Ectomised conductors in the golden orb-web spider, Nephila plumipes (Araneoidea): a male adaptation to sexual conflict?

Male genitalia may facilitate sperm protection by acting as a plug that prevents or hinders future matings. The pedipalps (intromittant organs) of males of the orb-web spider, Nephila plumipes, have a conductor with a peculiarly curved ending and a triangular process near the terminal end. The tip of the conductor, including the process, breaks during most matings and remains inside the female genital tract. We explored the possible function of the conductor as a mating plug using the double-mating sterile-male technique. Our data are not consistent with a plug function because males use only one pedipalp in each mating, thus leaving an unobstructed insemination duct available for future matings; conductors of males mating with virgin females are not more likely to break than those of males mating with mated females, and second males show no preference for used or unused spermathecae. In addition, males that inserted their palp in the insemination duct that contained a tip of the conductor from a previous male obtained a share in the paternity of the female's clutch of eggs. Interestingly, the conductor is more likely to break if it is inserted in an unused spermatheca. We argue that several lines of evidence suggest that the conductor breaks as a result of intersexual conflict over the duration of copulation.     

Acoustic concomitants of the defensive discharges of a primitive bombardier beetle (Metrius contractus)

Summary. Metrius contractus, a primitive paussoid bombardier beetle, emits its defensive quinonoid froth with accompanying sound (a faint “hiss”), but the sound is not pulsed, indicating that the secretory emission itself is not pulsed. Pulsed secretory delivery in bombardier beetles appears to occur in Brachinini only. Received 8 July 2001; accepted 23 July 2001.     

Polycyclic aromatic hydrocarbon contamination in stormwater detention pond sediments in coastal South Carolina

The purpose of this study was to characterize the polycyclic aromatic hydrocarbon (PAH) contamination in the sediments of stormwater detention ponds in coastal South Carolina. Levels of the sum of PAH analytes were significantly higher in the sediments of commercial ponds compared to that of reference, golf course, low-density residential, and high-density residential ponds. Isomer ratio analysis suggested that the predominant source of PAHs were pyrogenic; however, many ponds had a PAH signature consistent with mixed uncombusted and combusted PAH sources. PAH levels in these sediments could be modeled using both pond drainage area and pond surface area. These results demonstrate that the sediment from most commercial ponds, and a few residential and golf course ponds, were moderately contaminated with PAHs. PAH levels in these contaminated ponds exceeded between 42% and 75% of the ecological screening values for individual PAH analytes established by US EPA Region IV, suggesting that they may pose a toxicological risk to wildlife.     

Upstream to downstream: stormwater quality in Mayagüez, Puerto Rico

The focus of this research was upon consequences of urban stormwater runoff entering two streams in Mayagüez, Puerto Rico. Mayagüez is the largest urban area of the western side of the island of Puerto Rico and provides an excellent point of reference to monitor the affects of urban development on water quality in a tropical climate. The two monitored streams were Quebrada del Oro and Cano Majagual. The research hypothesis asks, "Does stormwater runoff from urban development measurably affect the water quality of downstream receiving water by raising the conductivity, temperature, and flow quantity characteristics during storm events in comparison to upstream water quality?" In essence, the results for Quebrada del Oro agreed with the hypothesis of this project, while Cano Majagual produced results different from the hypothesis primarily due to the absence of non-urbanized land use for both upstream and downstream sections as well as the buffering capacity of a large wetland just upstream of the downstream instrument location of Cano Majagual. Both streams showed signs of stream impairment according to the temperature criteria (32°C or 90°F) set by the Junta de Calidad Ambiental and the US Environmental Protection Agency. Dissolved oxygen levels of the streams were severely affected by water temperature and oxygen-consuming matter within these stream systems, making dissolved oxygen and temperature important water quality parameters for tropical climates.     

Preparation, certification and interlaboratory analysis of workplace air filters spiked with high-fired beryllium oxide

Occupational sampling and analysis for multiple elements is generally approached using various approved methods from authoritative government sources such as the National Institute for Occupational Safety and Health (NIOSH), the Occupational Safety and Health Administration (OSHA) and the Environmental Protection Agency (EPA), as well as consensus standards bodies such as ASTM International. The constituents of a sample can exist as unidentified compounds requiring sample preparation to be chosen appropriately, as in the case of beryllium in the form of beryllium oxide (BeO). An interlaboratory study was performed to collect analytical data from volunteer laboratories to examine the effectiveness of methods currently in use for preparation and analysis of samples containing calcined BeO powder. NIST SRM(?) 1877 high-fired BeO powder (1100 to 1200 °C calcining temperature; count median primary particle diameter 0.12 μm) was used to spike air filter media as a representative form of beryllium particulate matter present in workplace sampling that is known to be resistant to dissolution. The BeO powder standard reference material was gravimetrically prepared in a suspension and deposited onto 37 mm mixed cellulose ester air filters at five different levels between 0.5 μg and 25 μg of Be (as BeO). Sample sets consisting of five BeO-spiked filters (in duplicate) and two blank filters, for a total of twelve unique air filter samples per set, were submitted as blind samples to each of 27 participating laboratories. Participants were instructed to follow their current process for sample preparation and utilize their normal analytical methods for processing samples containing substances of this nature. Laboratories using more than one sample preparation and analysis method were provided with more than one sample set. Results from 34 data sets ultimately received from the 27 volunteer laboratories were subjected to applicable statistical analyses. The observed performance data show that sample preparations using nitric acid alone, or combinations of nitric and hydrochloric acids, are not effective for complete extraction of Be from the SRM 1877 refractory BeO particulate matter spiked on air filters; but that effective recovery can be achieved by using sample preparation procedures utilizing either sulfuric or hydrofluoric acid, or by using methodologies involving ammonium bifluoride with heating. Laboratories responsible for quantitative determination of Be in workplace samples that may contain high-fired BeO should use quality assurance schemes that include BeO-spiked sampling media, rather than solely media spiked with soluble Be compounds, and should ensure that methods capable of quantitative digestion of Be from the actual material present are used.     

Gene-TEQ--a standardized comparative assessment of effects in the comet assay using genotoxicity equivalents

Existing methods for the comparison of genotoxic effects in the comet assay bear considerable disadvantages such as the problem to link information about concentration dependence and severity of effects. Moreover, given the lack of standardized protocols and the use of various standards, it may be extremely difficult to compare different studies. In order to provide a method for standardized comparative assessment of genotoxic effects, the concept of genotoxicity equivalents (Gene-TEQ) was developed. As potential reference compounds for genotoxic effects, three directly acting (N-methyl-N'-nitro-N-nitrosoguanidine (MNNG), methyl-methanesulfonate, and N-methyl-N-nitrosourea) and three indirectly acting (cyclophosphamide, dimethylnitrosamine, and 4-nitroquinoline-oxide) genotoxic substances were compared with respect to their cytotoxic (neutral red) and genotoxic (comet assay) concentration-response profiles in the permanent fish cell line RTL-W1. For further comparison, two sediment extracts from the upper Danube River were investigated as environmental samples. Based on the results of cytotoxicity and genotoxicity testing, MNNG was selected as the reference compound. At several exposure levels and durations, genotoxic effects of both the other pure substances and the environmental samples were calculated as percentages of the maximum MNNG effect and related to the absolute MNNG effect (EC values). Thus, genotoxicity equivalent factors (Gene-TEQs) relative to MNNG could be calculated. Gene-TEQs can easily be applied to pure substances, mixtures and field samples to provide information about their toxicity relative to the reference compound. Furthermore, the Gene-TEQ concept allows a direct comparison of environmental samples from different laboratories.     

Systematic evaluation of dissolved lead sorption losses to particulate syringe filter materials

Distinguishing between soluble and particulate lead in drinking water is useful in understanding the mechanism of lead release and identifying remedial action. Typically, particulate lead is defined as the amount of lead removed by a 0.45-μm filter. Unfortunately, there is little guidance regarding selection of filter membrane material and little consideration to the possibility of the sorption of dissolved lead to the filter. The objective of this work was to examine the tendency of 0.45-μm syringe filter materials to adsorb lead. Tests were performed with water containing 40 and 24 μg/L soluble lead at pH 7 buffered with 50 mg C/L dissolved inorganic concentration (DIC). The amounts of lead sorbed greatly varied by filter, and only two filter types, polypropylene and mixed cellulose esters, performed well and are recommended. Great care must be taken in choosing a filter when filtering soluble lead and interpreting filter results.     

Persistence and effect of processing on reduction of chlorantraniliprole residues on brinjal and okra fruits

Dissipation and decontamination of chlorantraniliprole (Coragen 18.5 SC) in brinjal and okra fruits were studied following field application at single and double doses of 30 and 60 g ai ha^?1, and the residues of the insecticide was estimated using LC-MS/MS. Initial residues of chlorantraniliprole at single and double doses on the fruits of brinjal were 0.72 and 1.48 mg kg^?1, while on okra fruits, the residues were 0.48 and 0.91 mg kg^?1, respectively. The residues reached below detectable level of 0.01 mg kg^?1 on the 10th day. Half-life of chlorantraniliprole at 30 and 60 g ai ha^?1 on brinjal was 1.58 and 1.80 days with the calculated waiting period of 0.69 and 2.38 days, whereas on okra, the values were 1.60 and 1.70 and 0 and 1.20 days, respectively. The extent of removal of chlorantraniliprole using simple decontaminating techniques at 2 h and 3 days after spraying was 40.99–91.37 % and 29.85–89.12 %, respectively, from brinjal fruits and 47.78–86.10 % and 41.77–86.48 %, respectively, from okra fruits.     

An evaluation of selenium concentrations in water, sediment, invertebrates, and fish from the Solomon River Basin

The Solomon River Basin is located in north-central Kansas in an area underlain by marine geologic shales. Selenium is an indigenous constituent of these shales and is readily leached into the surrounding groundwater. Portions of the Basin are irrigated primarily through the pumping of selenium-contaminated groundwater from wells onto fields in agricultural production. Water, sediment, macroinvertebrates, and fish were collected from various sites in the Basin in 1998 and analyzed for selenium. Selenium concentrations were analyzed spatially and temporally and compared to reported selenium toxic effect thresholds for specific ecosystem components: water, sediments, food-chain organisms, and wholebody fish. A selenium aquatic hazard assessment for the Basin was determined based on protocol established by Lemly. Throughout the Basin, water, macroinvertebrate, and whole fish samples exceeded levels suspected of causing reproductive impairment in fish. Population structures of several fish species implied that successful reproduction was occurring; however, the influence of immigration of fish from low-selenium habitats could not be discounted. Site-specific fish reproduction studies are needed to determine the true impact of selenium on fishery resources in the Basin. The U.S. Government’s right to retain a non-exclusive, royalty free license in and to any copyright is acknowledged.