The Use of Health Risk Assessment to Estimate Desirable Sampling Detection Limits

Abstract

The inclusion of non-detected chemicals in a health risk assessment may lead, in some cases, to estimated risks that exceed regulatory thresholds, because one must use the detection limit or half of the detection limit. This study presents a methodology which will allow one to estimate appropriate detection limits by conducting a health risk assessment prior to the source sampling program. The advantages and shortcomings of various levels of detail in the risk assessment to determine those detection limits are discussed. The application of the methodology is demonstrated with a case study of the potential health effects of power plant stack emissions.     

A different approach for predicting reaeration rates in gravity sewers and completely mixed tanks.

A new semiempirical approach is presented for predicting air-to-water oxygen transfer rates in mixed tanks and gravity sewers, using methods adopted from mixing theory. First, a flocculation unit was used to impart selected mean velocity gradients (G) into a completely mixed tank, from which oxygen was first removed, and dissolved oxygen concentrations were measured with time. Regression analysis was used to fit the rate of oxygen transfer equation against G. The reaeration rate in completely mixed reactors was found to be proportional to G2 (R2 = 0.987). Subsequently, G was linked to headloss in sewers, and the equation was calibrated using a slope-adjustable, 27-m-long, gravity-flow, experimental sewer (internal diameter, D = 0.16 m). Here, the reaeration rate was proportional to G1 (R2 = 0.981). The equation was compared with existing oxygen transfer models and validated against experimental data from the literature, to which the overall mass transfer coefficient for oxygen, K(L)a, derived by the new approach, conformed well.     

The dispersion of the Buncefield oil fire plume: An extreme accident without air quality consequences

The dispersion of pollutants from the huge Buncefield oil depot fire that occurred on 11 December 2005 is simulated using a regional Eulerian chemistry-transport model. We analyse the transport and mixing of the fire plume. We show that the hot plume never reached the ground. Instead, it pierced the thin wintertime boundary layer and was injected into the free troposphere at higher altitudes. This is in agreement with data from many air quality stations. This high injection was fortunate because the fine aerosol particles (PM₁₀) mass column generated by the fire smoke exceeded that of ordinary pollution by an order of magnitude. Our regional chemistry-transport modelling is able to predict the early development of the plume dispersion, as shown by a qualitative comparison between simulated PM₁₀ columns and a satellite image obtained by the EOS-TERRA-MODIS sensor.If the accident had occurred in summer when boundary layers are much deeper and convective, a severe degradation in air quality due to PM₁₀ could have occurred, as shown by a sensitivity simulation assuming a similar fire during one of the hottest days of August 2003. The modelled impact of the fire on regional and European air quality levels strongly depends on the altitude reached by the buoyant plume, as shown by a set of sensitivity simulations with variable injection heights. However, in all cases we found that the fire only affected surface aerosol concentrations without increasing photochemical pollution.     

Spatial attributes and reserve design models: A review

A variety of decision models have been formulated for the optimal selection of nature reserve sites to represent a diversity of species or other conservation features. Unfortunately, many of these models tend to select scattered sites and do not take into account important spatial attributes such as reserve shape and connectivity. These attributes are likely to affect not only the persistence of species but also the general ecological functioning of reserves and the ability to effectively manage them. In response, researchers have begun formulating reserve design models that improve spatial coherence by controlling spatial attributes. We review the spatial attributes that are thought to be important in reserve design and also review reserve design models that incorporate one or more of these attributes. Spatial modeling issues, computational issues, and the trade-offs among competing optimization objectives are discussed. Directions for future research are identified. Ultimately, an argument is made for the development of models that capture the dynamic interdependencies among sites and species populations and thus incorporate the reasons why spatial attributes are important.     

Field evaluation of two diffusive samplers and two adsorbent media to determine 1,3-butadiene and benzene levels in air

Two types of diffusive samplers, both of which are compatible with thermal desorption, but differ in their geometry—SKC-Ultra (badge-type) and Radiello (radial symmetry-type)—were evaluated indoors and outdoors under varying temperature, humidity and wind speed conditions, using the graphitized adsorbents Carbopack X or Carbograph 5 to measure 1,3-butadiene and benzene in ambient air. The results obtained by diffusive sampling were compared with results obtained using a conventional active sampling method over both long (1 week) and shorter periods (6–24 h). Analysis and detection were performed using an automatic thermal desorber (ATD) connected to a gas chromatograph-flame ionization detector (GC/FID). Results from each sampler and adsorbent combination were examined using ordinary or multiple linear regression analysis. The overall uncertainty (OU) was also determined. In general, the results obtained with both samplers showed good agreement with those obtained by active sampling. Carbopack X appeared to be a more efficient adsorbent than Carbograph 5 for 1,3-butadiene, but the two adsorbents were equivalent for benzene. No effects of either humidity or air velocity were observed. Minor temperature effects were observed for both samplers for 1,3-butadiene. In summary, the results confirmed the accuracy of sampling rates previously determined for the two samplers and adsorbents. We consider the two samplers to be suitable for stationary and personal monitoring for the general population of 1,3-butadiene and benzene in various environments, indoors and outdoors. They are almost independent of meteorological conditions and may be suitable for monitoring industrial atmospheres.     

Sampling of polychlorinated aromatics in workroom air using Amberlite XAD-2 resin

Amberlite XAD-2 porous polymer was evaluated for the solid sampling of PCBs, PCNs, tri-, tetra-and pentachlorophenol in workroom air. Using solvent desorption, the recoveries of these compounds from XAD-2 was mostly about 80%, showing this adsorbent to be an excellent medium for the sampling of polychlorinated aromatics in air.     

Invasive cordgrass modifies wetland trophic function

Vascular plants strongly control belowground environments in most ecosystems. Invasion by vascular plants in coastal wetlands, and by cordgrasses (Spartina spp.) in particular, are increasing in incidence globally, with dramatic ecosystem-level consequences. We examined the trophic consequences of invasion by a Spartina hybrid (S. alterniflora x S. foliosa) in San Francisco Bay (USA) by documenting differences in biomass and trophic structure of benthic communities between sediments invaded by Spartina and uninvaded sediments. We found the invaded system shifted from an algae-based to a detritus-based food web. We then tested for a relationship between diet and tolerance to invasion, hypothesizing that species that consume Spartina detritus are more likely to inhabit invaded sediments than those that consume surface algae. Infaunal diets were initially examined with natural abundance stable isotope analyses and application of mixing models, but these yielded an ambiguous picture of food sources. Therefore, we conducted isotopic enrichment experiments by providing 15N-labeled Spartina detritus both on and below the sediment surface in areas that either contained Spartina or were unvegetated. Capitellid and nereid polychaetes, and oligochaetes, groups shown to persist following Spartina invasion of San Francisco Bay tidal flats, took up 15N from labeled native and invasive Spartina detritus. In contrast, we found that amphipods, bivalves, and other taxa less tolerant to invasion consumed primarily surficial algae, based on 13C enrichment experiments. Habitat (Spartina vs. unvegetated patches) and location of detritus (on or within sediments) did not affect 15N uptake from detritus. Our investigations support a "trophic shift" model for ecosystem response to wetland plant invasion and preview loss of key trophic support for fishes and migratory birds by shifting dominance to species not widely consumed by species at higher trophic levels.     

Building resilience and adaptation to manage Arctic change

Unprecedented global changes caused by human actions challenge society's ability to sustain the desirable features of our planet. This requires proactive management of change to foster both resilience (sustaining those attributes that are important to society in the face of change) and adaptation (developing new socioecological configurations that function effectively under new conditions). The Arctic may be one of the last remaining opportunities to plan for change in a spatially extensive region where many of the ancestral ecological and social processes and feedbacks are still intact. If the feasibility of this strategy can be demonstrated in the Arctic, our improved understanding of the dynamics of change can be applied to regions with greater human modification. Conditions may now be ideal to implement policies to manage Arctic change because recent studies provide the essential scientific understanding, appropriate international institutions are in place, and Arctic nations have the wealth to institute necessary changes, if they choose to do so.     

Diurnal rhythm of the bioluminescent field in the ocean epipelagic zone

Characteristics of the diurnal rhythm of the bioluminescence field are analyzed on the basis of experimental data obtained in the region around Kamchatka peninsula (50°31′N; 163°50′E). The feasibility of reconstructing the nocturnal structure of the bioluminescence field by measurements made at other times of the day has been demonstrated. Diurnal rhythm parameters for the bioluminescent field of several other studied areas of the ocean have been defined. The temporal parameters feature linear latitudinal dependence. At the equator the boundaries of morning and evening transition periods are 05:06 to 07:30 and 17:48 to 19:54 hrs, respectively. In the Barents Sea in spring these boundaries are 02:42 to 04:06 and 19:48 to 21:12 hrs. Boundary times of diurnal rhythm do not deviate from the linear regression by more than 10%. Received: 21 August 1998 / Accepted 4 March 1999