The characteristics of fatal occupational injuries in Korea’s construction industry, 1997–2004

This study is aimed at exploring the characteristics of fatal occupational injuries in Korea’s construction industry and comparing the causes in various occupations within that industry. There were 10,276 fatal occupational injury victims in Korea over 8 years (1997–2004). The mortality risk due to injuries in construction and non-construction industries was calculated, and their causes were compared. The number of victims of fatal occupational injuries in the construction industry was 4333 (42.2% of the total fatal occupational injuries), and the 1 year mortality risk was higher (23.7/100,000 persons) than in non-construction industries (10.4). Falling was the most frequent (52.7%) cause of fatal injuries. In addition, deaths due to structural collapse and electric shock were significantly higher than in other industries. When the distribution of the causal factors in various occupations within the construction industry was investigated, some factors appeared more frequently in certain occupations than in others. As the construction industry encompasses a large proportion of occupational injuries, a reduction in this field alone will substantially contribute to an overall reduction of occupational injuries in Korea. Further research for effective prevention is needed.     

The impacts of the waterfront development in Iskandar Malaysia

The increasing number of waterfront projects shows that the concept of waterfront development has contributed to the advancement of the Malaysian construction industry. This study seeks to assess the impacts of the implementation of waterfront development in Iskandar Malaysia eliciting the perceived relative importance of these impacts. A comprehensive literature review has been conducted to collate the potential impacts of the waterfront development. A total of 363 sets of questionnaires were distributed to the contractors and developers registered under G7 category of the Construction Industry Development Board in Malaysia. Results show that the most significant influence of the waterfront development is related to economic benefits, while environmental impacts are not considered as a priority for this category of stakeholders. In addition, this study also indicates that the implementation of the waterfront projects has generated numerous job opportunities within the developed region. Moreover, exchanging knowledge in the planning and managing of the waterfront development is imperative to the development of the waterfront projects. Nevertheless, the shortcomings of these developments, such as the negative environmental impact on natural beaches and the coastline (i.e. pollution) as well as human-related issues (i.e. excessive human settlement), should not be taken lightly. This research confirms that the reclamation of land for waterfront development is closely correlated with the destruction of these natural structures.     

Urinary levels of phthalate metabolites and associations with demographic characteristics in Korean adults

The objective of this study is to assess human exposure to phthalates and its associations with demographic characteristics of the subjects in the Korean National Human Biomonitoring Survey. The subjects aged between 18 and 69 were selected through nationwide stratified sampling. A total of 1874 urine samples were collected and stored at ?20 °C until measurement for ten selected metabolites of phthalates (MnBP, MiBP, MBzP, MCHP, MnOP, MEHP, MEOHP, MEHHP, MiNP, and MiDP) using high-performance liquid chromatography-tandem mass spectrometry (LC-MS/MS). The difference in the level of urinary phthalate metabolites by the characteristics of the subjects was tested for statistical significance using SAS Surveyreg procedure. The coefficients and standard errors from multiple linear regressions were exponentiated to estimate the adjusted proportional change (APC) and 95% CIs compared with a referent level. The proportion of data above LOQ was less than 20% for MCHP, MnOP, MiNP, and MiDP. Geometric means of creatinine-adjusted concentrations (unit: μg/g creatinine) of six other phthalate metabolites among Korean adults were 41.7 (95% CI 39.6–43.9) for MnBP, 17.1 (95% CI 16.1–18.1) for MiBP, 15.7 (95% CI 14.4–17.1) for MBzP, 8.65 (95% CI 8.10–9.22) for MEHP, 17.5 (95% CI 16.8–18.3) for MEOHP, and 38.1 (95% CI 36.2–40.2) for MEHHP. Urinary level of phthalates tended to be higher among subjects with older age, females, and those with vigorous daily physical activity and tended to be lower among drinkers and those with higher income. Our results suggest that the level of phthalate exposure is significant among Korean adults and thus warrants further studies to identify major source and route of exposure to phthalates.     

Cancer risk from gaseous carbonyl compounds in indoor environment generated from household coal combustion in Xuanwei,China

Airborne carbonyls were characterized from emitted indoor coal combustion. Samples were collected in Xuanwei (Yunnan Province), a region in China with a high rate of lung cancer. Eleven of 19 types of samples (58%) demonstrated formaldehyde concentrations higher than the World Health Organization exposure limit (a 30-min average of 100 μg m^?3). Different positive significant correlations between glyoxal/methylglyoxal and formaldehyde/acetaldehyde concentrations were observed, suggesting possible different characteristics in emissions between two pairs of carbonyl compounds. A sample in the highest inhalation risk shows 29.2 times higher risk than the lowest sample, suggesting different coal sampling locations could contribute to the variation of inhalation risk. Inhabitants in Xuanwei also tend to spend more time cooking and more days per year indoors than the national average. The calculated cancer risk ranged from 2.2–63 × 10^?5, which shows 13 types of samples at high-risk level. Cumulative effect in combination with different carbonyls could have contributed to the additive actual inhalation cancer risk. There is a need to explicitly address the health effects of environmentally relevant doses, considering life-long exposure in indoor dwellings.     

pH-gradient real-time aeration control for nitritation community selection in a non-porous hollow fiber membrane biofilm reactor (MBfR) with dilute wastewater

Nitritation (ammonium to nitrite) as a pre-treatment of Anammox (anaerobic ammonium oxidation) is a key step for an energy-efficient nitrogen-removal alternative from dilute wastewaters, e.g. anaerobically-treated sewage, with which limited study has achieved sustainable nitritation at ambient temperature and short hydraulic retention times. To this end, pH-gradient real-time aeration control in an oxygen-based membrane biofilm reactor was observed at 20 °C in the sequencing batch mode. An optimum oxygen supply via diffusion for ammonium-oxidizing bacteria (AOB) was established, but nitrite-oxidizing bacteria (NOB) could be inhibited. The system achieved nitrite accumulation efficiencies varying from 88% to 94% with the aeration control. Mass balance and rate performance analyses indicate that this aeration control is able to supply an oxygen rate of 1.5 mol O₂ mol^?1 ammonium fed, the benchmark oxygenation rate based on stoichiometry for nitritation community selection. Microbial analyses confirmed AOB prevalence with NOB inhibition under this aeration control.     

Air–water exchange fluxes of polycyclic aromatic hydrocarbons in the tropical coast,Taiwan

Air–water exchange fluxes of polycyclic aromatic hydrocarbons (PAHs) were simultaneously measured in air and water samples from two sites on the Kenting coast, located at the southern tip of Taiwan, from January to December 2010. There was no significant difference in the total PAH (t-PAH) concentrations in both gas and dissolved phases between these two sites due to the less local input which also coincided to the low levels of t-PAH concentration; the gas and dissolved phases averaged 1.29 ± 0.59 ng m^?3 and 2.17 ± 1.19 ng L^?1 respectively. The direction and magnitude of the daily flux of PAHs were significantly influenced by wind speed and dissolved PAH concentrations. Individual PAH flux ranged from 627 ng m^?2 d^?1 volatilization of phenanthrene during the rainy season with storm–water discharges raising dissolved phase concentration, to 67 ng m^?2 d^?1 absorption of fluoranthene during high wind speed periods. Due to PAH annual fluxes through air–water exchange, Kenting seawater is a source of low molecular weight PAHs and a reservoir of high molecular weight PAHs. Estimated annual volatilization fluxes ranged from 7.3 μg m^?2 yr^?1 for pyrene to 50 μg m^?2 yr^?1 for phenanthrene and the absorption fluxes ranged from ?2.6 μg m^?2 yr^?1 for chrysene to ?3.5 μg m^?2 yr^?1 for fluoranthene.     

Microwave-induced nanoscale zero-valent iron degradation of perchloroethylene and pentachlorophenol

Microwave (MW) is applied to enhance perchloroethylene (PCE) or pentachlorophenol (PCP) removal using zero-valent iron (ZVI; Fe⁰) as the dielectric medium. ZVI has a much higher dielectric loss factor (39.5) than other media; it is capable of absorbing MW radiation rapidly to speed up the release of electrons, leading to rises of the ZVI particle surface temperature. If the MW power is continued, excessive electricity will accumulated inside ZVI particles, resulting in sparks. The results show that during the initial 5 sec (700 W), the linear aliphatic PCE has a faster decomposing rate than the ringed PCP (82.0% vs. 4.8%) because less energy is required for decomposing the linear-chlorine bond (90 kcal mol^?1) than ring-chlorine bonds (95 kcal mol^?1). Later, the removal rate for either PCE or PCP remains the same when the exposure time is between 5 and 60 sec. Without MW irradiation, linear PCE molecules have larger surface area to contact ZVI, and hence they have better removal efficiencies than PCP molecules. Using Fe⁰ as a microwave dielectric medium to treat PCE or PCP is a new and worthwhile treatment technology; it is environmentally friendly, and its use will eliminate the secondary pollution.

Implications Nanoscale iron particles are characterized by high surface-area-to-volume ratios, high specific surface area, and high surface reactivity. With a much higher dielectric loss factor, it is capable of absorbing MW radiation rapidly to speed up the release of electrons, leading to rise in temperature. The time needed to achieve a satisfactory treatment is also reduced, leading to significant saving of energy consumption to make this method cost-effective and also environmentally friendly for the industry to pursuit sustainable development.     

Characterizing Driving Patterns for Zhuhai for Traffic Emissions Estimation

Abstract

Zhuhai, a relatively less developed city on the western coast of the Pearl River Delta (PRD) of China, is planning to undergo major development in coming years. A Hong Kong-Zhuhai-Macao Bridge project has been approved by the Central Government of China. The project will have great impact on the driving pattern and vehicular emissions to the city. This baseline study collected speed-time data of two instrumented private cars in morning and evening periods, as well as a daytime nonpeak period of >10 consecutive days in the spring and winter of 2003. The authors used the microwave speed sensor and global positioning system installed in the instrumented cars and used car-chasing technique to perform the data collection. They used the statistical package SPSS to assess the consistency, as well as to evaluate the variability of the data. Nine parameters, namely, average speed, average running speed, average acceleration rate, average deceleration rate, mean length of a driving period, time proportions of driving modes, average number of acceleration-deceleration changes, root mean square acceleration, and positive acceleration kinetic energy are calculated to represent the driving characteristics. A driving cycle for private cars was developed. If emission tests were conducted using the Zhuhai driving cycle, the level of vehicle emissions measured is likely to be in between that of the Federal Test Procedure (FTP) cycle and the Melbourne Peak cycle.     

Ozone Artifacts and Carbonyl Measurements Using Tenax GR,Tenax TA,Carbopack B,and Carbopack X Adsorbents

Abstract

Four popular thermally desorbable adsorbents used for air sampling (Tenax TA, Tenax GR, Carbopack B, and Carbopack X) are examined for the potential to form artifacts with ozone (O₃) at environmental concentrations. The performance of these adsorbents for the ketone and alde-hyde species identified as O₃-adsorbent artifacts was also characterized, including recovery, linearity, and method detection limits (MDLs). Using gas chromatography/mass spectrometry, 13 different artifacts were identified and confirmed for both Tenax TA and Tenax GR, 9 for Carbopack B, but none for Carbopack X. Several O₃ artifacts not reported previously were identified, including: pentanal, 3-hexanone, 2-hexanone, hexanal, 3-heptanone, and heptanal with Tenax TA; pentanal, 3-hexanone, 2-hexanone, hexanal, and 3-heptanone on Tenax GR; and 1-octene and 1-nonene with Carbopack B. Levels of straight-chain aldehyde artifacts rapidly diminished after a few cycles of adsorbent conditioning/O₃ exposure, and concentrations could be predicted using a first-order model. Phenyl-substituted carbonyl artifacts (benzalde-hyde and acetophenone) persisted on Tenax TA and GR even after 10 O₃ exposure-conditioning cycles. O₃ breakthrough through the adsorbent bed was most rapid in adsorbents that yielded the highest levels of artifacts. Overall, artifact composition and concentration are shown to depend on O₃ concentration and dose, conditioning method, and adsorbent type and age. Calibrations showed good linearity, and most compounds had reasonable recoveries, for example, 90 ±15% for Tenax TA, 97 ±23% for Tenax GR, 101 ±24% for Carbopack B, and 79 ±25% (91 ±9% for n-aldehydes) for Carbopack X. Benzeneacetaldehyde recovery was notably poorer (22–63% across the four adsorbents). MDLs for several compounds were relatively high, up to 5 ng. By accounting for both artifact formation and method performance, this work helps to identify which carbonyl compounds can be measured using thermally desorbable adsorbents and which may be prone to bias because of the formation of O_3- adsorbent artifacts.