A review of emerging technologies for remediation of PFASs

The need for remediation of poly‐ and perfluoroalkyl substances (PFASs) is growing as a result of more regulatory attention to this new class of contaminants with diminishing water quality standards being promulgated, commonly in the parts per trillion range. PFASs comprise >3,000 individual compounds, but the focus of analyses and regulations has generally been PFASs termed perfluoroalkyl acids (PFAAs), which are all extremely persistent, can be highly mobile, and are increasingly being reported to bioaccumulate, with understanding of their toxicology evolving. However, there are thousands of polyfluorinated “PFAA precursors”, which can transform in the environment and in higher organisms to create PFAAs as persistent daughter products. Some PFASs can travel miles from their point of release, as they are mobile and persistent, potentially creating large plumes. The use of a conceptual site model (CSM) to define risks posed by specific PFASs to potential receptors is considered essential. Granular activated carbon (GAC) is commonly used as part of interim remedial measures to treat PFASs present in water. Many alternative treatment technologies are being adapted for PFASs or ingenious solutions developed. The diversity of PFASs commonly associated with use of multiple PFASs in commercial products is not commonly assessed. Remedial technologies, which are adsorptive or destructive, are considered for both soils and waters with challenges to their commercial application outlined. Biological approaches to treat PFASs report biotransformation which creates persistent PFAAs, no PFASs can biodegrade. Water treatment technologies applied ex situ could be used in a treatment train approach, for example, to concentrate PFASs and then destroy them on‐site. Dynamic groundwater recirculation can greatly enhance contaminant mass removal via groundwater pumping. This review of technologies for remediation of PFASs describes that:

• GAC may be effective for removal of long‐chain PFAAs, but does not perform well on short‐chain PFAAs and its use for removal of precursors is reported to be less effective;
• Anion‐exchange resins can remove a wider array of long‐ and short‐chain PFAAs, but struggle to treat the shortest chain PFAAs and removal of most PFAA precursors has not been evaluated;
• Ozofractionation has been applied for PFASs at full scale and shown to be effective for removal of total PFASs;
• Chemical oxidation has been demonstrated to be potentially applicable for some PFAAs, but when applied in situ there is concern over the formation of shorter chain PFAAs and ongoing rebound from sorbed precursors;
• Electrochemical oxidation is evolving as a destructive technology for many PFASs, but can create undesirable by‐products such as perchlorate and bromate;
• Sonolysis has been demonstrated as a potential destructive technology in the laboratory but there are significant challenges when considering scale up;
• Soils stabilization approaches are evolving and have been used at full scale but performance need to be assessed using appropriate testing regimes;
• Thermal technologies to treat PFAS‐impacted soils show promise but elevated temperatures (potentially >500 °C) may be required for treatment.

There are a plethora of technologies evolving to manage PFASs but development is in its early stage, so there are opportunities for much ingenuity.     

Options for National Parks and Reserves for Adapting to Climate Change

Past and present climate has shaped the valued ecosystems currently protected in parks and reserves, but future climate change will redefine these conditions. Continued conservation as climate changes will require thinking differently about resource management than we have in the past; we present some logical steps and tools for doing so. Three critical tenets underpin future management plans and activities: (1) climate patterns of the past will not be the climate patterns of the future; (2) climate defines the environment and influences future trajectories of the distributions of species and their habitats; (3) specific management actions may help increase the resilience of some natural resources, but fundamental changes in species and their environment may be inevitable. Science-based management will be necessary because past experience may not serve as a guide for novel future conditions. Identifying resources and processes at risk, defining thresholds and reference conditions, and establishing monitoring and assessment programs are among the types of scientific practices needed to support a broadened portfolio of management activities. In addition to the control and hedging management strategies commonly in use today, we recommend adaptive management wherever possible. Adaptive management increases our ability to address the multiple scales at which species and processes function, and increases the speed of knowledge transfer among scientists and managers. Scenario planning provides a broad forward-thinking framework from which the most appropriate management tools can be chosen. The scope of climate change effects will require a shared vision among regional partners. Preparing for and adapting to climate change is as much a cultural and intellectual challenge as an ecological challenge.     

Influence of academic education on the perception of wood in watercourses

Human perception of in-channel wood can influence decision-making about wood reintroduction in watercourses for restoration purposes. A questionnaire survey was conducted among first-year and advanced Polish students and professionals involved in the management and protection of watercourses in Poland. The purpose was to assess their perception of river scenes with and without wood in terms of naturalness, aesthetics, danger and need for improvement. Generally, students perceived riverscapes with wood to be less aesthetic, more dangerous and needing more improvement than riverscapes without wood. However, many aspects of the riverscape perception are subject to changes as the student progresses in studying. The culturally conditioned, negative perception of in-channel wood is reduced during the education of geography and biology students but enhanced in the course of water engineering studies. The improved perception of watercourses containing wood was most pronounced for the advanced geography students from a university in which some tutors conducted research on in-channel wood and could have transferred knowledge about and positive attitudes toward wood to their students. A comparison of the riverscape evaluation by biology students and national park managers indicates that education in the discipline facilitates understanding of the environmental significance of in-channel wood although its effects are highly insufficient to form the positive attitude toward wood-containing watercourses typical of the managers. In turn, the education of water engineering students about in-channel wood apparently dominantly emphasizes threats caused by its presence in watercourses, so that the students' highly negative attitude toward wood needs to be significantly moderated when the graduates begin working as water authority managers.     

Investigation into the use of satellite data in aiding characterization of particulate air quality in the Atlanta, Georgia metropolitan area

Poor air quality episodes occur often in metropolitan Atlanta, GA. The primary focus of this research is to assess the capability of satellites as a tool in characterizing air quality in Atlanta. Results indicate that intracity PM2.5 (particulate matter < or = 2.5 microm in aerodynamic diameter) concentrations show similar patterns as other U.S. urban areas, with the highest concentrations occurring within the city. PM2.5 and MODIS (Moderate Resolution Imaging Spectroradiometer) aerosol optical depth (AOD) have higher values in the summer than spring, yet MODIS AOD doubles in the summer unlike PM2.5. Most (80%) of the Ozone Monitoring Instrument aerosol index (AI) is below 0.5 with little differences between spring and summer. Using this value as a constraint of the carbonaceous aerosol signal in the urban area, aerosol transport events such as wildfire smoke associated with higher positive AI values can be identified. The results indicate that MODIS AOD is well correlated with PM2.5 on a yearly and seasonal basis with correlation coefficients as high as 0.8 for Terra and 0.7 for Aqua. A possible alternative view of the PM2.5 and AOD relationship is seen through the use of AOD thresholds. These probabilistic thresholds provide a means to describe the air quality index (AQI) through the use of multiyear AOD records for a specific area. The National Ambient Air Quality Standards (NAAQS) are used to classify the AOD into different AQI codes and probabilistically determine thresholds of AOD that represent most of a specific AQI category. For example, 80% of cases of moderate AQI days have AOD values between 0.5 and 0.6. The development of AOD thresholds provides a useful tool for evaluating air quality from the use of satellites in regions where there are sparse ground-based measurements of PM2.5.     

Efficacy of insurance for organisational disaster recovery: case study of the 2010 and 2011 Canterbury earthquakes

Insurance is widely acknowledged to be an important component of an organisation's disaster preparedness and resilience. Yet, little analysis exists of how well current commercial insurance policies and practices support organisational recovery in the wake of a major disaster. This exploratory qualitative research, supported by some quantitative survey data, evaluated the efficacy of commercial insurance following the sequence of earthquakes in Canterbury, New Zealand, in 2010 and 2011. The study found that, generally, the commercial insurance sector performed adequately, given the complexity of the events. However, there are a number of ways in which insurers could improve their operations to increase the efficacy of commercial insurance cover and to assist organisational recovery following a disaster. The most notable of these are: (i) better wording of policies; (ii) the availability of sector‐specific policies; (iii) the enhancement of claims assessment systems; and (iv) risk‐based policy pricing to incentivise risk reduction measures.     

Solidarity Between Human and Non-Human Animals: Representing Animal Voices in Policy Deliberations

In this paper, we discuss the bridging potential of “interspecies” solidarity between the often incommensurable ethics of care and justice. Indeed, we show that the Environmental Communication literature emphasizes feelings of care and compassion as vectors of responsibility taking for animals. But we also show that a growing field of Political Animal Rights suggest that such responsibility taking should instead be grounded in universalizable terms of justice. Our argument is that a dual conception of solidarity can bridge this divide: On the one hand, solidarity as a pre-political relation with animals and, on the other hand, as a political practice based on open public deliberation of universalizable claims to justice; that is, claims to justice advanced by human proxy representatives of vulnerable non-humans. Such a dual conception can both challenge and validate NGOs’ claims to “speak on behalf of animals” in policy following the Aarhus Convention, indeed underwriting the Convention by insights from internatural communication in solidarity as relation, and by subjecting it to rational scrutiny in mini-publics in solidary as practice.     

Chemical and Biological Characterization of Products of Incomplete Combustion from the Simulated Field Burning of Agricultural Plastic

Chemical and biological analyses were performed to characterize products of Incomplete combustion emitted during the simulated open field burning of agricultural plastic. A small utility shed equipped with an air delivery system was used to simulate pile burning and forced-air-curtain incineration of a nonhalogenated agricultural plastic that reportedly consisted of polyethylene and carbon black. Emissions were analyzed for combustion gases; volatile, semi-volatile, and particulate organics; and toxic and mutagenlc properties. Emission samples, as well as samples of the used (possibly pesticide-contaminated) plastic, were analyzed for the presence of several pesticides to which the plastic may have been exposed. Although a variety of alkanes, alkenes, and aromatic and polycyclic aromatic hydrocarbon (PAH) compounds were identified in the volatile, seml-volatlle, and particulate fractions of these emissions, a substantial fraction of higher molecular weight organic material was not identified. No pesticides were Identified in either combustion emission samples or dlchloromethane washes of the used plastic. When mutagenlcity was evaluated by exposing Salmonella bacteria (Ames assay) to whole vapor and vapor/partlculate emissions, no toxic or mutagenlc effects were observed. However, organic extracts of the particulate samples were moderately mutagenlc. This mutagenlcity compares approximately to that measured from residential wood heating on a revertant per unit heat release basis. Compared to pile burning, forced air slightly decreased the time necessary to burn a charge of plastic. There was not a substantial difference, however, in the variety or concentrations of organic compounds Identified In samples from these two burn conditions. This study highlights the benefits of a combined chemical/biological approach to the characterization of complex, multi-component combustion emissions. These results may not reflect those of other types of plastic that may be used for agricultural purposes, especially those containing halogens.     

Improvement of health risk factors after reduction of VOC concentrations in industrial and urban areas

After reductions of fugitive and diffuse emissions by an industrial complex, a follow-up study was performed to determine the time variability of volatile organic compounds (VOCs) and the lifetime cancer risk (LCR). Passive samplers (3 M monitors) were placed outdoors (n?=?179) and indoors (n?=?75) in industrial, urban, and control areas for 4 weeks. Twenty-five compounds including n-alkanes, cycloalkanes, aromatics, chlorinated hydrocarbons, and terpenes were determined by GC/MS. The results show a significant decrease of all VOCs, especially in the industrial area and to a lesser extent in the urban area. The median outdoor concentration of benzene in the industrial area declined compared to the former study, around 85 % and about 50 % in the urban area, which in the past was strongly influenced by industrial emissions. Other carcinogenic compounds like styrene and tetrachloroethylene were reduced to approximately 60 %. VOC concentrations in control areas remained nearly unchanged. According to the determined BTEX ratios and interspecies correlations, in contrast to the previous study, traffic was identified as the main emission source in the urban and control areas and showed an increased influence in the industrial area. The LCR, calculated for benzene, styrene, and tetrachloroethylene, shows a decrease of one order of magnitude in accordance to the decreased total VOC concentrations and is now acceptable according to values proposed by the World Health Organization.     

Remediation of mould damaged building materials--efficiency of a broad spectrum of treatments

We compared the efficiency of some commercially available products and methods used for remediation of mould-contaminated building materials. Samples of gypsum board and pinewood were artificially contaminated with toxin-producing isolates of Stachybotrys chartarum and Aspergillus versicolor, respectively, then, ten different remediation treatments were applied according to the manufacturers' instructions. Microbial and chemical analyses of the infested materials were carried out both immediately before and after treatment, after six weeks of drying at room temperature, and after another six weeks of remoistening. The aim of the study was to determine whether the investigated methods could inhibit the mould growth and destroy some selected mycotoxins produced by the moulds. None of the decontamination methods tested could completely eliminate viable moulds. Some methods, especially boron based chemicals, ammonium based chemicals, and oxidation reduced the contents of mycotoxins produced by S. chartarum (satratoxin G and H, verrucarol), whereas the one which uses an ammonium based chemical reduced the amount of sterigmatocystin produced by A. versicolor with statistical significance. No remediation treatment eliminated all the toxins from the damaged materials. These results emphasize the importance to work preventively with moisture safety throughout the construction processes and management to prevent mould growth on building materials.     

Disaster waste management: a review article

Depending on their nature and severity, disasters can create large volumes of debris and waste. The waste can overwhelm existing solid waste management facilities and impact on other emergency response and recovery activities. If poorly managed, the waste can have significant environmental and public health impacts and can affect the overall recovery process.This paper presents a system overview of disaster waste management based on existing literature. The main literature available to date comprises disaster waste management plans or guidelines and isolated case studies. There is ample discussion on technical management options such as temporary storage sites, recycling, disposal, etc.; however, there is little or no guidance on how these various management options are selected post-disaster. The literature does not specifically address the impact or appropriateness of existing legislation, organisational structures and funding mechanisms on disaster waste management programmes, nor does it satisfactorily cover the social impact of disaster waste management programmes.It is envisaged that the discussion presented in this paper, and the literature gaps identified, will form a basis for future comprehensive and cohesive research on disaster waste management. In turn, research will lead to better preparedness and response to disaster waste management problems.