Effect of inorganic carbonate and organic matter in thermal treatment of mercury-contaminated soil

Environmental Science and Pollution Research - Thermal treatment of mercury (Hg)-contaminated soil was studied to investigate the desorption behavior of Hg at different temperatures. The soil...     

Soil Vapor Extraction and Chemical Oxidation to Remediate Chlorinated Solvents in Fractured Crystalline Bedrock: Pilot Study Results and Lessons Learned

A pilot study was completed at a fractured crystalline bedrock site using a combination of soil vapor extraction (SVE) and in‐situ chemical oxidation (ISCO) with Fenton's Reagent. This system was designed to destroy 1,1,1‐trichloroethane (TCA) and its daughter products, 1,1‐dichloroethene (DCE) and 1,1‐dichloroethane (DCA). Approximately 150 pounds of volatile organic compounds (VOCs) were oxidized in‐situ or removed from the aquifer as vapor during the pilot study. Largely as a result of chemical oxidation, TCA concentrations in groundwater located within a local groundwater mound decreased by 69 to 95 percent. No significant rebound in VOC concentration was observed in these wells. Wells located outside of the groundwater mound showed less dramatic decreases in VOC concentration, and the data show that vapor stripping and short‐term groundwater migration following the oxidant injection were the key processes at these wells. Although the porosity of the aquifer at the site is on the order of 2 percent or less, the pilot study showed that SVE could be an effective remedial process in fractured crystalline rock. © 2002 Wiley Periodicals, Inc.     

Mercury leaching characteristics of waste treatment residues generated from various sources in Korea

In this study, mercury (Hg) leaching characteristics of the waste treatment residues (fly ash, bottom ash, sludge, and phosphor powder) generated from various sources (municipal, industrial, medical waste incinerators, sewage sludge incinerator, oil refinery, coal-fired power plant, steel manufacturing plant, fluorescent lamp recycler, and cement kiln) in Korea were investigated. First, both Hg content analysis and toxicity characteristic leaching procedure (TCLP) testing was conducted for 31 collected residue samples. The Hg content analysis showed that fly ash from waste incinerators contained more Hg than the other residue samples. However, the TCLP values of fly ash samples with similar Hg content varied widely based on the residue type. Fly ash samples with low and high Hg leaching ratios (R_L) were further analyzed to identify the major factors that influence the Hg leaching potential. Buffering capacity of the low-R_L fly ash was higher than that of the high-R_L fly ash. The Hg speciation results suggest that the low-R_L fly ashes consisted primarily of low-solubility Hg compounds (Hg₂Cl₂, Hg⁰ or HgS), whereas the high-R_L fly ashes contain more than 20% high-solubility Hg compounds (HgCl₂ or HgSO₄).     

Comparison of fenton and photo-fenton processes for livestock wastewater treatment

In this study, the photochemical degradation of livestock wastewater was carried out by the Fenton and Photo-Fenton processes. The effects of pH, reaction time, the molar ratio of Fe(2 +)/H(2)O(2), and the Fe(2 +) dose were studied. The optimal conditions for the Fenton and Photo-Fenton processes were found to be at a pH of 4 and 5, an Fe(2 +) dose of 0.066 M and 0.01 M, a concentration of hydrogen peroxide of 0.2 M and 0.1 M, and a molar ratio (Fe(2 +)/H(2)O(2)) of 0.33 and 0.1, respectively. The optimal reaction times in the Fenton and Photo-Fenton processes were 60 min and 80 min, respectively. Under the optimal conditions of the Fenton and Photo-Fenton processes, the chemical oxygen demand (COD), color, and fecal coliform removal efficiencies were approximately 70--79, 70--85 and 96.0--99.4%, respectively.     

Microbial PCB dechlorination in dredged sediments and the effect of moisture

Evidence of reductive dechlorination of polychlorinated biphenyls (PCBs) in sediments was investigated in Hudson River sediments dredged and encapsulated in 1978 at Moreau, NY. The effect of different moisture contents in dredged sediments on dechlorination and dechlorinating microorganisms was also determined using PCB-spiked sediments in which the moisture level was adjusted by simulating a dewatering process. The congener pattern of PCBs indicated that the dechlorination in the dredged sediments was far less advanced than that in the river sediments collected from the general area of the dredged site (Ft. Edward site). Dechlorination in encapsulated sediments at the Moreau site appeared to have stopped soon after dredging. When microorganisms eluted from the encapsulated sediments were inoculated in clean sediments spiked with Aroclor 1242, an extensive dechlorination was observed, indicating that the encapsulated sediments still harbored dechlorinating microorganisms. However, the same inoculum failed to further dechlorinate residual congeners in the dredged sediments. On the other hand, an inoculum obtained in 1990 from the dredged site in the Hudson River dechlorinated the residual congeners further. In simulated dredged sediments, the maximum level of dechlorination was lower at reduced moisture contents. The population size of dechlorinating microorganisms, as determined by the most probable number (MPN) technique, was also smaller at the lower moisture levels. There was a significant correlation between the maximum extent of dechlorination and the specific death rate of dechlorinating populations. These results indicate that the underlying mechanism of the moisture-dependent maximum dechlorination is the moisture-dependence of the death rate of dechlorinating microorganisms.     

Removal of organic and nitrogen and molecular weight distribution of residual soluble organic from entrapped mixed microbial cells and activated sludge processes.

The simultaneous removal of organic and nitrogen and molecular weight distribution (MWD) of residual soluble chemical oxygen demand (RSCOD) in final effluent were investigated using entrapped mixed microbial cells (EMMC) and conventional activated sludge processes. Two different types of processes using EMMC carriers demonstrated better organic and nitrogen removal performance because of the high solids retention time (SRT) compared with the activated sludge process. Regarding the RSCOD, the longer SRT process (EMMC) was affected by reducing the hydraulic retention time, resulting in the increase of high-molecular-weight materials. On the other hand, reducing the aeration period had significantly affected the MWD in the shorter SRT process (activated sludge), resulting in an increase of low-molecular-weight materials.     

Background monitoring and long-range transport of atmospheric CFC-11 and CFC-12 at Kosan, Korea

The background concentrations of atmospheric CFC-11 and CFC-12were monitored to assess their impact on stratospheric ozone depletion and global warming from September 1995 to March 1999 at Kosan, Korea, located at eastern margin of the Asian Continent. The concentrations of atmospheric CFC-11 at Kosan have decreased slightly, at a rate of –2.5 pptv yr^-1, over the period in response to the Montreal Protocol. The CFC-12 mixing ratio at Kosan continues to increase in the atmosphere at a rate of 5.7 pptv yr^-1 despite international regulations, because of its extreme atmosphere persistence. Recent trends ofthese two chlorofluorocarbons at Kosan, Korea were concordant with those of the northern hemispheric background monitored unitat Mauna Loa, Hawaii. The maximum seasonal mean mixing ratios of CFC-11 and CFC-12 at Kosan, Korea, were 270±4 pptv inthe spring and 538±9 pptv in the winter, and the corresponding seasonal minima were 267±7 and 529±12 pptv. This occurred in the summer and was due to southeasterlywinds from the northwestern Pacific Ocean. By performing a three-day isentropic backward trajectory analysis, it was shownthat air masses at Kosan, and with the exception of summer, mainly originated from central and northern China. In particular, the mixing ratios of these two contaminant speciesare closely related with their air mass trajectories.     

Cost-effective monitoring for a soil vapor extraction (SVE) system: a simplified modeling and gas sensor test

In order to establish cost-effective monitoring strategies for soil vapor extraction (SVE), a simplified model for multi-component mass transfer of a complex liquid mixture in porous media and gas sensor are proposed and experimentally evaluated. The basic task for the cost-effective monitoring of SVE is to decide how to predict the performances of venting systems in terms of the contaminant vapor removal rate and the time required to accomplish the clean-up specification. The method includes classifying of individual components of a complex mixture on the basis of gas chromatographic (GC) profile and treating each resulting group as a pseudo-single compound. BTEX components of gasoline were selected for model input and the remainders were divided into 4 groups based on their GC retention times. The model proposed in this study is capable of predicting with accuracy volatilization behaviors of gasoline components in soil and the gas sensor (FIGARO TGS 823) was tested by GC-FID to toluene and TPH-GRO(Total Petroleum Hydrocarbon-Gasoline Range Organics) gas samples. A VOC gas sensor was developed which recognizes TPH-GRO concentrations between 250 and 50 ppm. The developed gas sensor test and proposed model can be used as a valuable tool for the cost-effective monitoring for SVE systems.     

Comparison of seven indicator PCBs and three coplanar PCBs in beef, pork, and chicken fat

The risk assessment of polychlorinated biphenyls (PCBs) is difficult since complex congeners were used in many industrial applications for a long period of time and the residue monitoring in foods of animal origin and the environment were not established in comparable systems. The relationships of determined concentrations in indicator PCB congeners (mono- and di-ortho PCBs) and coplanar PCB congeners (non-ortho PCBs) in livestock products are presented in this study. The concentrations of seven indicator PCBs were compared with three coplanar PCBs in beef, pork, and chicken fat. Distributions of concentration for the indicator PCBs in three different animal species were similar except for that of PCB-118 (2,3',4,4',5-pentachlorobiphenyl) in pork fat. The congeners with the highest concentration were PCB-138 (2,2',3,4,4',5'-hexachlorobiphenyl) in beef and pork fat and PCB-28 (2,4,4'-trichlorobiphenyl) in chicken fat. The bioaccumulation and metabolism of PCBs in animal species represent different congener profiles in livestock products. The percentage of the total concentration of three coplanar PCBs was about 2% of the total concentration of the seven indicator PCBs. Relatively high concentration of mono-ortho and di-ortho PCBs in fat samples of livestock products may be calculated with the concentration of coplanar PCBs that can be usually determined on a sequential procedure with dioxin analysis. Therefore, the relationship of the amounts between seven indicator PCBs and three coplanar PCBs may be useful to derive the composition and level of contaminants in beef, pork, and chicken.