot plant made up by four compound parabolic collector units, and it was followed by a biological treatment performed in a 40 l sequencing batch reactor. Two Fe(II) doses (2 and 5 mg l(-1)) and sequential additions of H2O2 (20 mg l(-1)) have been used to chemically degrade the initially polluted effluent. Next, biodegradability at different oxidation states has been assessed by means of BOD/COD ratio. A reagent dose of Fe=5 mg l(-1) and H2O2=100 mg l(-1) has been required to obtain a biodegradable effluent after 100 min of irradiation time. Finally, the organic content of the photo-treated solution has been completely assimilated by a biomass consortium in the sequencing batch reactor using a total suspended solids concentration of 0.2 g l(-1) and a hydraulic retention time of 24h. Comparison between the data obtained at pilot plant scale (specially the one corresponding to the chemical step) and previously published data from a similar system performing at laboratory scale, has been carried out.     

In situ assay with the midge Kiefferulus calligaster for contamination evaluation in aquatic agro-systems in central Thailand

The aims of this study were to verify the suitability of in situ tests using the tropical midge Kiefferulus calligaster and to evaluate the most sensitive endpoint for the assessment of aquatic pesticide contamination. In situ tests were carried out in freshwater drainage channels (farm channels) that supply vegetable crops and receive considerable pesticide spray drift, and at channels outside farms (main channels). Moreover a pesticide-free farm was used as reference site. The endpoints analysed were: survival of the larvae, body length increment, capsule width increment, cholinesterase activity and glutathione S-transferase activity. Seasonal change was investigated as rainy season and dry season. Deleterious effects were observed at some farms especially during the rainy season when farmers apply heavier doses of pesticides. However, high mortality rates observed in main channels suggest that these water bodies are also affected by other impacts besides pesticide use. This work shows the potential of the in situ assay with K. calligaster as a tool for the environmental quality assessment of tropical aquatic ecosystems.     

Mineralization of the biocide chloroxylenol by electrochemical advanced oxidation processes

Electrochemical advanced oxidation processes (EAOPs) are environmentally friendly methods based on the destruction of organic pollutants in wastewaters with in situ electrogenerated hydroxyl radical. This species is formed in anodic oxidation (AO) from water oxidation at the anode and in indirect electro-oxidation methods like electro-Fenton (EF) and photoelectro-Fenton (PEF) also from reaction between catalytic Fe2+ and H2O2 continuously produced at the O2-diffusion cathode. The PEF method involves the irradiation of the treated solution with UVA light to enhance the photolysis of organics including Fe(III) complexes. In this work, the oxidation power of such EAOPs to decontaminate synthetic wastewaters of the biocide chloroxylenol (4-chloro-3,5-dimethylphenol) at pH 3.0 is comparatively examined with an undivided electrolytic cell containing a Pt or boron-doped diamond (BDD) anode and a stainless steel or O2-diffusion cathode. The initial chlorine is released as Cl(-) ion, which remains stable in the medium using Pt or is oxidized to Cl2 on BDD. The biocide solutions can be completely decontaminated using AO with a BDD anode, as well as PEF with a Pt or BDD anode. The PEF procedure with a BDD anode is the most powerful method leading to total mineralization in about 300 min, practically independent of current density. When current density rises, the degradation rate of processes increases, but they become less efficient due to the larger enhancement of waste reactions of oxidants. Chloroxylenol is much more rapidly removed in EF and PEF than in AO. 2,6-dimethylhydroquinone, 2,6-dimethyl-p-benzoquinone and 3,5-dimethyl-2-hydroxy-p-benzoquinone are identified as aromatic by-products, and maleic, malonic, pyruvic, acetic and oxalic acids are found as generated carboxylic acids. A general pathway for chloroxylenol mineralization by all EAOPs including the above by-products is proposed.     

Fe(III) promoted LAS (linear alkylbenzenesulfonate) removal from waters

The mechanisms of the interactions between Fe(III) aquacomplexes and surfactants were investigated; three alkylbenzenzsulfonates, two surfactants (octylbenzenesulfonate (OBS) and dodecylbenzenesulfonate (DBS)), and a shorter derivative (ethylbenzenesulfonate (EBS)) were studied. The results with OBS show evidence for three different ways in which Fe(III) interferes with the surfactant: the widely described flocculation process, complexation of Fe(OH)2+ (aquacomplexes) by the surfactant, and a redox reaction. The formation of a weak complex is maximum for a ratio of three between the monomeric aquacomplex [FeOH(H2O)5]2+ and OBS. In the presence of oxygen, an intramolecular redox reaction occurs inside the complex. The interaction between commercial DBS and Fe(III) was also investigated. Immediate precipitation occurred, mainly involving derivatives of higher molecular weights that are contained in the DBS samples. The constituents with the shortest alkyl chain were not affected by the presence of Fe(III) as it was also observed with EBS.