Time of flight secondary ion mass spectrometry studies of the distribution of metals between the soil, rhizosphere and roots of Populus tremuloides Minchx growing in forest soil

Time of flight secondary ion mass spectroscopy has been used to study the metal distribution at the soil/root interface of tree roots extracted from smelter-impacted soils. The results, augmented by scanning electron microscopy, show that the technique is capable of resolving metal distributions at the cellular level. In addition, the distribution of metals between the root plaque and the root interior may be useful in interpreting local metal transport mechanisms.     

Roadside particle number distributions and relationships between number concentrations, meteorology, and traffic along a northern California freeway

Particle number distributions were measured simultaneously upwind and downwind of a suburban-agricultural freeway to determine relationships with traffic and meteorological parameters. Average traffic volumes were 6330 vehicles/hr with 10% heavy-duty vehicles, and volumes were higher in July than November. Most downwind particle number distributions were bimodal, with a primary mode at approximately 10-25 nm, indicating that newly formed particles were sampled. Total downwind 6-237 nm particle number concentrations (Ntot) ranged from 9.3 x 10(3) to 2.5 x 10(5) cm(-3), with higher daily average concentrations in November compared with July. Ntot correlated with wind speed, temperature, and relative humidity. Upwind photochemically initiated nucleation likely led to elevated background nanoparticle concentrations in July, as evidenced by increasing upwind distribution modal diameter with increasing temperature and a strong correlation between upwind Ntot and solar radiation. Also in summer, Ntot showed stronger correlation with heavy-duty vehicle volumes than wind speed, temperature, and relative humidity. These results indicate the importance of measuring background particle size distributions simultaneously with roadside distributions. There may be a minimum vehicle volume from which useful real-world vehicle particle number distributions can be measured at roadside, even when collecting samples within 10 m of the traveled lanes.     

Transfer of hexazinone and glyphosate through undisturbed soil columns in soils under Christmas tree cultivation

Field studies monitoring pesticide pollution in the Morvan region (France) have revealed surface water contamination by some herbicides. The purpose of this study was to investigate in greater detail the transport of two herbicides, used in Christmas tree production in the Morvan, under controlled laboratory conditions. Thus, the leaching of hexazinone (3-cyclohexyl-6-dimethyl-amino-1-methyl-1,3,5-triazine-2,4 (1H,3H) dione) and glyphosate (N-(phosphono-methyl-glycine)) through structured soil columns was studied using one loamy sand and two sandy loams from sites currently under Christmas tree cultivation in the Morvan. The three soils were cultivated sandy brunisol [Sound reference base for soils, D. Baize, M.C. Girard (Coord.), INRA, Versailles, 1998, 322 p] or, according to the FAO [FAO, World reference base for soil resources, ISSS-ISRIC-FAO, FAO, Rome, Italy, 1998], the La Garenne was an arenosol and the two other soils were cambisols. The clay contents of the soils ranged from 86 to 156 g kg(-1) and the organic carbon ranged from 98 to 347 g kg(-1). After 160 mm of simulated rainfall applied over 12 days, 2-11% of the applied hexazinone was recovered in the leachate. The recovery was much higher than that of glyphosate, which was less than 0.01%. The greater mobility of hexazinone might be related to its much lower adsorption coefficient, K(oc), 19-300 l kg(-1), compared with 8.5-10231 l kg(-1) for glyphosate (literature values). Another factor that may explain the higher amounts of hexazinone recovered in the leachates of the three soil columns is its greater persistence (19.7-91 days) relative to that of glyphosate (7.9-14.4 days). The mobility of both herbicides was greater in the soils with higher gravel contents, coarser textures, and lower organic carbon contents. Moreover, glyphosate migration seems negatively correlated not only to soil organic carbon, but also to aluminium and iron contents of soils. This soil column study suggests that at the watershed scale, surface water contamination by hexazinone could occur via the horizontal subsurface flow in upper centimeters of soil. In contrast, the surface water contamination with glyphosate by this mechanism appears unlikely.     

Prediction of ozone concentration in ambient air using multivariate methods

Multivariate statistical methods including pattern recognition (Principal Component Analysis--PCA) and modeling (Multiple Linear Regression--MLR, Partial Least Squares--PLS, as well as Principal Component Regression--PCR) methods were carried out to evaluate the state of ambient air in Miskolc (second largest city in Hungary). Samples were taken from near the ground at a place with an extremely heavy traffic. Although PCA is not able to determine the significance of variables, it can uncover their similarities and classify the cases. PCA revealed that it is worth to separate day and night data because different factors influence the ozone concentrations during all day. Ozone concentration was modeled by MLR and PCR with the same efficiency if the conditions of meteorological parameters were not changed (i.e. morning and afternoon). Without night data, PCR and PLS suggest that the main process is not a photochemical but a chemical one.     

Sorption of lead in soil as a function of pH: a study case in México

Reactions of lead sorption onto soil are largely affected by properties and composition of soil and its solution. In this study, the lead sorption onto regosol eutric soil from Francisco I. Madero, Zacatecas, Mexico is evaluated at different pH values. Soil samples were suspended in lead solutions of 10, 25, 50, 100, 150, 200, 300, and 400 mg/l (as Pb(NO3)2). The pH was adjusted at 2, 3, 4, and 5.5 with nitric acid for each of the lead solution concentrations. In all the cases the ionic strength was I=0.09 M with calcium nitrate. The solid-liquid-ratios were fixed in 1:100 and 1:200 g/ml. The results show that lead sorption increases when pH increases. Experimental isotherms were adjusted by both Langmuir and Freundlich models. The Langmuir affinity parameter, K, indicates that the lead sorption capacity of Francisco I. Madero soils is largely perceptible to pH changes.     

Modelling of the life cycle of Chironomus species using an energy-based model

Little is known about the differences between the species of the genus Chironomus relatively to their life cycle strategies. This knowledge is however crucial to fully understand the response of the Chironomus community to field perturbations. Here, we proposed to study four Chironomus species by using an energy-based model to describe growth, emergence and reproduction. We used data from the literature for two species (Chironomus plumosus and Chironomus tentans) and data from our experiments for two other species (Chironomus prasinus and Chironomus riparius). We showed that our model is able to accurately describe the life-history attributes for all the species tested, which suggests that Chironomus species have the same fundamental characteristics (low maintenance energetic costs, isomorphism), which makes possible the building of a common modelling framework to assess effects of toxicants at individual and population level. The species showed a few differences relatively to the parameters of the models with possible consequences when assessing effects of chemicals on Chironomus community. For instance, due to differences in growth parameters, C. riparius population dynamics should be more sensitive to effects on individual growth than C. prasinus or C. plumosus ones.     

Inclusion complexes of alpha- and gamma-cyclodextrins and the herbicide norflurazon: I. Preparation and characterisation. II. Enhanced solubilisation and removal from soils

The interaction of norflurazon with alpha- and gamma-cyclodextrins (CDs) yielded the formation of inclusion complexes at a 1:1 stoichiometric ratio in solution and in the solid state. Apparent stability constants of 50.7+/-1.6 and 37+/-1.7 M(-1) and an increase in herbicide solubility by up to five and fourfold for alpha- and gamma-CD, respectively, were determined from the phase solubility diagrams at 25 degrees C in water. Three processing methods (kneading, spray-drying and vacuum evaporation) were used to prepare norflurazon-CD solid inclusion complexes, which were characterised by infrared spectroscopy, differential scanning calorimetry and scanning electron microscopy. A high increase in the norflurazon dissolution rate was obtained with all the solid complexes with gamma-CD, but when alpha-CD was used, only the solid system obtained after the vacuum evaporation process showed a higher dissolution rate. This finding is a first step in the development of new, environmentally sound formulations of norflurazon (NFL), due to the capacity for increasing its dissolution rate and hydrosolubility, and thus diminishing the use of organic solvents. On the other hand, the effect of alpha- and gamma-cyclodextrin on the solubility of norflurazon in solution was also considered as a way of modifying its behaviour in the soil environment. Desorption studies of NFL from soils in the presence of alpha- and gamma-cyclodextrin were carried out using a batch equilibration method. The results obtained showed that alpha- and gamma-cyclodextrin greatly increased the removal of norflurazon previously adsorbed, proving the potential use of these CDs for in situ remediation of pesticide-contaminated soils.     

The economic benefits of fulfilling the World Health Organization’s limits for particulates: A case study in Algeciras Bay (Spain)

Algeciras Bay is an important industrial and port zone in the south of Spain whose pollution by particulate matter surpasses the threshold levels recommended by the World Health Organization (WHO) in its 2005 Guide on Air Quality. This study analyses the mortality avoided and the economic benefit which would be derived from a reduction of the pollution of PM2.5 and PM10 to the levels recommended by the WHO in Algeciras Bay in the period 2005-2015. The analysis carried out shows that the industrial zones, such as Los Barrios and San Roque, are those which have greater levels of pollution and in which the relative risk is greater. The calculations for Algeciras Bay between 2000 and 2015 show 182 deaths which would be avoided if the particulate matter pollution were reduced to the levels recommended by the WHO. Likewise, the economic valuation which this impact has on health is carried out through two concepts: the cost of illness and the Value of Statistical Life (VSL). The result shows that the economic benefit that would come out with the cost of illness valuation is 5,329,110€ and from the VSL is 414,787,113€.

Implications: PM_2.5 has a greater concentration in industrial localities and is linked to the industrial activity. When the particulate matter pollution is reduced to the levels recommended by the WHO in an industrialised area such as Algeciras (Spain), 182 deaths which would be avoided. The result shows that the economic benefit that would come out with the cost of illness valuation is 5,329,110€ and from the value of statistical life is 414,787,113€.     

Plasma ALP activity and blood PCV value changes in chick fetuses due to exposure of the egg to different xenobiotics

The effects of two polycyclic aromatic hydrocarbon (PAH) compounds (benz(k)fluoranthene and fluoranthene) and two heavy metals (cadmium and lead) were studied on the alkaline phosphatase (ALP) enzyme activity and hematocrit (PCV) values in chick fetuses. Eggs were exposed to one of the four compounds before incubation, by applying two exposure methods: injection (into the air cell) or immersion. Fluoranthene, cadmium and lead injection significantly decreased ALP activity compared to the control, while none of the compounds caused significant reduction in ALP activity in the immersion groups; however, a decreasing tendency was seen in these groups as well. Hematocrit values were increased after benz(k)fluoranthene immersion, fluoranthene immersion and cadmium injection. However, the doses in this study are relatively low (compared to other ecotoxicological studies in birds), the alteration in ALP enzyme activity and PCV values was apparent in each treatment group and is indicative of the high sensitivity of chick fetuses.     

Chemical and bacterial changes during laboratory conditioning of formulated and natural sediments

Within the framework of toxicity testing using formulated sediment, a conditioning treatment prior to toxic contamination has been examined. This preliminary step enables the bacterial colonisation of the sediment, the initiation of organic matter degradation, and the establishment of stable biological and physico-chemical conditions. The treatment involved in keeping the formulated sediment under water in conditions similar to that chosen for toxicity tests. The behaviour of a formulated sediment was compared with a natural sediment. The monitoring of physico-chemical and biological parameters of sediment and water column was carried out over a 30-day incubation in two laboratories. The parameters of pH and redox, dissolved organic carbon (DOC), NH4 and NO2, total organic carbon (TOC) were measured. The bacterial community was characterised by the determination of bacterial density, in total bacteria number or colony forming units (CFU), several exoenzymatic activities (P-glucosidase, xylosidase, leucine-amino-peptidase phosphatase and sulfatase activities), and three gas productions (CO2, N2O and CH4). The same experiment was carried out with a natural sediment. A 10- to 15-day conditioning allowed a physico-chemical stabilisation and corresponded to kinetic changes in hydrolysis activities. As compared to data of the natural sediment, the biological activity of the formulated sediment showed a different dynamic with lower activity levels. For both sediments, an important decrease of activities levels was observed after 15 days because of a substrate limitation. The work showed that a preliminary conditioning treatment of a formulated sediment provides the stabilisation of parameters that can affect toxicant bioavailability. Additional research is needed to determine the real influence of conditioning on the bioavailability of contaminants. The possible advisability of organic matter input, to maintain the sediment bacterial activity, has to be studied.